ReviewsInch Straight Router Bit

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

1/4-Inch Shank Roundover Edging Router Bit Set, Woodworking Milling Cutter Tools Corner Rounding Edge-Forming Bit Set 1/8\

  • Micro-grain tungsten carbide cutters provide superior wear resistance and long life.
  • Can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing.
  • For increased work piece visibility, use shank bearing flush trim bit in a handheld router allowing the template to be positioned on top of the work piece.
  • Suitable for cutting composition materials, plywoods, hardwoods, and softwoods.
  • Package include: 4 Pcs 1/4 Inch Shank Versatile Round Over Edging Router Bit Set, 1/2.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

1\ Radius Roundover Router Bit 1/2\ Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

  • INDUSTRIAL QUALITY ROUND OVER BEADING ROUTER BIT: Excellent for producing smooth, uniformly rounded edges. Great for edging, beading and/or molding applications. And can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing..
  • USE RANGE for ROUNDOVER ROUTER BIT: Suitable for hard woods, mdf, laminate, particle board, plywood compact panel and etc. Avoid cutting metal and non-wood materials..
  • HIGH QUALITY CNC ROUNDOVER OVER BIT: The sharp YG6X virgin carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This round over edge bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, it can withstand some heavy duty use and the test of time..
  • Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Check Stock

HOHXEN Finger Joint Router Bits 1/4\ Shank Drawer Lock Router Bit Reversible Finger Joint Glue Joint Router Bit Carbide Joinery Wood Milling Cutter for DIY Door Table Cabinet Shelve Furniture

  • ...blades provides increased strength and utmost resistance. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning..
  • [Multi-purpose Use] The 1/4 router bit is designed for making wooden doors, wooden frame, cabinet box mortise, ideal for creating strong finger joints for straight or 90 degree corners for small boxes and crates. The router bit is suitable for all range's router such as handheld router and table router. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily..
  • [For Cutting Various Materials] Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Please avoid cutting ferrous metal and non wood materials,such as:steel,iron,sand,etc. The router bit is packed in a plastic box for easy storage and carry..
  • [Perfect After-sale Service] We always provide good customer service and purchase experience to our customers. We offer "24 Month" warranty on item that confirm to be manufacturer defect. If you have any questions, please email to our after-sale team, we will try our best to solve your problem..
Check Stock

Eyech 1/4 Inch Shank Flute & Bead Router Bit Set Canoe Joint Router Bits Woodworking Cutter Tools

  • Both of router bit are 1/4 inch shank,total length of the flute router bit : 1-3/4 inch, total length of the bead router : 2-1/8 inch,1/8 inch cutting depth.
  • Made of Carbide Tipped - Micro grain grade provides increased strength and utmost resistance for long-lasting performance.
  • Suitable for making cedar strip, hot tubs, planters, wooded canoe or lots of other curved shapes.
  • Cuts all composition materials,density board,solid wood, particle board, plywoods, hardwoods, and softwoods.
  • The flute-bead router bit use on router table use only, Stable and noiseless.
Check Stock

Amazon Brand - Denali 4-Piece 1/4 Straight Cut Router Bit Set

  • ideal for making grooves, edge trim, and more.
  • Includes 4 straight cut router bits with 1/4", 5/16", 3/8", and 1/2" cutting diameters.
  • Approximate cutting heights: 63/100"(16mm), 3/4"(19mm), 1"(25.4mm), and 1"(25.4mm).
  • 1/4" universal shank diameter ensures a secure fit in any table mounted or handheld router.
  • Made of 45# carbon steel with YG6 carbide blades.
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Mesee Set of 2 Pieces Extra Long Straight Router Bit Set 1/4-Inch Shank Double Flute Straight Grooving Bits Trimming Cutter Woodworking Milling Tools with 2 & 3 Cutting Height

  • 1/4 Inch Shank Straight Router Bit Set with 2 Different Cutting Depth: 2" and 3'', Cutting Diameter: 3/8''.
  • Double flute straight bits, designed for trimming, three-dimensional clearance angle, slotted and wood screw holes..
  • Solid hardened steel bodies with anti-kickback design, high hardness and toughness, high abrasion resistance, impact resistance..
  • Industrial grade C3 micro grain carbide blade for cutting wood, MDF, particle boards, plywood, panels, softwood, and other synthetic wood..
  • Suitable for a router table or desktop woodworking engraving machine like CNC hand-held and table-mounted portable router,can not be used for electric drill & drill machines..
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

Meihejia 1/4 Inch Shank Straight Dado Router Bit Set - 5 Sizes

  • 1/4 inch shank straight dado router bit set. Cutting diameter: 1/4", 3/8", 1/2", 5/8", 3/4"..
  • C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating..
  • Useful for edge treatment and grooving, great for all kinds of dado and other standard applications..
  • Suitable for solid wood, particleboard, MDF, plywood, etc. Create very smooth cuts..
  • Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines..
Check Stock