ReviewsInch And A Half Hose

Tomekji Garden Hose Holder [ Very Robust and Stable ] Detachable Heavy Metal Water Hose Stand, Unlike Garden Hose Reel and Hose Reel Carts, It is a Free-Standing Type for Outdoor Yards, Rust-Proof

  • 【Enhanced hose holder】: Do you want this purchase to be great value for money? We have collected the shortcomings of hose holders from multiple sales platforms. After half a year of summary and experimentation, We have improved the hose holders for outside. With a total height of 43.5 inches and a load capacity of over 50 pounds, the garden hose holder is extremely strong and stable. We think it will last 5 years or more..
  • 【Heavy gauge steel construction】: We increased the thickness of the steel and did pickling and electrophoresis treatments (Most products are just painted to prevent rust). These processes can keep the hose stand from rusting for many years. And laser welding is used at the interface between the main pole, nails, and load-bearing frame (this is very important), which makes the interface very strong and will never break. These complex processes ensure that you get a high-strength hose holder..
  • 【Strengthen four anchor points】: For many water pipe brackets that fall down due to hanging heavy water pipes, we have made the following improvements: changed the anchor points from three to four and lengthened and thickened them, so that they can be deeper Enter the ground more firmly, even if the ground is moist soil, the load is 2....
Check Stock

Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose, 35 Ft, Silver

  • The 93048 is compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types.
  • The 93070 permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power.
  • The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle.
  • The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush.
  • To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening.
Check Stock

25 Foot - Python No Spill Clean and Fill Aquarium Maintenance System

  • ...D SYSTEM: Make water changes a breeze with Python No Spill Clean and Fill Aquarium Maintenance System, the complete ready-to-use system that easily adapts to most faucets to fill and drain aquariums and clean your substrate.
  • FAST AND EASY WATER CHANGES: Includes a hose, 10-inch gravel tube, shut off valve, hose connectors, faucet pump, and universal brass faucet adapter to clean your fish tank in the blink of an eye with no buckets, no siphon, no mess, and no tank tear downs.
  • HIGH QUALITY FDA-APPROVED MATERIALS: We use only the best top-quality FDA-approved materials and UV-stabilized, non-porous tubing to keep your aquarium water safe, clean, and free from dangerous chemical toxins.
  • WILL NOT DISTURB FISH OR DECOR: Our water change kit allows you to quickly complete routine maintenance on tanks of all sizes in half the time without disturbing fish or aquatic decor.
  • MADE IN THE USA: After years in the industry, we have created a wide variety of premium American-made aquarium supplies, cleaners, pond products, and accessories so you can spend more time enjoying your fish and less tim....
Check Stock

Boao 28 Pieces Drip Irrigation Fittings Kit 1/2 Inch Tubing Set Including 7 Tees 7 Couplings 7 Elbows and 7 End Cap Plugs Drip Irrigation Barbed Connectors for Compatible Drip or Sprinkler Systems

  • 28 Pieces set: you can save time and obtain everything you need one time.
  • Starting your drip irrigation system installation with this set of essential components for building a maintenance-free drip system.
  • Application: these 16 mm or 17 mm barbed fittings work with half inch drip tubing whose inside diameter is from 0.560 to 0.600.
  • Compatible with many types of tubing as well as 1/2 inch blank tubing or drip lines, fit for garden greenhouse, flower bed, patio and lawn.
  • Quick and simple to install: these hose connectors are easy to mount without any additional tools, which is a helpful solution for both indoor appliances and outdoor garden use, and provide effective, lasting and watertight connections for your hose system.
  • Long-lasting: these 16 mm or 17 mm drip fittings are made with durable tubing plastic, resistant to sun exposure and chemical corrosion.
  • Package includes: 7 pieces tees, 7 pieces couplings, 7 pieces elbows, 7 pieces end cap plugs.
  • A total of 28 pieces to meet your long-term needs.
Check Stock

Polaris Fuel Rail Damper Assembly, Genuine OEM Part 2521101, Qty 1

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

  • 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
  • Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Skylety Portable Air Conditioner Exhaust Hose, Counterclockwise 5 Inch Diameter Universal (5 Inch Diameter, 59 Inch Length)

  • Feature: hose made of polypropylene has good flexibility, durability and portability, which is a good alternative when necessary exhaust hose ruptures.
  • Adjustable length: the length of exhaust hose can be extended.
  • You can shorten the exhaust hose to the length of 12.6 inch/ 32 cm or extend it to 59 inch/ 150 cm.
  • Application: the exhaust hose is suitable for various portable air conditioner models which use the same hose with 5 inch/ 13 cm diameter and counterclockwise threads.
  • Easy to install: gently stretch the exhaust hose to meet the existing hose.
  • Clockwise rotate the hose to complete the installation.
  • Notice: Our hose is 5 inch/ 13 cm in diameter (outer edge to outer edge) with counterclockwise threads.
  • Please confirm the size and the threads you need before purchasing.
Check Stock