ReviewsInconel 713c

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

Araca ELPLP89 Replacement Projector Lamp Bulb for EPSON EH-TW7300 EH-TW9300 EH-TW8300 EH-TW9400 Powerlite Home Cinema 5040 5040ub 5040ube 5050 5050ub 5050ube pro Cinema 6040 6040ub 4040 4010

  • Compatible Models: ELPLP89 /V13H010L89 with housing, fully tested before leaving the factory..
  • New type of luminescent electrode, perfect performance and compatibility, easy to light up your projector..
  • 3500 hours life, ECO mode longer life, 2500 lumens brightness..
  • 200 days warranty, there is any problem, give you a free replacement or refund to you immediately..
  • For Projector Model: EH-TW7300 EH-TW8300 EH-TW8300W EH-TW9300 EH-TW9300W EH-TW9400 EH-TW9400W H710C H711C H713C H714C H715C Pro Cinema 6050ub /6040ub....
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

ABITAN ELPLP89 / V13h010l89 Replacement Projector Lamp for ELPLP89 for Epson powerlite Home Cinema 5040ub 5040ube 5050ub 5050ube 4010 pro Cinema 4050 pro Cinema 6040ub pro Cinema 6050ub Projector

  • The ABITAN: We are a Professional manufacture and supplier of light source for projection and stage, with more than 10 years experience.
  • QUALITY CONTROL: All Projector lamps will be Tested Strictly before leaving the factory, And they Show Stable Light Output about 2500 Lumins Over 3000-4000h life.
  • COMPATIBLE MODULES: for EH-TW7300 TW8300 TW8300/W TW9300 TW9300W H710C H711C H713C H714C H715C projectors..
  • EASY INSTALLATION: It is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.
  • WARRANTY: Include with every projector lamp we sell is our trusted 200-Day Guarantee. If you order a projector lamp from our company and you ara not satisfied for any reason, you may send the projector lamp back for a full refund or an exchange.
Check Stock

COOBAN ELPLP89 /V13H010L89 Replacement Projector Lamp Bulb with Housing for Epson PowerLite Home Cinema 5040UB 5040UBe 5050UB 5050UBe 4000 4100 EH-TW7300 EH-TW8300 EH-TW9300 Pro Cinema 4050 4040

  • Life：Increasing the brightness of the bulb seems to be an easy task,The most difficult thing to break through is how to extend the life of the....
  • Compatibility：Sometimes you may encounter a situation where the new bulb you bought does not work.This is usually caused by inaccurate matching of....
  • Assure：COOBAN provides 200-day free replacement or full refund warranty service. We always provide customers with high-quality and more practical....
  • Lamp Model: ELPLP89 /V13H010L89 with housing, perfect compatibility to ensure the output of high brightness and clear pictures. 2500 lumens....
  • Compatible Models: EH-TW7300 EH-TW8300 EH-TW8300W EH-TW9300 EH-TW9300W EH-TW9400 EH-TW9400W H710C H711C H713C H714C H715C, PowerLite Home Cinema....
Check Stock

MIDWEST Aviation Snip - Left and Right Cut Offset Stainless Steel Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-SS6510C

  • 2 PIECE OFFSET SET - Includes both left and right cut offset models. A favorite of professional sheet metal tradesman and contractors.
  • LONGEST LASTING CUTTING EDGE - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.
  • STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power.
  • COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage.
  • CUTS STAINLESS STEEL - Special Hardness models are recommended for cutting extremely hard materials such as stainless steel, inconel and titanium. MADE IN USA.
Check Stock

SpeTool 5Pcs/Set Flat Nose Double Flute Carbide End Mill 1/32' Cutting Dia Router Bits Cutter CNC Machine Tools for Carbon Steel Soft Alloy Steel Die Steel Tool Steel Cast Iron Wood

  • SIZE. 1/8" shank, 1/32" cutting diameter, 5/64" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock