ReviewsHydraulic Terminal Crimping Press

Glarks 260Pcs M3 M4 M5 M6 M8 M10 Copper Ring Terminal Assortment Set Non-Insulated Copper Ring Lugs Open Barrel Wire Crimp Connectors Kit

♚ [What You Get]: This kit includes 260pcs m3, m4, m5, m6, m8 and m10 open barrel connector, which are m3x50pcs, m4x50pcs, m5x50pcs, m6x50pcs, m8x30pcs, m10x30pcs. These crimp terminals with different sizes can help you cope with wires of various sizes..
♚ [Premium Copper]: The terminal connectors are made of high-quality copper, anti-corrosion and anti-rust, and have a long service life. At the same time, this material also has high electrical conductivity, which is helpful for you to connect cables..
♚ [Easy Crimping]: Our products adopt open port barrel design, this makes it very easy to insert wires. You only need to put the wire of the corresponding size into the terminal and press it with crimping pliers..
♚ [Good Workmanship]: The terminal connectors are produced strictly according to standards and have precise dimensions. The surface of the terminal is smooth, clean and free of burrs, so it will not harm the cable..
♚ [Widely Application]: These terminals can be closely connected to your cables, and can be widely used in automobiles, railways, shipbuilding, electricity, machinery and household appliances..

Check Stock

RIDGID RP 340-B Press Tool - 43348 Hydraulic Crimping Tool Jaws Not Included - ProPress Tool Jaws, PureFlow MegaPress, Standard Series Jaws and Rings Compatible (Cordless)

Improved RIDGID Pressing Tool design is 30% smaller to increase maneuverability and a a 17% lighter tool reducing operator fatigue*.
LED-light built into the pressing tool for continued pipe joining operations of this hydraulic crimping tool in no or low-light environments.
At 42,000 cycles it's the Longest service Interval in the industry and 31% longer than previous models.
Cordless hydraulic crimping tool uses powerful an 18V Advanced Lithium 4aHr battery to produce 400 presses per charge for more uptime.
Compatible with all RIDGID Standard Series Jaws with up to a 4 inch capacity for copper / stainless steel or 2 inch PEX including RIDGID ProPress, MegaPress, Pureflow, XL-C, and Press Snap.

Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..

Check Stock

Lincoln Electric KH538 Lug/Cable Crimping Tool Pack of 1 ,Black

Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180°....
【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
【Easy operation】The mold can be easily replaced by one-way fixed latch.

Check Stock

Solsop Battery Cable Crimping Tool from AWG 8, 6, 4, 2, 1, 1/0, Battery Cable Lug Crimper for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

The battery terminal crimper has 6mm2/10mm216mm2/25mm2/35mm2/50mm2(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
Battery cable crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
Comfortable Operation Handles - Comfortable grip with anti-slip surface saves strength and improves user's experience.
Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.

Check Stock

Solsop Battery Cable Crimping Tool from AWG 8, 6, 4, 2, 1, 1/0, Battery Cable Lug Crimper for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

The battery terminal crimper has 6mm2/10mm216mm2/25mm2/35mm2/50mm2(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
Battery cable crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
Comfortable Operation Handles - Comfortable grip with anti-slip surface saves strength and improves user's experience.
Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.

Check Stock

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..

Check Stock

Brileine Battery Cable Crimping Tool from AWG 8-1/0, Battery Cable Lug Crimper Tool for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

The Battery Terminal Crimper - Built in 6 ways 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
Comfortable Ergonomics Design Handles - Comfortable grip with Anti-slip surface saves strength and improves user's experience.
Easy Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
Battery cable crimper with high precision jaw design ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
Widely Application in the Copper & Aluminum Cable lug and Non-Welding & Standard Electrical Connection.

Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

✅ 【Adjustable Crimping Tool】With an automatic adjustment ratchet mechanism, an adjustable locking device, and the function of releasing pressure points. crimper tool is designed to crimp 24-14 AWG non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
✅【Widely Application】The combination of crim....

Check Stock

Zhushan Battery Cable Lug Crimping Tool Kit, Electrical Lug Crimper 10-1/0 AWG with 60Pcs Copper Ring Terminals Set for Heavy Duty Wire Crimper for Battery Terminal

【Crimp Tool Kit Includes】1 x Battery Cable Lug Crimping Tool and 60 x Copper Ring Terminal Connectors.
【6 Swivel Crimping Dies】Battery cable crimpers feature10 ,8, 6, 4, 2, 1/0 AWG (6mm²/10mm²/16mm²/25mm²/35mm²/50mm²) dies that use spring loaded locking pin swivel heads to resize.
【Easy Operation】The non-slip rubber coated handle of this crimping tool is more comfortable and convenient to use. Just press down on the screw, rotate the crimp to the size you need, and simply crimp the cable lug to complete the crimp.
【Ergonomic Design】Ergonomic, cushioned, non-slip handle, the tool handle of the crimping pliers is wrapped with soft rubber, and the lever structure design can increase the friction force, making the work more comfortable and labor-saving.
【Application】Widely used in copper, aluminum cable lugs and non-solder and standard electrical connections.

Check Stock

IWISS Open Barrel Terminal Crimping Tool for Molex Style DELPHI AMP TYCO Deutsch Terminals Crimper, Molex Crimping Tool,24-14 AWG

Open Barrel Terminal Crimper: IWS-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
Deutsch Stamped Contact Size 16 Crimp Tool: Designed for crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18. Series: DT,HD30,HDP20,DRC,HD10,DRB,DTV.AEC,STRIKE,Jiffy Splice..
Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination..
B Profile Crimps: Insulation crimps are "B" type and are produced in two cavities.: 18-14 AWG and 24-20 AWG. Conductor crimps are "B" type and are produced in three cavities: 16-14 AWG, 20-18 AWG and 24-22 AWG..
IWS-1424A universal “U” Barrel Crimp Tool is perfect for 24 to 14 gauge wire used with AMP, Deutsch, Delphi or any other stamped terminal. A must when servicing any motorcycle. Made from high quality carbon steel with black oxide finish for corrosion resistance and durability..

Check Stock