ReviewsInch Split Flange

InSinkErator PROCCPLUS Pro Series 3/4 HP Food Waste Disposal with CoverStart and Evolution Series Technology

• Extended sink flange, suitable for quartz farmhouse sink and kitchen sinks with stainless steel material..
• Golden Extended Sink flange with deep basket strainer fits for 3-1/2 inch standard sink drain opening. The deep basket strainer can be easily catch....
• Deep Garbage Disposal Sink Flange fits standard garbage disposal units, 4-1/2-Inch(114mm) rim diameter, 2-5/8-Inch(66mm) depth, deep sink flange..
• Golden deep sink flange includes 3 extended bolts. Easy to install..
• Coordinates with golden composite sinks and stainless steel sinks..

Regal Beloit B2855 Century 2 Horsepower 230V 3450 RPM Stainless Steel Continuous Single Phase Pool Pump Motor with Square Flange for Inground and Above Ground Pools

• SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
• CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
• SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
• THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
• FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.

Kelbert-1-1/8" Two Hole Pins Set - Handy 6061 Aluminum Lightweight Construction 2 Hole Flange Alignment Pin with Anodized Black Oxide Finish That?s Manufactured by SGS Certified Company

Heavy Duty 1,000 Pounds Capacity Beam Trolley with Side Guide Rollers

• Suits 3 inch, 4 inch, and 6 inch tall I-Beams (measure top of flange to bottom of flange). 1,000-pound load capacity..
• Industrial grade I-Beam Trolley as used in automotive assembly plants. Rugged Cast Iron body construction..
• Comes with load carrying hook plate attachment, and side guide rollers to help the trolley glide smoothly, traverse corners and prevent unnecessary wear on track..
• Safety lug in casting adds additional safety.
• Adjustable to fit various flange widths. Compatible flange widths: 2.330 inches to 3.330 inches.

LASCO 03-1563 Chrome Plated Floor and Ceiling Split Flange Fits 2-Inch Iron Pipe

• Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
• Measurements – Hole diameter is 2.38 inch (60.33mm) and outside diameter is 4.53 inches (115mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
• Fittings - Fits 2 inch IPS (2.375" Outside Diameter) Galvanized Pipe or 2-1/4 (2.25" Outside Diameter) inch Copper Pipe. Perfect for bathroom and kitchen tubular pipes..
• Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
• Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

• 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
• 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
• With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
• Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
• Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

• 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
• Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
• There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
• Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.

Floor and Ceiling Plate Cover Split Flange Replacement and Repair Kit, Fits 1/2 Inch IPS Galvanized Pipe or 3/4 Inch Copper Pipe, Chrome Finish (Pack of 6)

• Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
• Measurements - Hole diameter is 0.84 inch (21.33mm) and outside diameter is 2.83 inches (72mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
• Fittings - Fits 1/2 Inch IPS Galvanized Pipe (0.84 Inch Outer Diameter) or 3/4 Inch Copper Pipe (0.875 Inch Outer Diameter). Perfect for bathroom and kitchen tubular pipes..
• Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
• Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..

MENNTY Toilet Flange with Wax Ring for Toilets Replacement Kit includes Bolts PVC Toilet Flange Repair Kit for 3" or 4" Pipes, Fit Toilet Install & Repair

• [Fits 3-inch or 4-inch Waste Lines] Toilet flange with wax ring for any NEW installation or REPAIR on 3-inch and 4-inch waste lines/ drain opening. Toilet wax ring replacement kit made repairing a leaky or wobble toilet and cracked flange easy..
• [Easy to install, without the help of a plumber] Install toilet flange repair kit at or above floor level,without the help of a plumber can be repositioned without damaging seal.
• [Assures a Perfect Seal]This toilet wax ring provides good deodorization and high viscosity, and is easy to form an airtight, deodorant, and waterproof seal and perfect solution to deal with unpleasant odors and leaks caused.
• [Product Specifications] Toilet flange-diameter:6.88 in,thickness:0.43 in.Toilet wax ring-diameter:5.4 in,thickness:0.92 in.Package includes bolts, washers, retainers, nuts and bolt caps..
• [Service] If you are installing of new floor mount toilet install or repair the old toilet,choose our toilet flange with wax ring. We always focus on product design and customer service.30-Day full refund and 1-Year Limited Service for you..

Danco 89331 Sink Hole Cover, White

• DISCREETLY COVER SINK HOLES - White finish provides stylish look to the sink plug in order to hide extra kitchen sink holes.
• RUST RESISTANT - Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures.
• EXTRA DEFENSE - Removed post style basket with kitchen sink hole cover catches unwanted debris.
• DIMENSIONS: 3-inch long shank x 1-3/4 inch outer diameter flange. Threaded 1/2 inch shank design..
• STYLISH DESIGN: Smooth flange cover in a white finish provides an aesthetic that will match your current kitchen appliances.

SHENGHUISS Boat Thru Hull Fittings for 1/2" Hose Marine Stainless Steel 316 Barbed Extra Long Straight Thru-Hull with Nut&Custom Gasket for Boat、RSV

• Material: Marine grade Stainless Steel 316, Surface: Mirror polished/High polish finish.Ultimate Corrosion Resistant..
• Overall Length:3.6inch(92mm), Thread length:2.5inch(64mm), Barb length: 1inch(25mm),.
• Outside flange diameter: 1.5inch(38mm), Barb diameter: 25.4 mm / 1'', Thread Size: 0.8 inch(22mm) , Weight: 4.8 oz(136 g).
• The Barbed long Straight Thru-Hull fits 3/8" inner diameter marine hoses. Includes 316 stainless steel mounting nuts and rubber gasket,installs easy..
• Underside of flange has a groove cut in it to trap a bead of silicone between it and the mounting surface. Flange head is very evenly polished. Nut mates with threads exactly.
• hardness of metal is excellent. Two slightly protruding pins within the interior of the drain allow for a wide blade flat screwdriver to be inserted and prevents the flange portio from turning when nut is installed..