ReviewsIde To Usb Connector

ZRM&E 2pcs 4Pin IDE PSU Power Splitter Cable D Type Large 4P Molex 1 Male to 3 Female Multiplier PC Fan Extension Cable

Type: 1 to 3 D Type Large 4Pin IDE 1 Male Port to 3 Female Port PSU Power Splitter Extension Cable.
Interface Port: One side is large 4 Pin IDE male connector, and the other 3 sides are large 4 Pin IDE female connector. 1 to 3 Multiplier PC Fan Extension Cable..
Function: Use to add extra power outlets to your power supply for connecting IDE PC fan..
Application: Standard 4 Pin Power Connectors for Hard disk, Cooling fan, CDROM, DVD-ROM etc. suitable for adding more cooling fan, CDROM Drive..
Package Content: 2 x Molex Extension Cable 4 Pin 1 Male to 3 Female IDE PSU Internal PC Power Splitter.

Check Stock

StarTech.com 2.5 IDE Hard Drive Enclosure - Supports UASP - Aluminum - IDE and SATA - USB 3.0 HDD Enclosure - External Drive

Turn a 2.5” SATA III or IDE HDD / SSD into an external hard drive that connects to your computer through USB 3.0 with UASP.
Works with USB 3.0 computers such as Ultrabooks, Macbooks and desktop computers and 2.5in IDE or SATA HDDs & SSDs such as Samsung 840 EVO.
2.5" hard drive enclosure / SATA 2.5 hard drive enclosure.
IDE HDD or SSD enclosure / USB to IDE enclosure / 2.5 inch enclosure.
Turn an unused IDE or SATA drive into additional external storage.

Check Stock

ACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328

for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.

Check Stock

SDTC Tech 3pcs SATA Male to 4pin Molex Female Power Adapter Cable Serial ATA Extension Cable for 3.5 inches HDD/SSD/SD ROM (20cm)

SATA to IDE Molex Power Adapter Cable, used to convert 15pin SATA male to 4pin Molex female for connection to legacy optical drives..
Connector: 15pin Male Serial ATA Hard Drive Connector and 4pin IDE/ATAPI Molex Female Power Connector..
Connection Line: 18AWG, copper, about 20cm length..
Application: Suitable for looking to plug additional SATA drives, such as 3.5 inches SATA Hard Disk and CD-ROM/DVD-ROM etc..
Package Include: 3pcs SATA 15 Pin Male to IDE Molex 4 Pin Female Power Adapter Cable..

Check Stock

Alxum USB 3.0 to IDE SATA Converter Hard Drive Reader for Universal 2.5/3.5 IDE Hard Drive & SATA HDD SSD Support One Touch Backup and Max 18TB with 12V 2A Power Adapter & USB A Cable 80cm

Alxum SATA IDE to USB Adapter can connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with....
Unique One-Touch Backup (OTB) Function. Allow you realize data back via one-touch operation. Easy transfer data between three hard drives. Plug and....
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downward compatible with USB 2.0 (high-speed 480 Mbps) / USB 1.1 (full-speed 12 Mbps)....
Alxum SATA and IDE Hard Drive Dock support 2 IDE hard drive and 1 SATA hard drive connecting simultaneously, compatible with two IDE hard drives....
Broad Compatibility of Operate Systems: Support Windows XP/Vista/7/ 8/8.1/10, Mac OS 10 or higher, Linux. We offer: SATA/IDE Hard Drive Cable, 12V 2A....

Check Stock

LWS 2.5 Inch IDE to SATA Adapter Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port 。

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

Check Stock

160 GB 160G 5400 RPM 2.5' IDE PATA WD1600BEVE for Laptop Hard Disk Drive

Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.

Check Stock

AITRIP 5 PCS Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header Compatible with arduino Leonardo Replace ATmega328 Pro Mini (5PCS)

On-Board Micro-USB connector for programming.
Pay attention to : 1.When you open the for Arduino IDE software, could you please go to the tool and choose the board "for Arduino Leonardo".
2: The acceptable voltage range is 6 to 9 V..

Check Stock

CERRXIAN SCSI HPDB 68 Pin Female to IDE 50 Pin Female Adapter Converter

Designed to convert an HPDB 68pin connection into an IDE 50pin connection for hard driver..
Note: This is a 50-pin IDE, not a 40-pin or 44-pin IDE, and it cannot be used in ordinary computers. It can only be used on industrial server IDE 50-pin interface motherboards..
Use this adapter to connect old HDD or others old devices with scsi interfaces to newer tape drives or other devices..
The IDE connector seat uses a high-thickness gold-plated layer, which is more conductive and more stable..
Suitable for disks, tapes, CD-ROMs, rewritable optical drives, printers, scanners and communication equipment, etc..

Check Stock

StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5'/3.5' HDDs/SSDs with UASP (UNIDOCKU33), Black

EASY TO USE: The external hard drive docking station enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots..
ENHANCED WITH UASP: This USB 3.0 universal HDD / SSD dock increases performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller..
SMART DESIGN: This USB 3.0 universal docking station has a single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously..
INCREASED PERFORMANCE: The dual hard drive docking station can be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives..
Connect both an IDE and a SATA 2.5 & 3.5in HDD or SSD to your computer using USB 3.0, with support for UASP for optimal performance.
works with USB desktop & laptop computers and SATA & IDE drives such as Samsung 840 EVO.
hard drive dock / HDD & SSD docking station / hard drive dock / SSD dock / HDD dock.
Test or benchmark virtually any hard drive or solid state drive.
Transfer files directly between SATA and IDE drives without a host computer.

Check Stock

SD to IDE Adapter Small Memory Card to IDE Small Memory / TF Card to IDE 44Pin Male Adapter

...ory card specification Ver2.0, IDE/ATA?33 specification. Products that meet the specifications are very suitable for your use..
STANDARD IDE INTERFACE£º44Pin male adapter hard disk adapter adopts standard IDE interface, true IDE mode, and supports DMA-33 transmission mode. The IDE interface is a 44-pin/2.0 mm male connector. This product is convenient for you to use..
TWO MAIN CONTROL CHIPS£ºThere are two main control chips on this board, and there is a memory card socket on the back. Advantages: small footprint, compact design and simple operation..
SYSTEM SUPPORTABLE£ºThe memory card can be included with the OS and application software, and the device can be directly activated.
Supporting DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems..
SPECIALLY DESIGNED£ºSmall memory card to IDE memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, and permanent and effective data storage..

Check Stock