ReviewsI2c Interface

Geniatech XPI-3288 Android Single Board Computer Development Board Moudle,Rockchip RK3288 Quad Core CPU 2G RAM, 16GB EMMC Flash Motherboard

  • Card-sized High Performance Board, Rockchip RK3288 with Quad-core Cortex-A17 up to 1.6GHz, 2G RAM, 16GB eMMc flash, faster read / write speeds for the OS, applications and file storage.
  • 4*USB2.0, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 1000M LAN interface, Micro SD card (TF card : Max64G).
  • Multiple DIY use Single Board Computer, use the Form Factor of Raspberry Pi, DIY Friendly Design: 40 Pin GPIO header with I2S, I2C, SPI, UART, etc.
  • According to the definition of Raspberry Pi, which is suitable for the field of programming education for teenagers.
  • Compatibility and Extensibility: 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, SPI, UART, and so on.
Check Stock

HiLetgo 2pcs Gamepad Joystick Shield for Arduino Expansion Board Analog Keyboard and Mouse Function

  • The "Nokia 5110 LCD" interface has been added.
  • The bluetooth module interface has been added, Convenient Bluetooth wireless serial communication..
  • The "I2C" communication interface has been added Compatible with Arduino UNO.
Check Stock

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi

  • High quality 2004 LCD screen with IIC i2c Adapter, Displays 4-lines X 20-characters..
  • Backlight control, you can control by jumpers, can also be controlled by the program..
  • IIC/I2C interface was developed to reduce the IO port usage on Arduino board..
  • Adjustable contrast, the backlight control to provide library..
  • 5V power supply, the device address will be 0x27 or 0x3F at Random..
Check Stock

16x2 Blue LCD Module Controller HD44780 Based for Arduino by Corpco

  • Size: 1.54in screen can provide clear view for you..
  • Drive Voltage: 3.3V-5V. The pin has good contact performance, ensure stable working.
  • Material: Adopted of high quality electronic components, and preciseness process, ensure for the durability.
  • Resolution: 128 x 64. Great workmanship, easy and convenient to install. Driver IC: SSD1309, compatible with SSD1306. Interface: SPI interface I2C interface.
  • Optional Style: Display White, Display Yellow, Display Blue. Available in three colors for your choice..
Check Stock

LCDOLED Replacement 14.0 inches FullHD 1920x1080 IPS LCD Display Touch Screen Digitizer Assembly with Board for Acer Spin 3 SP314-53N-77AJ SP314-53N-57BS (No Bezel)

  • 1. * Warning: Acer Spin 3 SP314-53 is equipped with 2 different types of touch screens: I2C and USB types. * Please check the touch type of your laptop from Computer Management(Local)>.
  • if ONLY one “I2C HID Device” = USB Type /// if two “I2C HID Devices” = I2C Type Please refer to the product image4 and confirm the type of your touch screen, then leave us a message with the type of your touch screen and the specific model of your laptop after your payment..
  • 2. Compatible Model: for Acer Spin 3 SP314-53N-77AJ SP314-53N-57BS；LCD Model: B140HAN04.0 or compatible；Size: 14.0 inches ；LCD Connector: EDP 30Pins；Resolution: 1920×1080 -IPS；Backlight: LED LCD；Warranty: 3 months.
  • 3. Package includes the LCD screen + touch digitizer assembly + touch controller board ONLY. No extra bezel, touch controller board, LCD cable, back cover, hinges, instruction or tools , etc. Please keep your original parts..
  • 4. The item is only available for the laptop with touch function. It will be well tested and packed before shipping. 3 months warranty provided against quality problem..
  • 5. Please kindly check your model and resolution again before you purchase. If you are not sure whe....
Check Stock

HiLetgo 0.96\ SSD1306 I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color Yellow Blue

  • Works well SSD1306 library, a nice OLED for Arduino, Beaglebones, Raspberry Pi.
  • Simple 4-wire I/F makes it a snap to use, easy to get up and running.
  • Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight.
  • There are other I2C IIC(4Pin) and SPI (7 Pin) interfaces and two different Font Colors for your option.
Check Stock

GY-521 MPU-6050 MPU6050 Module, 3 Axis Accelerometer 6 DOF Gyroscope Sensor Module Kit 16 Bit Converter Data Output IIC 3-5v Compatible with Arduino (10 Pieces)

  • GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensors.
  • Parameter range: the MPU-6050's angular velocity range is ±250, ±500, ±1000 and ±2000°/sec (dps) for accurate fast and slow motion, and user-programmable accelerator full-frame sensing the range is ±2g, ±4g±8g and ±16g.
  • Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
  • Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
  • Easy to use: the measured values of the sensor can be interrogated by the I2C interface.
  • The accelerometer can be operated at both 3.3V and 5V.
  • Compatible with Arduino and Raspberry Pi.
  • Universal usable: the sensor can be applied to develop various entertaining applications and systems.
  • Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots.
Check Stock

SEEU. AGAIN 4pcs 0.96 Inch I2C OLED Display Module IIC SSD1306 128x64 LCD White with 4 Pin Female to Female Du-pont Wire

  • I2C mode up to 400Khz, configurable slave address.
  • Two pin 3.3V UART mode, baud rates {9600, 19200, 38400, 57600, 115200}.
  • 4-pin SPI mode, supports all 4 standard SPI modes, up to 3Mhz clock.
  • Backlight brightness and contrast controlled by software commands.
  • Source code examples for custom applications, showing how to interface with the LCD from any I2C/UART/SPI hardware.
Check Stock

MakerFocus Lidar Range Finder Sensor Module TF-Luna, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Rasppbarry Pi with UART / I2C Communication Interface

  • English product manual: Get the link in the product guide and document. Note: TF-Luna module comes with UART and I2C interface, the default is UART, if you need to use I2C interface, please set it yourself..
  • TF-Luna: TF-Luna is a single-point ranging LiDAR, based on TOF principle. With unique optical and electrical design, it can achieve stable, accurate and highly sensitive range measurement..
  • Product Characteristics: The product is built with algorithms adapted to various application environments and adopts multiple adjustable configurations and parameters so as to offer excellent distance measurement performances in complex application fields and scenarios..
  • Extreme Cost Performance: Low-cost ranging LiDAR module, with 0.2-8m operating range. TF-Luna has a highly stable, accurate, sensitive range detection..
  • Slim Figure Yet Big Skill: The product is built with algorithms adapted to various application environments and adopts multiple adjustable configurations and parameters so as to offer excellent distance measurement performances in complex application fields and scenarios..
Check Stock

Songhe 5MM LDR Photosensitive Sensor Module Light Dependent Resistor Sensor Module Digital Light Detection LM393 3 pins for Arduino (10PCS)

  • The BH1750FVI sensor to measure the ambient light level. BH1750FVI is a calibrated digital light sensor IC that measures the intensity of incident light and converts it to a 16-bit digital number..
  • It can measure the ambient light intensity ranging from 0 to 65535 lux (L). Lux is an SI unit for illuminance and is equal to one lumen per square meter. The BH1750FVI sensor directly gives the output in Lux..
  • The sensor's spectral response function is approximately similar to that of the human eye. The sensor output can be accessed via an I2C interface. The 7-bit I2C address is 0 × 23 if the ADDR pin is grounded, or if the 0x5C ADDR is bound to VCC..
Check Stock