ReviewsIn Nut Driver 2

ABN Nut Driver Bit Set - 5/16in Hex Nut Driver Set Industrial Strength Magnet 10pc Impact Driver Magnetic Nut Driver Set

  • [Improve Your Tools]: Upgrade your high torque drills with the ANB Impact Nut Driver Set.
  • Standard bits bend and break, but the industrial-strength magnetic nut driver can withstand multiple uses without reducing rounding of hex fasteners.
  • [Use Bits for Any Project]: Utilize the multi nut driver kit when screwing nails into wood or metal.
  • Precision tip allows you to reach tight spaces where your fingers cannot reach.
  • Rely on the drill socket set when home renovating, fixing up your car, or repairing panels.
  • [Keep Tools for Years to Come]: Replace bits less frequently with the long-lasting steel socket driver set.
  • Lightweight hex nut driver bits are heat-treated for durability.
  • [Attach To Existing Tools]: Attach nut driver bits to high torque drills or impact drivers.
  • Power nut driver set is ideal for driving hex fasteners and self-taping screws.
  • Lobular design reduces stripping damage to your projects while extra strength magnet allows quicker retention.
  • [Package Details]: 10pc silver nut driver set drill bits measure 6 inches (15cm) tall and 5/16 inches (0.8cm) wide.
Check Stock

Best Value 16-Piece Precision Screwdriver Set | Phillips, Flat, Hex and Nut Driver

  • High strength chrome vanadium steel shafts reduce wear-outs and stripping for longer tool life.
  • Corrosion and rust resistant black oxide finish provides durability and longevity.
  • Swivel end cap allows constant finger pressure while driving and non-slip knurled handle grips for maximum turning power.
  • Comes with an additional lever bar for assisted torque and extra leverage on hex driver and nut driver handles.
  • Set includes 16 pieces mini screwdrivers in a handy storage and organization case: (4) Phillips #00, #0, #1, #2.
  • (6) Slotted 1.0, 1.4, 2.0, 2.4, 3.0, 3.5 mm.
Check Stock

GreatNeck #2 x 1/4 Inch Offset Screwdriver

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Klein Tools 80045 Screwdriver and Nut Driver Tool Kit, Includes Magnetic 11 in 1, Multi-Bit Stubby and Electronics Screwdrivers, 3-Piece

  • MAGNETIC BARREL holds 8 popular tips and converts to 3 nut driver sizes.
  • SECURELY HOLD BITS AND FASTENERS with the strong, rare earth magnets.
  • COMPACT INTERCHANGEABLE SHAFT holds 4 universal tips and converts to 2 nut driver sizes.
  • BIT SIZES - nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
Check Stock

GreatNeck SD11RC 11 in 1 Screwdriver and Nut Driver Set Multi-Bit Cushion Grip Multi Tool Screwdriver Kit HVAC tools Electrician Tools

  • 11-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, flat head screwdriver bits, and square-tip bits used most often by....
  • THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage.
  • Superior socket design for secure bit fit.
  • INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16", 1/4"), Phillips head screwdriver bits (#1, #2), Square drive bits (#1, #2), and....
  • DOUBLES AS A NUT DRIVER: Multi screwdriver’s shaft converts to nut driver sizes: 1/4", 5/16" and 3/8".
  • MULTIPURPOSE TOOL: 11 Nut and Screw drivers in one tool. If you're looking for a multibit screwdriver with the most common torx, square bit, slotted,....
Check Stock

Klein Tools 32477 Multi-Bit Screwdriver / Nut Driver 10-in-1 Multi Tool, Industrial Strength Bits, Phillips, Slotted, Square and Torx Bits

  • Multi-Bit Screwdriver / Nut Driver shaft holds 8 popular tips and converts to 2 nut driver sizes.
  • Interchangeable blade for quick and easy switch out.
  • End of handle is marked to quickly identify tool.
  • Cushion-Grip handle for greater torque and comfort.
  • Includes 5/16-Inch and 1/4-Inch (8 and 6 mm) nut driver sizes.
  • 1/4-Inch and 3/16-Inch (6 and 5 mm) Slotted.
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock

Xcelite 99PR 14-Pc. Tool Kit in Roll Pouch

  • Drive: slotted, Philips drive size: 3/16", 1/4" (Slotted), #1, #2 (Philips), 3/16" To 1/2" (Nut driver blades) finish: Polished Chrome includes: (2) slotted screwdrivers, (2) Philips screwdrivers, (9) nut driver, (1) regular handle, (1) canvas case.
  • Material: high carbon steel (blades), Hardened steel (sockets) Number of pieces: 14.
Check Stock

Klein Tools 32561 Multi-Bit Screwdriver / Nut Driver, 6-in-1 Stubby Screwdriver with 2 Phillips, 2 Slotted Bits, 2 Nut Drivers

  • Multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • INCLUDES: non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • Compact design features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
  • Replacement bits available: Cat. Nos. 32396, 32398, 32412.
Check Stock

Crescent CP4PCSET 4 Pc. Phillips® Acetate Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock