ReviewsInch Flat Rubber Gasket

4 Pack Gray Gaskets Replacement Part for NutriBullet 600W 900W NB-101B NB-101S NB-201 Blenders

  • Made from food grade silicone rubber. Outside diameter 4 inches.
  • This gasket has a little ridge or a lip..
  • Comes with 4 (four) DURABLE gray gasket replacements, made to last.
  • Compatible with 600W / 900W Extractor blades and Flat milling blades.
  • Please note: NOT COMPATIBLE with Nutri Ninja, NutriBullet RX, Magic Bullet or Baby Bullet blenders..
  • These gaskets are meant for those NutriBullet blender with a lip as shown in the pic. Will not fit NutriBullet blenders where the gasket doesn't have....
Check Stock

Replacement Ice crusher blade and Flat blade with gasket,Gear &Rubber Shock Pad Replacement Parts,Compatible with Magic Bullet Blender (Model MB1001/MB 1001B) and Party bullet kits:PBG-1801/PBR-1801M

  • Replacement Ice crusher blade and Flat blade with gasket &Rubber Shock Pad Replacement Parts, Compatible with Party Bullet kit:PBG-1801/PBR-1801M/PB BX008-02.
  • Compatible with magic bullet of model: MBR-1701 /MBR-1702 /MBR-1101/ MB-BX1770-02/ MB1001/ MBR-0301/MBR-0701P/MB1001B/.
  • STAINLESS STEEL AND DISHWASHER SAFE: Each replacement part comes with stainless steel serrated blades that make it easier to power through ice and frozen fruit..
  • This set inculde :1pcs ice shaver blade,2pcs extra gasket ring ，1pcs flat Blade ,3pcs Rubber Shock Pad,1pcs blade gear Outer Diameter:Standard 88mm.
Check Stock

2 Pack Gray Gaskets Replacement Part for NutriBullet 600W 900W NB-101B NB-101S NB-201 Blenders

  • Made from food grade silicone rubber. Outside diameter 4 inches.
  • This gasket has a little ridge or a lip..
  • Comes with 2 (two) DURABLE gray gasket replacements, made to last.
  • Compatible with 600W / 900W Extractor blades and Flat milling blades.
  • Please note: NOT COMPATIBLE with Nutri Ninja, NutriBullet RX, Magic Bullet or Baby Bullet blenders..
  • These gaskets are meant for those NutriBullet blender with a lip as shown in the pic. Will not fit NutriBullet blenders where the gasket doesn’t have a lip..
Check Stock

Dreld 4Pcs 66mm/2.6inch Blender Rubber Sealing O-Ring Gasket, Replace Part # 132812-07, Replacement Part Fit for Black & Decker Models BL1900 BL3900 BL4900 BL5000 BL5900 BL6000 BL9000 (Pack of 4)

  • [BENEFIT TO BLENDER]: Better protect the mixer and seal it, replace the old seal and keep the lid clean and watertight. It can be used for a long time. The rubber sealing O-Ring gasket is a necessary blender accessory in case of emergency..
  • [PRODUCT NOTE]: Application to the common replacement part, seal sits between the top of the blade and the bottom of the jar. Dimension-OD: 66mm/2.6inch, ID:51mm/2inch, Thickness: 2mm/0.079inch. Please check the diameter of the ninja mixer before you buy..
  • [PREMIUM QUALITY]: Strict quality control standards to Build and test. Not Genuine, but the quality is better than the OEM. Made by Premium Quality food grade rubber, superior toughness, not easy to deformation, convenient to clean. Perfect match and Good Choice for Direct replacement of original parts, easy installation, can replace juicer or blender original gasket..
  • [GUARANTEE AND SERVICE]: The rubber sealing O-Ring gasket Replacement Part completed with a One-year Warranty. Save much money off dealer prices. If the O-Ring gasket once failed on your blender, simply contact us for a replacement or refund..
  • [PRODURT COMPATIBLE]: Replaces Black and Decker Part Number 132812-07. Fits for Black and Decker blender models BL1900, BL3900....
Check Stock

Hicarer 3-1/2 Inch (90 mm) Quartz Clock Fit-up/Insert with Arabic Numeral (Gold)

  • Dimensions: overall diameter is 3-1/2 inch/ 90 mm.
  • Fit round hold diameter/ mounting diameter is 3.0 inch/ 78 mm.
  • Mounting depth is 0.6 inch/ 15 mm, please check the size before buying.
  • Features: the quartz clock insert features a nice colored trim and cute face, clear plastic lens, and black arabic numerals on white dial for easy reading.
  • Rubber band gasket: rubber band gasket securely hold the insert clock in place and there is slight irregularity in the hole.
  • Wide applications: plastic rim with quartz movement fit for crafts or replacing old clock faces.
  • Power: only require 1 piece AA battery (not included).
  • Warm note: clock is intended for indoor use only, not weather resistant.
Check Stock

Hicarer Round Clock Insert 3-1/8 Inch (80 mm) Quartz Movement Roman Numeral Gold Trim (Gold Trim)

  • Design: the 80 mm quartz clock insert with roman numerals is designed with plastic rim.
  • Measurement: round clock insert is 3-1/8 inch (80 mm) in diameter.
  • Mounting diameter is 3 inch/ 76 mm and mounting depth is 0.7 inch/ 18 mm.
  • Clear cover with border: quartz movement with plastic rim is good for diy crafts or replacing old clock faces.
  • The clear cover allows for easily read the time.
  • Rubber band gasket: wall clock insert with rubber band gasket securely hold the insert clock in place and allows for slight irregularity in the hole.
  • Power: requires 1 piece 1.5 V AA battery (not included), please check the size before purchasing.
Check Stock

Hicarer 3-1/2 Inch (90 mm) Quartz Clock Fit-up/ Insert with Roman Numeral, Quartz Movement (Gold Trim)

  • Dimensions: overall diameter is 3-1/2 inch/ 90 mm.
  • Fit round hold diameter/ mounting diameter is 3.0 inch/ 78 mm.
  • Features: the quartz clock insert features a trim, clear plastic lens, and black roman numerals on white dial for easy reading.
  • Rubber band gasket: rubber band gasket securely hold the insert clock in place and allow for slight irregularity in the hole.
  • Wide applications: plastic rim with quartz movement fit for crafts or replacing old clock faces.
  • Power: only require 1 piece AA battery (not included).
  • Warm note: clock is intended for indoor use only, not weather resistant.
Check Stock

2.8 Inch/ 70 mm Quartz Clock Insert, Gold Trim, Arabic Numeral, Quartz Movement (Silver Trim)

  • Overall diameter: the front face/ bezel diameter of this insert is approx. 2.8 inch/ 70 mm.
  • Suitable mounting diameter: this quartz movement fit round hole diameter of 2.4 inch/ 61 mm, suitable mounting depth is 0.7 inch/ 17 mm.
  • Appearance and surface: black Arabic numerals on white face, clear glass lens, plastic case with gold colored plastic bezel trimSA0849: Appearance and surface: black Arabic numerals on white face, clear glass lens, plastic case with silver colored plastic bezel trim.
  • Rubber band gasket: rubber band gasket securely hold the insert clock in place and allow for slight irregularity in the hole.
  • Needed power: just need 1 of 1.5 V AAA battery (not included) can run a long time.
Check Stock

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

  • 600 WATT POWER: This 8-inch car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
Check Stock

Hicarer 2.8 Inch/ 70 mm Quartz Clock Insert, Gold Trim, Arabic Numeral, Quartz Movement (Gold Trim)

  • Overall diameter: the front face/ bezel diameter of this insert is approx. 2.8 inch/ 70 mm.
  • Suitable mounting diameter: this quartz movement fit round hole diameter of 2.4 inch/ 61 mm, suitable mounting depth is 0.7 inch/ 17 mm.
  • Appearance and surface: black Arabic numerals on white face, clear glass lens, plastic case with gold colored plastic bezel trimSA0849: Appearance and surface: black Arabic numerals on white face, clear glass lens, plastic case with silver colored plastic bezel trim.
  • Rubber band gasket: rubber band gasket securely hold the insert clock in place and allow for slight irregularity in the hole.
  • Needed power: just need 1 of 1.5 V AAA battery (not included) can run a long time.
Check Stock

Hicarer 2-1/8 Inch (55 mm) Quartz Clock Insert, Zinc-Alloy Metal Case, Arabic Numeral, White Face (Gold)

  • Useful rubber gasket accessory: there is a rubber gasket which is useful to securely keep the insert in place.
  • Design: Arabic numerals on white face, clear glass lens, gold colored bezel trim.
  • Long life battery: the quartz clock insert is built-in long life battery which can be applied for about 2 years.
  • Simple and convenient, you don't need to buy a battery specially.
  • Measurement: overall diameter is 2-1/8 inch (55 mm).
  • Fit round hole diameter: 1.97 inch (50 mm), please check the measurement before buying.
  • Application: the Japanese PC 21 clock movement fits for many popular glass and craft clocks, good for craft projects.
Check Stock