ReviewsIn line Compressed Air Dryer

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

Check Stock

HEAVY DUTY INDUSTRIAL 3 STAGE COMPRESSED AIR CLEANER MOISTURE TRAP COALESCING FILTER DESICCANT DRYER 3/4 MANUAL DRAIN

225PSI MAX, INDUSTRIAL 3 STAGE AIR CLEANER. 1" NPT INLET AND OUTLET, 11oz METAL BOWLS WITH SIGHT GLASS, WALL MOUNTING BRACKETS.
STAGE1: Particulate Filter / Water Trap will remove 95% of initial moisture and contaminents.
STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
STAGE 3: Desiccant Air Dryer removes all remaining moisture and dries out the compressed air downstream to your pneumatic tools.
225PSI Max Output, Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.

Check Stock

Medify MA-112 Air Purifier with H13 True HEPA Filter | 2,500 sq ft Coverage | for Smoke Smokers Dust Odors Pet Dander | Quiet 99.9% Removal to 0.1 Microns | Black 1-Pack

225PSI MAX, INDUSTRIAL 3 STAGE AIR CLEANER. 1" NPT INLET AND OUTLET, 11oz METAL BOWLS WITH SIGHT GLASS, WALL MOUNTING BRACKETS.
STAGE1: Particulate Filter / Water Trap will remove 95% of initial moisture and contaminents.
STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
STAGE 3: Desiccant Air Dryer removes all remaining moisture and dries out the compressed air downstream to your pneumatic tools.
225PSI Max Output, Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.

Check Stock

1 Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator 4 Stage In Line Air Filtration System

1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..

Check Stock

Plews & Edelmann 56-081 Desiccant Dryer , Black

Amflo compact desiccant dryers have been engineered to deliver extremely dry compressed air to protect pneumatically operated equipment from the adverse affects of moisture.
A regular filter and an oil removal filter should be used as a prefiltering system immediately ahead of the desiccant dryer - a regular filter may be required after the dryer to remove desiccant dust.
Features an aluminum main body, metal bowl with sight glass, 70 Micron porous polypropylene internal inlet filter, 40 Micron sintered bronze internal outlet filter, 300 psi Max pressure.
1/2 inch port size, 1 qt capacity Steel bowl is rated at 250 psi at 120 degrees F.
for compressed air systems only - not for use with fluids.
When desiccant bead has changed Color from dark Blue to Pink the entire desiccant must be replaced or regenerated by placing it in a drying oven at 275 degree F until it turns dark Blue again.

Check Stock

Van Air Systems 80-1500 D8 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 1 50 lb Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 50 CFM, 3/4\ NPT, White (Pack of 3)

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D8 dryer vessel, model F200-55-1/2-B-MD-PD6 after-filter, one 50 lb pail of Dry-O-Lite desiccant, mounting bracket, and manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.

Check Stock

Van Air Systems 80-1501 D12 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 3 50 lb Pails of Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 100 CFM, White (Pack of 5)

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D12 dryer vessel, model F200-100-1/2-B-MD-PD6 after-filter, three 50 lb pails of Dry-O-Lite desiccant, and a manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.

Check Stock

Industrial Service Solutions ALWITCO X07 Atomuffler Air Dryer Muffler | 3/4 inch NPT Male, Single Chamber, 175 PSI | Replacement Part | Dual-Stage Filter | for Compressed Air Equipment & Systems

DUAL-STAGE FILTER FOR LONGER ELEMENT LIFE - Built for compressed air dryers, it effectively traps dust and other particulates in the primary stage of the filter. Reduces noise in the second stage to maintain a safe and comfortable work environment..
COMPATIBLE WITH DIFFERENT EQUIPMENT - The X07 Air Dryer Muffler is compatible with various compressed air filters and systems. Designed to fit and match the specifications of your original equipment to ensure your compressor performs at its best..
HIGH-QUALITY MUFFLERS BUILT TO LAST - Exclusively manufactured by ALWITCO, our air dryer muffler lasts longer than generic parts. Recommended by leading noise consultants and safety engineers all around the world..
WIDE RANGE OF INDUSTRIAL APPLICATIONS - Our specialized solutions are engineered for various industries. Suitable for air-operated equipment used in General Manufacturing, Automotive, and other important sectors..
TRUST THE ORIGINAL - With more than 65 years of history in manufacturing industrial noise control devices, Allied Witan Company helps promote health and safety in the workplace with clean, quiet, and reliable products that you can rely on..

Check Stock

NANPU 3/4 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 3/4" NPT Fittings, 1 ....

Check Stock

NANPU 1/2 NPT Industrial Grade 3 Stage Air Drying System - Particulate Filter Coalescing Filter Desiccant Dryer & Air Regulator Metal Bowl Auto Drain Suitable for Paint Spray＆ Plasma Cutter

【High Pressure Resistance】Works Perfectly in the Pressure Environment of 30-175 psi.
【High Degree of Safety】Excellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process..
【Stage 1: Filter & Regulator】Compressed Air Water Trap Filter Equipped with 5 Micron Element, which has Excellent Filtering Performance, Much Longer Life and Reuse Feasibility, Remove Most of Moisture and Particles in the Air Line.
Pressure Regulator Accurately Adjust and Stabilize the Air Pressure..
【Stage 2: Coalescing Filter】The Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up..
【Stage 3: Desiccant Air Dryer】The Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink..
【Accessories】2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fitings, 1 x....

Check Stock