ReviewsHydraulic Tube Bender

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock

Antstone Tubing Bender Kit with Reverse Bend 1/4"-7/8" HVAC Ratchet Copper Pipe Bender Tool Set 90° Bend with 7 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • applicable pipes: for soft copper / brass pipes only..
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Forward & Reverse Bending] - The pipe bender can be bent in both forward and reverse directions to meet the needs of your different workplaces..
  • [Compact & Portable] - This hvac tool kit has a compact design, making it easy to work in tight spaces, which includes: pipe bender body*1, deburring knife*1, bending groove*2, dies*7, thicken toolbox*1..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

hilmor Tri-Tube Bender for up to 180 Degree Bends, 1/4", 5/16", 3/8"

  • TRI-TUBE BENDER: Indicators in the handles help you correctly identify the tube size for simple sizing.
  • EASY TO USE: Align the tool with its color-coded indicators for convenient use that saves you time.
  • CONVENIENT MEASURMENT MARKINGS: Markings on the side help measure the bend radius so you can achieve a perfect bend of up to 180 degrees.
  • DURABLE: With its heavy duty construction, this tool provides a durable, long-lasting design.
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

Mophorn Pipe Tube Bender 3/8 to 1 Manual Tube Bender with 7 Dies Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • 3/8"-1" Bending Range: The bender can easily and smoothly bend less than 0.08 inch/2 mm thickness iron pipe. And the tool is suitable for....
  • 7 Superior Steel Dies: We provide 7 tube bender dies, size ranging 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1". The bending formers can meet different....
  • Carbon Steel Material: Made of strong steel material, our bending tool performs well in bending hard materials. High strength steel aims for a long....
  • Compact & Portable Design: Compact design allows easy carrying, lightweight but gives enough bending force. The metal bender adopts a long handle with....
  • Universal Usage: A multifunctional steel bender machine is suitable for grids, gates, balcony railing, patio furniture, and steel materials. Widely....
Check Stock

ICOOL Tube Bender 3 in 1 Manual Tubing Bending Tools 0-180 Degrees 1/4 5/16 and 3/8 Inch for Copper Aluminum Brass and Thin Stainless Steel Pipes

  • 【3 in 1 Capacity】According to the angle you require from 0-180 degrees, this pipe bender is a 3 in 1 tool and will fit 1/4, 5/16, 3/8 inches (6,....
  • 【Sturdy Tool】High visibility markings 0-180 degrees design can avoid denting and collapsing your tubes. Quality machined aluminum alloy is for....
  • 【Ergonomic Frame Design】Ergonomic wide hook grips, equipped with non-slip long knurled grip handles, help bender pipes quickly, effectively and....
  • 【Versatile Tools】This tube bender with high-quality, heavy duty steel will efficiently bend copper, brass, aluminum and thin stainless steel pipes....
  • 【Easy To Operate】The manual pipe bender, made with high precision and premium machining quality, is portable and easy to operate with user manual..
Check Stock

ICOOL Tube Bender 3 in 1 Manual Tubing Bending Tools 0-180 Degrees 1/4 5/16 and 3/8 Inch Matte Surface for Copper Aluminum Brass and Thin Stainless Steel Pipes

  • 【3 in 1 Capacity】According to the angle you require from 0-180 degrees, this pipe bender is a 3 in 1 tool and will fit 1/4, 5/16, 3/8 inches (6,....
  • 【Sturdy Tool】High visibility markings 0-180 degrees design can avoid denting and collapsing your tubes. Quality machined aluminum alloy is for....
  • 【Ergonomic Frame Design】Ergonomic wide hook grips, equipped with non-slip long knurled grip handles, help bender pipes quickly, effectively and....
  • 【Versatile Tools】This tube bender with high-quality, heavy duty steel will efficiently bend copper, brass, aluminum and thin stainless steel pipes....
  • 【Easy To Operate】The manual pipe bender, made with high precision and premium machining quality, is portable and easy to operate with user manual..
Check Stock