ReviewsIde Harddrive

ZRM&E 2pcs 4Pin IDE PSU Power Splitter Cable D Type Large 4P Molex 1 Male to 3 Female Multiplier PC Fan Extension Cable

Type: 1 to 3 D Type Large 4Pin IDE 1 Male Port to 3 Female Port PSU Power Splitter Extension Cable.
Interface Port: One side is large 4 Pin IDE male connector, and the other 3 sides are large 4 Pin IDE female connector. 1 to 3 Multiplier PC Fan Extension Cable..
Function: Use to add extra power outlets to your power supply for connecting IDE PC fan..
Application: Standard 4 Pin Power Connectors for Hard disk, Cooling fan, CDROM, DVD-ROM etc. suitable for adding more cooling fan, CDROM Drive..
Package Content: 2 x Molex Extension Cable 4 Pin 1 Male to 3 Female IDE PSU Internal PC Power Splitter.

Check Stock

Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5 /3.5 HDD/SSD with 12V/2A Power Supply SA03001

Universal USB to SATA/IDE Adapter: Supports 2.5"/3.5" SATA HDD and SSD, 2.5"/3.5" IDE HDD, SATA DVD-ROM, CD-RW, DVD-RW, DVD+RW Optical Drive,two IDE....
Works with up to 3 HDDs: This USB 3.0 to IDE and SATA adapter is equipped with a SATA III connector and 2 IDE connectors (one 2.5" and one 3.5"). It....
High Speed Transfer: Data transfer speed reaches up to 5Gbps. Backward compatible with USB 2.0/1.1..
Support Systems: Windows 11/XP/Vista/7/8/10(32bit and 64bit).
on/off switch for HDD protection. Led light shows power and activity status..

Check Stock

Alxum USB 3.0 to IDE SATA Converter Hard Drive Reader for Universal 2.5/3.5 IDE Hard Drive & SATA HDD SSD Support One Touch Backup and Max 18TB with 12V 2A Power Adapter & USB A Cable 80cm

Alxum SATA IDE to USB Adapter can connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with....
Unique One-Touch Backup (OTB) Function. Allow you realize data back via one-touch operation. Easy transfer data between three hard drives. Plug and....
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downward compatible with USB 2.0 (high-speed 480 Mbps) / USB 1.1 (full-speed 12 Mbps)....
Alxum SATA and IDE Hard Drive Dock support 2 IDE hard drive and 1 SATA hard drive connecting simultaneously, compatible with two IDE hard drives....
Broad Compatibility of Operate Systems: Support Windows XP/Vista/7/ 8/8.1/10, Mac OS 10 or higher, Linux. We offer: SATA/IDE Hard Drive Cable, 12V 2A....

Check Stock

Aiyide 2 Pack Computer Molex 4 Pin Power Supply Y Splitter Cable - 2 Female to 1 Male Internal Power Extension Cable

Quality Connectors: 4-Pin IDE to 2 x IDE.
Use to add extra power outlets to your power supply for connecting IDE hard drives and IDE CD Rom/DVDRW drives Length: 20 cm Premium.
2 Pack Computer Molex 4 Pin Power Supply Y Splitter Cable - 2 Female to 1 Male Internal Power Extension Cable.

Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.

Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....

Check Stock

CERRXIAN SATA Female to 40 pin Male 3.5 inch IDE Adapter for PC to SATA Hard Drive Interface Adapter

One Female SATA 7+15pin port, one 3.5Male PATA port (40-pin IDE), and one 4-pin Molex power connection Adapter.
SATA Female to 40 pin Male 3.5 inch IDE Adapter allows you convert hard drive interfaces to work with newer/older systems..
Converts Parallel ATA(PATA, ATA, IDE) to Serial ATA (SATA) Converts SATA to PATA/ATA/IDE/EIDE..
Package: Sata to Pata Interface Adapter x1..

Check Stock

Cablecc IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5' Hard Disk Drive

3.5 inch IDE 40Pin HDD Drive to SATA converter Board Works with all IDE 40Pin Drives up to 1000GB.
Supports IDE 66/100/133MB/s No need for an extra power supply..
No driver needed, plug and play, unit is not hot swappable..
Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..

Check Stock

160 GB 160G 5400 RPM 2.5' IDE PATA WD1600BEVE for Laptop Hard Disk Drive

Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.

Check Stock

Cablecc IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5' Hard Disk Drive cablecc

You need to set your IDE 3.5" disk to master mode..
Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Windows 8 & Windows 10& Linux..
No need for an extra power supply. No driver needed, plug and play, unit is not hot swappable..
Works with all IDE 40Pin Drives up to 1000GB , Supports IDE 66/100/133MB/s.

Check Stock

CY SATA Female to IDE 44Pin Disk Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

Works with all IDE 44Pin Drives up to 500GB.
Be good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD or SSD.
No need for an extra power supply. No driver needed,....
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) . 2.5 inch IDE 44Pin SSD or HDD Drive to SATA Female Converter Board PCBA.

Check Stock