ReviewsIct Billet Ls

Motion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block

  • This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted LS engine..
  • The design allows the block to be mounted universally or off the upper two most holes on LS1 cylinder heads front or rear as well as on a firewall, or anywhere else. This manifold is CNC machined from 6061 aluminum and features 8 separate 1/8 NPT ports and 2 1/4" NPT ports (on each end) giving you many different options for line routing and enough spaces for all of your boost reference signals.
  • This works great for plumbing to your boost reference fuel pressure regulator, manifold pressure wastegates, blow off valve, map sensor, boost controller sensor and many other items. Comes with two stainless button head bolts with the correct length and thread to mount block to cylinder heads..
  • Comes complete with 4 1/8" port plugs and 1 1/4" port plug standard..
Check Stock

A-Team Performance - Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet - Compatible with GM 1997-Up LS1 LS Engines

  • Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet.
  • Compatible with GM 1997-Up LS1 LS Engines.
  • Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
  • Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
  • Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
Check Stock

RULLINE Motor Mount Adapter Plate SBC Vehicle to LS Engine Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet

  • 【LS Conversion】 These LS swap motor mounts will allow you to swap a 1997-2013 LSX style engine into any Chevy application that originally used 3....
  • 【LS Swap】—— The Chevy LS engine swaps into MOST 60's and 70's Chevy pickups and cars such as Camaro, Nova, Chevelle, and Impala among others.
  • 【4 Adjustable Positions】The ls motor mount kit Machined 6061 billet aluminum,Designed to allow four positions in order to accommodate the widest....
  • 【Premium Quality】——Made of CNC Aluminum Alloy Material, they are precision-cut to provide a secure fit to the block and motor mount,These ls....
  • 【Include】2 pcs ls motor mount adapter, 8 flat head bolts, and 6 flange M10-1.5 bolts..
Check Stock

BLACKHORSE-RACING LS Billet Aluminum Oil Diverter Barbell & Oil Bypass Valve Plug & Oil Pickup Tube Hold Down Kit Compatible with GM Gen III & IV LS Engines

  • ★A 1/4-20 threaded hole in the end of the Barbell for easy removal. No more digging and prying.
  • ★Material：CNC Billet 7075 billet aluminum material for long lasting durability.
  • ★Easy to install: use the existing extra hole on the oil pump.To be sure your oil tube sits flush on the oil pump so the O-ring can do its job,....
  • ★Fitment: LS1-2-3-6-7-9-LQ4-LQ9-4.8L-5.3L-6.0L-6.2L L92 LS4 L99 LSA and more.
  • ★Package Includes:1x Oil Diverter Barbel,1xOil Bypass Valve Plug ,1x Oil Tube Hold Down,Includes High Strength 10.9 Bolt,As the picture shown.
Check Stock

ICT Billet LSA Supercharger High Mount A/C Compressor Bracket Kit Compatible with GM R4 CTS-V ZL1 6-Rib Heavy Duty Billet Aluminum Universal Air Conditioner Truck Spacing LS3 LM7 LS 551135-3-R4

  • Install your A/C compressor up on the passenger side.
  • Compatible with LS engines with Truck/SUV (or L99/LS3 Camaro) crank pulley and LSA supercharger – ZL1 Camaro or CTS-V.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Includes: Heavy duty belt tensioner, A/C compressor brackets, idler pulleys, and mounting hardware.
  • Compatible with GM R4 AND LS Truck Gen 3 & 4, LS3 Camaro, and LS1 Camaro(truck spacing) water pumps.
Check Stock

Extreme Dog Fence Replacement Containment and Training Collar Strap for Most Dog Fence Brands (Medium: 13' - 18' x 3/4', Flower Days)

  • INVISIBLE FENCE COMPATIBLE - This Collar Will Work with Invisible Fence Brand Inground Fences Prior to the 800 Series, Including ICT-700, ICT-725, ICT-750, ICT-775, ICT-150, ICT-250, ICT-100, ICT-75, ICT-50, AT-950 Indoor Transmitter, CT-4000.
  • NOT COMPATIBLE - These Collars Will NOT Work with Invisible Fence 800 Series Systems or Later Fence (Including the Titanium Series). . Will NOT work with Boundaries Plus Fence. Nor Will They Work With the Shields Indoor Avoidance Transmitters.
  • FREQUENCY SELECTION - Most Invisible Fence Brand Underground Fence Systems Run on 7K, by Default. Systems that were Setup with Neighboring Fence Systems in Place May Run on 10K, to Avoid Interference.
  • AMERICAN MANUFACTURED - This Collar is Proudly Manufactured Right Here in the U.S.A. with a History of Dependability Behind it.
  • Each Pet Fence Collar Order Comes with a Free eXtreme Dog Fence Backup Collar Strap.
Check Stock

