ReviewsIdlers Rollers Shafts

Globauto Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft Cr12

  • This kit includes an additional 10 dies to use with any bead roller with a 7/8 inch (22mm) shaft..
  • With these additional dies on your bead roller you can create hemmed edges, offset flanges, contours, deep channels, and style lines..
  • Material = CR12 Steel , Hardness = 35~45HRC.
  • This kit also includes a polyurethane lower "skate board" wheel, which can be used with a variety of upper dies..
Check Stock

Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft CR12 not chrome plated not peel

  • Includes 9 steel dies and 1 polyurethane lower wheel.
  • Material = CR12 Steel , Hardness = 35~45HRC.
  • Hem edges, create offsets and flanges, form style lines, contours and channels.
  • Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Check Stock

PZRT 2 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers

  • Bearing material: high temperature bearing steel, with wear resistance, heat resistance and durability..
  • Size: Aperture=19.05mm/3/4", Outer diameter=31.75mm/1-1/4"..
  • Feature: needle roller thrust bearings can accommodate axial loads in one direction only..
  • Function: These rollers are used to reduce friction of a rotating surface. It can serve as raceways in the faces of adjacent machine components..
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

  • The needle roller thrust bearing can only bear axial load in one direction.
  • Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
  • Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
  • The hardened chromium steel roller has heat resistance and durability under heavy load.
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

HIC 22310 Spherical Roller Bearing, 22310RW33FY HIC Roller Bearing, 50MM Straight Bore, 110MM Outside Diameter

  • Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
  • Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

303373K Roller Wheel Drum Support Kit for Maytag & Admiral Dryers by PartsBroz - Replaces Part Numbers 12001541, AP4008534, 12001541VP, 3-3373, 303373, DE693, PS1570070, Y303373 (Pack of 2)

  • ...ins. When a bearing goes bad on a roller, it can damage the shaft and cause an unpleasant squeaky or rumbling noise. Disassemble your dryer to determine how many have gone bad and need replaced. This complete kit gives you everything you need to replace two drum supports..
  • ✅ DIY REPAIR: Replacing two drum support rollers and shafts by yourself takes one to two hours depending on your experience. Following along with a video online makes the process easy. You’ll just need a 5/16 nut driver, Phillips screwdriver, a 9/16 wrench, and snap ring pliers and/or a small flathead screwdriver..
  • ✅ HIGH-QUALITY KIT: The kit includes two drum supports, two shafts, two fiber washers, two nuts, two C clips, and two spring washers. Both drum supports feature a thick plastic construction with a reinforced metal shaft for added durability..
Check Stock

MMC77 Copper Base Anti-Seize Lubricant Compound 2100°F (8oz)

  • BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
  • Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
  • Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
  • Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
  • Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.
Check Stock

ETIASQSA Folding Barn Sliding Door Hardware 79\-6.6FT Track Kit, Unique Design Saves Space, Heavy Duty Side Mounted Black Roller for 2 Folding Doors

  • Absolute advantage: Compared to other hardware door hardware on the market, this requires a shorter track, which is very space-saving. For folding doors, the length of the track is approximately the same as the width of the door.
  • The package includes: splicing guide rails, two pairs of rollers, two door bottom rotating shafts, 6 door connecting hinges, and all accessories in the picture, instruction so on. Don't include the door..
Check Stock

Lamanator Plus Deep Scrub - 1 Quart

  • HIGH QUALITY – Whether used for handouts, posters, bus tags or teaching aids, you can get clear results for all of your projects. A wide 27″ laminating width is perfect for schools with versatile laminating needs..
  • AUTOSPEED – Laminating machine warms up in less than 10 minutes and has a one-touch AutoSpeed feature. AutoSpeed selects the optimal speed for your documents, which helps ensure quality lamination, every time..
  • EZ LOAD COMPATIBLE – Compatible with 25″ or 27″ EZ Load Gray Cap NAP I Film and standard 1″ core NAP I film up to 3 mil. EZ Load color coded end caps show the right way to load film, helping you avoid costly service calls..
  • STANDARD FILM COMPATIBLE – Make film loading simple. A pivoting table provides quick access to the rollers, while AutoGrip shafts make removing and adding standard film easier than ever. All film sold separately..
  • FILM SAVING – Reduce film waste. Features front and back stop buttons to easily pause lamination for loading or cutting, while a footage counter tracks the film remaining for your use..
Check Stock

Mecanum Wheel with Coupling 4PCS Omnidirectional Wheels 4WD Smart Robot Car Kit Accessories 65mm Robot Kit Drive Wheel for Arduino/Raspberry Pi DIY STEM Project

  • 003cp003e65mm engineering plastic mecanum wheels (2x left, 2x right) include 2 right wheels and 2 left wheels. Each wheel consists of 9 rollers and 003cb003ecan be driven independently.003c/b003e003c/p003e.
  • 003cp003eMecanum wheels can be moved 003cb003ein any direction without changing the direction003c/b003e of rotation of the wheels. Each of the four mecanum wheels contains a series of rollers whose axis of rotation makes a 45 ° angle to the plane of the wheel.003c/p003e.
  • 003cp003eThe mecanum wheels suitable for 003cb003eLego 003c/b003ecross shafts, can also be fitted with N20 motors by installing 3mm couplings, TT motors by installing TT motor couplings, GA25-370 by installing 4mm couplings, and 5mm couplings by installing with stepper motor.003c/p003e.
  • 003cp003eThis mecanum wheels used for 003cb003eRaspberry Pi 4/3B+/3003c/b003e,Micro:bit and 003cb003eArduino Project 003c/b003ecompatible with DC motor.003c/p003e.
  • 003cp003eThe mecanum wheel made of high hardness plastic,and 003cb003elow pulsating noise003c/b003e. Omnidirectional Wheels are not easy to damage. The mecanum wheels have a long service life and no deformation.003c/p003e.
Check Stock

LEXUS OEM FACTORY TIMING BELT KIT 2003-2009 GX470

  • WATER PUMP , TIMING BELT , TENSIONER , DRIVE BELT , x2 IDLERS.
Check Stock