ReviewsImpregnated Diamond Core Bit

TOMMARS Diamond Drill Bits Set 5 Piece Diamond Hole Saw for Tile Ceramic Marble Granite Ceramic Porcelain 1/4, 5/16, 3/8, 1/2 inch

  • Tech information: Diameter 1/4 inch(6mm), 5/16inch (8mm), 3/8inch (10mm) & 1/2 inch (12mm).
  • The tile drill bit set is equipped with a 1/4 inch hexagonal shank and is therefore compatible with all common drills & cordless screwdrivers..
  • Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface. This allows for longer drilling without much wear on larger projects..
  • Diamond core drill bit developed to drill in extremely hard materials such as tile, ceramic, marble, granite, ceramic, porcelain, etc..
  • Attention: Begin drilling approximately at a 45° ( between the hole saw and the working surface ) angle and only moderate pressure is good for the service life of the dry core bit..
Check Stock

3 inch concrete diamond hole saw - Granite Tile Masonry Stone Marble Wet Dry Core Drilling Coring Drill Bits by STADEA

  • Stadea 3 inch concrete masonry granite tile diamond hole saw bit core drill bit for stone coring core drilling cutting.
  • Wet Dry Drill/Core through Concrete, Granite, Masonry, Tile, Stone, Marble sharply with precision.
  • Aggressive and durable diamond segments, Segment Height 9 MM, Width 24 mm, Thick 3.5 mm.
Check Stock

Dry Type 2″ Diamond Dry Coring Bit – Concrete Core Drill by BLUEROCK Tools

  • 2″ Dry Type Diamond Core Bit BLUEROCK Tools Brand.
  • 2” Outside Diameter, Overall Length: 11″ Approximate, Inside Barrel Depth: 10″ or 255mm.
  • For concrete, asphalt, brick, stone, rock and tile masonry.
  • Ventilated and ribbed for efficient dry core drilling.
  • Our BLUEROCK brand core drills have a 1 1/4″ spindle. Please see the 1 1/4” to 5/8” adapter if using this bit with our core drill.  .
  • Rotary use only. Do not use a hammer action..
  • See our other listings for Dry Core Bit Sets and Z1 Core Drills.
Check Stock

Diamond Core Drill Bit Set-4/5" 1" 1-3/8" 2" 3" 4" Diamond Hole Saw,for Porcelain Tile Ceramic Marble Granite Drilling with 5/8-11 Thread（20 25 35 50 75 100mm）

  • ✔Size --Diamond drill bit 4/5" 1" 1-3/8" 2" 3" 4"（20 25 35 50 75 100mm）, diamond height 10mm, total length 60mm, 5/8-11 thread of the tile drill bit..
  • ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime..
  • ✔Super Quality Raw Material --Using vacuum brazed technology ,which increases resistance to temperature and friction,to make the diamond particles better attach to the core steel,imporve the performance and lifetime.Constructed with high grade diamond grit for effortless cutting and improved durability in tough applications.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔Fast And Smooth Drilling --Special U-groove tooth shape and chip removal design of the tile hole cutter creates a high sharpness, you could drill smoothly with no broken edges.
  • ✔Machine --angle grinder (direct connection) or electric drill (with adapter ).
Check Stock

Mgtgbao 8PCS Black Dry Diamond Drill Bits Set, Ceramic Tile Core Drill bit for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Round Shank with Size 3/16~1/2 inch.

  • ☪Upgraded Dry Drilling Design : Mgtgbao Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • Water can be used as additional cooling to prolong the life of the bit. Surface plating can prevent the drill bit from rusting..
  • ☪Multiple Size Dry Diamond Core Drill Bit: The diamond drill bit set contains 5 pieces of dry diamond bits different sizes, including 2pc 3/16” (5mm), 2pc 1/4” (6mm), 2pc 5/16” (8mm) , 1pc 3/8” (10mm), 1pc 1/2” (12mm) fit your need..
  • ☪Widely Compatibility: black diamond drill is designed in round shank, which is compatible with most machines, such as hand drill, angle grinder, bench drill, also can be matched with side flutes help to remove debris and drill holes smooth and fast.
  • Depth mark is also useful for precise project..
  • ☪Easy To Carry: These Diamond drill bits are prevented from being in a gray box, and can be put back into the box for storage after you use it..
  • ☪Wildly Application: Mgtgbao dry diamond drill set can be applied for drilling clean holes to hard materials, which especially fits well for tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick and so on.
Check Stock

