ReviewsImpeller Shaft

WINGOGO 67F-44352-00-00 Water Pump Impeller Replacement for Yamaha Outboard 75 80 90 100 HP 4 Stroke Boat Motor Engine parts replace 18-3042 67F-44352-01 67F-44352-00 67F-44352-01-00

  • This Water Pump Impeller fits Yamaha Outboard Motor OEM P/N:67F-44352-01, 67F-44352-01-00, 67F-44352-00, 67F-44352-00-00 Sierra 18-3042. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Yamaha Outboard 75 80 90 100 HP F75 F80 Jet Drive F90 F100 Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water Pump Impeller Dimensions : Internal / Insert / Hub / Shaft Size: 0.787 inch, Depth / Height / Width/Thickness: 1.366 inch, Overall / Outer / External Diameter: 2.291 inch. Blades 6 as Pictures Showed, Please see the pictures..
  • Compatible with the outboards boat motor Sierra Marine 18-3042 Mallory Marine 9-45612 GLM 89624 SEI Marine 96-499-03M. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboar....
Check Stock

Summerwave Rotor PIN for Model SFX1000 X1000 Repair - Ceramic Shaft

  • Replacement Impeller Shaft Assembly for SFX1000, X1000 PUMP.
Check Stock

Tetra Pond Debris-Handling Pump, Energy Efficient, UL Listed, Up to 3,000 gallons

  • CONTINUOUS-OPERATION POND PUMP: For powering pond waterfalls and streams with rugged debris-handling impeller that can pass debris up to 1/4 inch in diameter..
  • CLOG-FREE PERFORMANCE: Large basket minimizes blockage and maintenance..
  • ENERGY EFFICIENT: Unidirectional impeller and motor..
  • WEAR-RESISTANT: Motor has anti-corrosive ceramic shaft for longer life..
  • THREE SIZES: For ponds up to 1,500 gallons, up to 3,000 gallons and up to 4,000 gallons..
Check Stock

USA Lab JR Series Receiving Flask - 10L, 20L, 50L, 100L - USAlab

  • Spinner flask has a 100mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm).
  • Borosilicate glass vessel with orange polypropylene 45GL threaded screw caps, with a polysulfone shaft and a Vortex Impeller paddle assembly.
  • Sidearm design permits easy access of 25 and 50mL pipets, while the side baffles enhance aeration and agitation of flask contents.
  • Reuseable, non-sterile flask has a patented 'stretch' impeller design that ensures optimal stirring.
Check Stock

Tetra Pond Debris-Handling Pump, Energy Efficient, UL Listed, Up to 4,000 gallons

  • CONTINUOUS-OPERATION POND PUMP: For powering pond waterfalls and streams with rugged debris-handling impeller that can pass debris up to 1/4 inch in diameter..
  • CLOG-FREE PERFORMANCE: Large basket minimizes blockage and maintenance..
  • ENERGY EFFICIENT: Unidirectional impeller and motor..
  • WEAR-RESISTANT: Motor has anti-corrosive ceramic shaft for longer life..
  • SIZED FOR YOUR POND: For ponds up to 4,000 gallons..
Check Stock

TCP Global Set of 2 Paint, Epoxy Resin, Mud and Cement Mixer Blades - Power Drill Stirring Tools - 15.5" & 14" Ribbon Mixing Paddles, 3/8" & 5/16" Hex Head Shafts - Mix 1 to 5 Gallon Bucket - Concrete

  • Combo Pack of 2 Different Sizes of Durable Power Mixer Blade Tools That Fit On 5/16" and 3/8" Sized Drills For Uniformly Mixing Paints, Epoxy Resins, Mud, Cement, Concrete Or Any Other Coating Or Powder Compounds That Have Low To High Viscosities..
  • Includes A 15.5" Long Steel Mixer Blade with A Nearly 3/8" Hex Head Steel Shaft and A 4" Impeller. It Also Contains A 14" Long Steel Mixer Blade with 5/16" (7.75mm) Hex Head Steel Shaft, and A 2.5" Impeller. The Hex Head Steel Shafts To Prevent The Blades From Slipping In A Drill..
  • The Durable Steel and Plastic Impellers Mix Materials Quickly and Evenly, As They Lift and Blend Materials From The Bottom of The Container. Mixers Are The Ideal Size For Stirring Coatings From 1-Quart Mixing Cups Up To 5-Gallon Cans, Buckets and Pails..
  • Each Mixer Includes A Plastic Head Cap On Top of The Shaft To Hang and Store Them Easily..
Check Stock

