ReviewsHydraulic Trailer Jack

LEORAY Jack Wheel Chock, Reinforced Rubber Jack Caster Wheel Dock for Caravans and Trailers

  • ...hole prevents rain from building up and causing rust damage. The jack wheel chock keeps your jack wheel clean and prolongs its service life..
  • MADE TO LAST - Made from premium nitrile rubber material in one-piece molding, the chock is super heavy duty and reasonably resistant to oil, water, gasoline, propane and some hydraulic fluids. It will keep your Jack Wheel safe for years and years..
  • ODORLESS & EASY TO STORE - Being treated with high temperature vulcanization, it is durable, odorless, nontoxic and endures extreme outdoor temperature. With a portable size of 6.6 in x 5 in x 1.38 in, the chock could be easily stored in your car..
  • NO-RISK PURCHASE - Your satisfaction is our top priority which is why we make sure that every product you receive from us is made with high quality raw materials and is defect-free. Our jack wheel dock comes with unconditional 30-Day refund warranty. Do not hesitate to contact us if you need any help..
Check Stock

CURT 28112 Marine Boat Trailer Jack with 6-Inch Wheel 1,200 lbs 11 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,200 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to....
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack wheel.
  • EASY OPERATION. This trailer tongue jack allows for 11 inches of vertical movement and operates using a side-wind handle (12-1/2-inch retracted....
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up....
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a....
Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
  • EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.
Check Stock

E-HEELP Electric Car Jack 5Ton 12V Hydraulic Car Jack Kit with Electric Impact Wrench for SUV MPV Sedan Truck Change Tires Garage Repair

  • [Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks..
  • [Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is..
  • [Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time....
Check Stock

ZCONIEYE 3 Wire Dump Trailer Remote Control Switch 12V for Single Acting Hydraulic Pumps Power Units Lift Dump Truck…

  • [Functions] Great ZCONIEY up down switch remote controller replacement for dump trailer, dump truck, lift gate, lift dump, elevator lifter, stackers....
  • [Wide Applications] Fits most single-acting / double-acting hydraulic pumps power units including MTE, Monarch, Bucher Dyna-Jack, SPX, KTI, Bosch and....
  • [Strong and Durable] The pendant stations of ZCONIEY remote control are made of high quality ABS material and well constructed for long-term use..
  • [Easy to Wire Up] 3 Wires -- Brown(power), Yellow(down), Blue(start) / 4 Wires -- Red(Power), Blue(Raise), Yellow (Down), Black(Start )..
  • [Package] Mounting holster + convenient magnetic back + 3 Wires (16' cord long enough to stand at the back of dump trailer while dumping the load).
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock

E-HEELP Electric Car Jack 5Ton 12V Kit Car Jack Hydraulic (Lifting Range: 6.1~17.7 inch) with Inflator Electric Jack for Car SUV Sedan MPV Change Tires Garage Repair Emergency Kit

  • [Powerful Electric Car Jack] E-HEELP electric car jack is hydraulic driven, enabling it to lift vehicles weight less than 5 tons (11023 lbs) and only takes less than 2 mins to lift to its MAX height. The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV and truck. The powerful hydraulic strenth is more competitive than an other car jacks..
  • [Universal Applied] Car jack hydraulic has two ways of power supply: battery clip with 12V DC power socket and car cigarette lighter. The high-power motor nearly matches all the vehicles in the market, sedan, SUV, MPV, truck, pickup. Morever, you can use the car jack on your motorcycle, or some other heavy items. Please make sure you operate carefully on the flat ground and the load weight never exceed its MAX..
  • [Easy Pumping] With a tire inflator pump installed in the electric car jack, no need to worry about the tire-broken emergency in the middle of nowhere. Equipped with tire pressure display, you can monitor the tire pressure while pumping. Now, Say goodbye to troublesome tire-changing things!.
  • [Multi-scene Application] This portable....
Check Stock

CURT 28204 A-Frame Trailer Jack, 2,000 lbs, 15 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 15 inches of vertical movement and can be fully retracted for towing (9-1/4-inch retracted height, 24-1/4-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28250 A-Frame Trailer Jack 5,000 lbs 14-1/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock