ReviewsIde To Usb For Linux

AiTrip 5pcs Digispark Kickstarter Attiny85 General Micro USB Development Board for Arduino

Support for the . IDE 1.0+ (OSX/Win/Linux)..
Power via USB or External Source - 5v or 7-35v (automatic selection)..
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)..

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector..
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

...g the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Power LED indicator and Test / Status LED (in Pin0).

Support for Arduino IDE 1.0+ and OSX/Win/Linux.
Power via USB or External Source - 5v or 7-35v (automatic selection)..
I2C and SPI (vis USI),PWM on 3 pins (more possible with Software PWM),ADC on 4 pins.
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).

◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..

...d socket on the back. Advantages: small footprint, compact design and simple operation..
SYSTEM SUPPORTABLE£ºThe memory card can be included with the OS and application software, and the device can be directly activated.
Supporting DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems..
SPECIALLY DESIGNED£ºSmall memory card to IDE memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable performance, and permanent and effective data storage..

SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive 2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
Works with all SATA Drives up to 500GB Supports IDE 66/100/133MB/s.
No need for an extra power supply. 44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play,....
Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Adapter is good for up grading an old....
Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..

3.5 inch IDE 40Pin HDD Drive to SATA converter Board Works with all IDE 40Pin Drives up to 1000GB.
Supports IDE 66/100/133MB/s No need for an extra power supply..
No driver needed, plug and play, unit is not hot swappable..
Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..

USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your SATA / IDE device to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
USB 2.0 to IDE/SATA Cable can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Also, it is easy to use and plug & play, no drivers needed..
Satisfaction Guarantee: We always want to offer striving hard to provide our customers with best shopping experience. If you are not satisfied for any reason, please do not hesitate to contact us. We will offer you a satisfactory solution. Thank you!.