ReviewsIn line Amplifier

NVX Powered Boost 2017-2022 Tesla Model 3 Sub Upgrade Kit with Amp, Sub, Box & Wiring Kit

  • Our BOOST enclosures were painstakingly designed by our in-house engineers to combat the lack of rich and deep bass commonly associated with the factory sound system. Each of our enclosures come equipped with NVX’s top of the line subwoofers, so you know your enclosure will bring the noise..
  • The NVX BOOST subwoofer enclosures work with what is already have in your car, especially with an aftermarket stereo. No need to purchase any other speakers, subwoofers, or other parts. You can buy either the BOOST package by itself or purchase the entire kit which includes an amplifier, amplifier wiring kit, and lineout converters..
  • Our BOOST series of subwoofers offer a simple and seamless installation fitting in your trunk. Each one of our BOOST subwoofers comes with a step-by-step guide on how to install it. You can also check out our website for more information about your BOOST Subwoofer.
  • What Comes with the Kit: NVX BE-TM3-VSW10S2 Tesla Model 3 Aftermarket Subwoofer and Box Upgrade / NVX VADM1 500W RMS Class D Monoblock Car/Marine/Powersports Amplifier with Bass Remote / NVX XKIT82 100% Copper, 2-Channel True Spec 8 Gauge Amplifier Installation Kit / NVX XLCA2 2-Channel Line Out Converter.
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

  • 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
  • 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
  • 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • INPUTS/OUTPUTS: Low level RCA inputs and outputs.
  • Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
  • FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
  • Designed to be high sound quality with minimal distortion.
  • Maximum heat dissipation which minimizes distortion.
  • SPECIFICATIONS: Variable voltage: 0.2 5 volts.
  • Crossover type: Electronic switch FULL / LPF / HPF.
Check Stock

JBL DSP4086 8-Channel Class D Amplifier Design with Digital Signal Processing

  • Small footprint, All-in-One Class D Amplifier with DSP Control: JBL DSP Amplifier has everything you need to create a professional sound quality audio system with the ability to mount your amplifier in tight spaces..
  • Everything You Need to Get Started: JBL DSP Amplifier has everything you need to create an audio system, or expand your existing one, plus the ability to add more power by using it as a line driver when you are ready for your next power upgrade..
  • Simple Tuning Interface with Complex Features: Easy-to-use tuning interface anyone can understand, learn and control with enough horsepower to satisfy experienced installers..
  • Versatile Connectivity: This amplifier has balanced differential inputs to provide you with the best sound quality & noise rejection, can accept RCA or speaker-level inputs so it’ll work in almost any system..
  • Convenient Bass Control: Wired remote control allows for quick adjustment of low frequency output with -30 to +6dB adjustment directly from the driver’s seat.
Check Stock

Lanzar Amplifier Car Audio, 2 Channel, 1,000 Watt, 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG237) , BLACK

  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators.
  • and thermal, overload, and speaker-short protection..
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio..
Check Stock

Rockville Rock Shaker 10\ Inch Black 600w Powered Home Theater Subwoofer Sub

  • Features: Rockville Rock Shaker 10 Black 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS....
Check Stock

XDUOO TA-26 6N5P 6N8P AMP High Performance Tube Line Out Pre-amp Gold-Plated RCA Headphone Amplifier

  • Adopt 6N8P tube for pre-amp making voice sweet and exquisite..
  • Using 6N5P tube for buffer to bring soft and charming sound..
  • The Line Out can be used as Pre-amplifier： It has one line output, through the tube, and controlled by volume. It can be used as the Pre- amplifier of all kinds of audio amplifier or active speaker, and improve the sound quality of audio amplifier or active speaker..
  • Professional Resistances and Capacitors ；Gold-plated RCA port for amplifiers or active speakers..
  • Aluminum alloy shell sandblasted texture panel ：Sandblasted texture panel and solid aluminum alloy case are high end atmosphere, and can effectively resist external interference..
Check Stock

Rockville Rock Shaker 10\\\ Inch Wood 600w Powered Home Theater Subwoofer Sub, Rock Shaker 10 Wood

  • Features: Rockville Rock Shaker 10 Wood 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS ....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2000 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Power – This Class D 2000 Watt Car Amplifier has a power rating distribution as followed 2000 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 500 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • RCA Ports - The RCA Jacks in this bass boost monoblock car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp.
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • QUALITY - This Class D Monoblock Amplifier exhibits quali....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2500 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • Power – This Class D 2500 Watt Car Amplifier has a power rating distribution as followed 2500 X 1 @ 1 OHM, 1250 X 1 @ 2 OHMS, 825 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to ....
Check Stock

Premium Lanzar Car Audio, Amplifier Car Audio, Car Stereo Amplifier, 4,000 Watt, 4-Channel, Mosfet Amplifier, RCA Input, Subwoofer Bass Control, Power Amp, LED Indicator, Car Electronics

  • ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in today's audio files.
  • INTELLIGENT DESIGN: The car audio amplifier features include power and protection LED indicators.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
Check Stock