FAST LSXr 102mm LS1/2/6 Intake Manifold + 102mm Big Mouth Billet Throttle Body Kit

  • Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with....
  • Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow....
  • The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency.....
  • Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar....
Check Stock

Z Whip LS Oil Pump Pickup Tube Girdle Pipe Hold Down Brace Support Billet Bracket MADE IN THE USA Compatible with GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L

  • Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy).
  • The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place..
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes)..
  • Proudly made in the USA from Aerospace Grade Billet Aluminum.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Check Stock

ICT Billet LSA LS9 LT4 Supercharger MAP Vacuum Port Cap Plug Plate LS SC Blower ICT 551383

  • Compatible with LSA, LS9, and LT4 superchargers.
  • Can be used to plug 1 or both MAP sensor port locations.
  • Billet plug securely seals MAP sensor bores.
  • Includes: 1 plug, with FKM oring, and USA made bolt.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
Check Stock

LKONWEE Billet Aluminum Oil Diverter Barbell Oil Restrictor Galley Plug Fits GM Gen III & IV LS Engines LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 4.8L 5.3L 6.0L 6.2L

  • Compatible with all GM LS Series Engines inclued LS1 LS2 LS3 LS6 LS7 LS9 LQ4 LQ9 4.8L 5.3L 6.0L 6.2L LM7 LR4 L59 LM4 L33 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG L98 L9H L20 L94 LZ1 L99 L96 LC8 L77.
  • Compatible with GM Gen III & IV Engines..
  • Directly to replace the factory plastic barbell，machining have less tolerance, makes the gap smaller,makes the gap smaller, so that it can prevent dust from entering oil and keep it clean..
  • It was designed with a little taper, which will makes oil flow smoothly,can effectively prevent the loss of engine oil, increasing the use of flow..
  • Made of quality billet aluminum material. 1/4-20 threaded hole aids in easy removal..
  • When using the barbell, please wipe the using part cleanly and Lube the Oring. Then insert the barbell and screw it in with firm pressure..
Check Stock

4AN Turbo Oil Feed Restrictor Fitting For GT25 GT25R GT28 GT28R GT35 GT35R T25 Turbocharger Ball Bearing Turbo Oil Feed 1MM M12 x1.25 Thread

  • Fits GM Gen III & IV LS Engines LS1-2-3-6-7-9-LQ4-LQ9-4.8L-5.3L-6.0L-6.2L & More! SAME BUSINESS DAY SHIPPING!.
  • BEWARE OF COPYCAT COMPANIES! COMPARE THEIR INFERIOR MACHINE WORK AND CHEAP MATERIAL TO OURS! SCCITYCORVETTE IS THE ORIGINAL INVENTOR OF THE PRECISION LS BILLET BARBELL, BYPASS DELETe & GALLERY PLUG! TO KEEP UNFILTERED OIL FROM GETTING INTO THE BEARINGS AND LIFTERS, WE KEEP EXACT TOLERANCES THAT COST MORE TO MANUFACTURE. NOT HOLDING EXACT TOLERANCES DEFEATS THE PURPOSE OF KEEPING UNFILTERED OIL OUT. COPYCAT COMPANIES DO NOT HOLD OUR TOLERANCES, THAT’S WHY THEY ARE SO CHEAP!.
  • The factory plastic barbell is approximately .020” to loose so particles as big as 500 Microns can leak passed the factory Barbell. When oil leaks pass the Barbell it goes unfiltered directly to the Cam Bearing, Lifters, Crank and Rod Bearings. Your oil filter will filter out approximately 25 Microns depending on the brand of filter. Our Aluminum Precision Billet Barbell fits with approximately .001” clearance which will let only about 20-25 Microns pass by, that is the same as the filter..
  • Our New Tapered Design and 30% smaller shaft greatly increaseoil flow!.
  • We have also added a 1/4-20 threaded hole in the end of our Barbell for easy removal. Just screw a 1/4-20....
Check Stock