Mgtgbao Green 6PCS Dry Diamond Drill Bits Set, Core Drill bit for Many Hard Materials Granite Marble Tile Ceramic Stone Glass (NOT for Wood) Hex Shank Diamond Hole Saw Kits with 3/1 6to 9/16

  • ☪Upgraded Dry Drilling Design : Mgtgbao Diamond Drill Bit integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • Water can be used as additional cooling to prolong the life of the bit. Surface plating can prevent the drill bit from rusting..
  • ☪Multiple Size Dry Diamond Core Drill Bit: The diamond drill bit set contains 7 pieces of dry diamond bits different sizes, including 1pc 3/16” (5mm), 1pc 1/4” (6mm), 1pc 5/16” (8mm) , 1pc 3/8” (10mm), 1pc 1/2” (12mm) , 1pc 9/16” (14mm) fit your need..
  • ☪Widely Compatibility: black diamond drill is designed in round shank, which is compatible with most machines, such as hand drill, angle grinder, bench drill, also can be matched with side flutes help to remove debris and drill holes smooth and fast.
  • Depth mark is also useful for precise project..
  • ☪Easy To Carry: These Diamond drill bits are prevented from being in a gray box, and can be put back into the box for storage after you use it..
  • ☪Wildly Application: Mgtgbao dry diamond drill set can be applied for drilling clean holes to hard materials, which especially fits well for tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick and so on.
Check Stock

2-1/2\ Diamond Dry Core Bit for Brick and Block with SDS Plus Pilot Bit Adapter, 9.5\ Drilling Depth, 5/8\-11 Arbor

  • CORE DRILLING - diamond core bits are designed for soft brick or building block.
  • PILOT BIT ADAPTER - includes SDS Plus pilot bit adapter to fit SDS Plus core drills.
  • USE WET OR DRY - recommended to use with dedicated core drills or core drill rigs.
Check Stock

Delta Diamond Boss Hog Tuckpointing Mortar Raking Diamond Glitter Bit 4-5/8-inch Length X 1/4" Shank for Mortar Removal

  • MORTAR REMOVAL - Ideal for intricate and delicate mortar removal where a diamond blade wouldn’t fit or be too difficult to use..
  • VACUUM BRAZED - Made with premium super-abrasive vacuum brazed diamond, this bit will grind faster, last longer and cost you less than any comparable tool..
  • SPECIFICATIONS - 4-5/8" long X 1/4" shank fits on most drills. Use on a regular drill. Do not use a impact drill. Allow the bit to do the work, do not apply too much pressure, and allow bit to cool down during use to prevent bending or breaking..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws and cup wheels feature a lifetime limited warranty against warping, cracking and/or material defects. If any diamond tool (being used for its intended purpose with at least 50% of the wear remaining) fails to perform properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool will be replaced at no charge..
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

Oudtinx Diamond Drill Bit Set, 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm - 30mm

  • SMALL RESISTANCE: Small incision resistance, opening speed is quickly, easy removal of chips and other advantages.Also help to open accurately. Large chip holes to ensure that when the punching smooth, punching accurate..
  • DURABLE: Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole..
  • IDEAL FOR: This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • TIP: Can be used with a standard electric drill (not included), Always use lubrication (water), otherwise the diamond core drill will burn. Warnings: Not for use on Concrete or for depths beyond about 1/2".
  • Water is required for lubrication when drilling..
  • 10 SIZES: Total 10 different sizes (6mm,8mm,10mm,12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm).Different sizes meet your different needs,help you in different places..
Check Stock

1inch Dry Diamond Drill Bits, 25mm Diamond Hole Saws for Porcelain Granite Tiles Brick Concrete Work with Angle Grinders & Electric Drills

  • 1Inch Diamond Hole Saw for Tiles – Vacuum Brazed Diamond coat designed for clean cutting in all types of tiles including Ceramic, porcelain, marble, granite, glass, and natural stone.
  • Fit Most Tools – 25mm Dry Diamond Drill Bit can be used on most angle grinders (5/8-11 thread) directly, or High Speed powered drills with the 3/8” Hex Shank Adaptor (included).
  • Speed and Smooth Cutting – With a slotted to aid debris removal and cooling, you will get perfect holes with professional finish and minimum chip in a fast manner.
  • Applications – Diamond Hole Saws kit will save you time and money in jobs such as bathroom and kitchen tile fittings, stone countertop fitting..
  • User Tips – for accurate positioned hole, please place the high-speed drill at a 45-degree angle to start a position groove, then bring the drill up upright slowly and continue.
  • cool the bit enough to keep the diamond core drill bit sharp longer.
Check Stock