Jabsco 6050-0003 Marine Series Utility General Purpose Pump 110-Volt Nitrile Impeller Open Drip Proof Moto Non-CE 1 NPT Ports Bronze

  • 23 GPM (87 LPM) at 10’ (3m) of head, 1" NPT internal ports.
  • Bronze impeller body, JABSCO Nitrile Impeller for fresh and salt water as well as diesel, light oils, and antifreeze transfer.
  • Recommended for liquid temperatures between 50° to 180°F (10° to 83°C), Replaceable wearplate.
  • Lip type shaft seal, 3/4 HP open drip proof (ODP) motor, overload protected, 1725 RPM, 60 Hz, single phase.
  • 115/230 VAC, with 8 foot cord and plug (wired for 115VAC operation), 35-1/2 lbs. (approx.) (16.1 kg).
Check Stock

Corning 4504-15L Borosilicate Glass 15L Proculture Spinner Flask, with 140mm Shur-Loc Center Cap and 2 Angled Sidearms

  • Spinner flask has a 140mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm).
  • Borosilicate glass vessel has a Shur-Loc center screw cap and two 45GL orange polypropylene sidearm caps, with a polysulfone shaft and a Vortex Impeller paddle assembly.
  • Sidearm design permits easy access of 25 and 50mL pipets, while the side baffles enhance aeration and agitation of flask contents.
  • Reuseable, non-sterile flask has a patented 'stretch' impeller design that ensures optimal stirring.
Check Stock

Corning 4504-36L Borosilicate Glass 36L Proculture Spinner Flask, with 140mm Shur-Loc Center Cap and 2 Angled Sidearms

  • Spinner flask has a 140mm center neck and two 45 sidearms with 45mm outer neck diameters (inner diameter 29mm).
  • Borosilicate glass vessel has a Shur-Loc center screw cap and two 45GL orange polypropylene sidearm caps, with a polysulfone shaft and a Vortex Impeller paddle assembly.
  • Sidearm design permits easy access of 25 and 50mL pipets, while the side baffles enhance aeration and agitation of flask contents.
  • Reuseable, non-sterile flask has a patented 'stretch' impeller design that ensures optimal stirring.
Check Stock

Pneumatic Mixer, 50 Gallon Stainless Steel Automatic Paint Mixer Machine Ink Coating Mix Tool (US Shipping)

  • ...spark and anti-explosive. It is the best choice for open liquid drums. The mixer is easily clamped to the side of the bucket and the chucking angle can be adjusted. A good mixing effect can be achieved, and the forward steering gear can be attached to the mixer..
  • ❥PROMISE- We can provide the stainless steel active impeller, please send us a message if you want a set of active impeller instead of the fixed impeller you see..
  • ❥APPLICATION - Environmentally friendly pneumatic mixer products are widely used in food, aerospace manufacturing, shipbuilding, home appliances, painting, food industry, medical and other related industries..
Check Stock

Little Giant PE-2F-PW 115 Volt, 1/40 HP, 300 GPH Submersible Direct Drive Pump for Small Ponds or Fountains with 15-Ft. Cord, Black, 566611

  • CONTINUOUS-OPERATION POND PUMP: For powering pond waterfalls and streams with rugged debris-handling impeller that can pass debris up to 1/4 inch in diameter..
  • CLOG-FREE PERFORMANCE: Large basket minimizes blockage and maintenance..
  • ENERGY EFFICIENT: Unidirectional impeller and motor..
  • WEAR-RESISTANT: Motor has anti-corrosive ceramic shaft for longer life..
  • THREE SIZES: For ponds up to 1,500 gallons, up to 3,000 gallons and up to 4,000 gallons..
Check Stock