ReviewsInconel600

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

  • The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
  • Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
  • Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
  • Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

MIDWEST Aviation Snip - Left and Right Cut Offset Stainless Steel Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-SS6510C

  • 2 PIECE OFFSET SET - Includes both left and right cut offset models. A favorite of professional sheet metal tradesman and contractors.
  • LONGEST LASTING CUTTING EDGE - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.
  • STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power.
  • COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage.
  • CUTS STAINLESS STEEL - Special Hardness models are recommended for cutting extremely hard materials such as stainless steel, inconel and titanium. MADE IN USA.
Check Stock

SpeTool 5Pcs/Set Flat Nose Double Flute Carbide End Mill 1/32' Cutting Dia Router Bits Cutter CNC Machine Tools for Carbon Steel Soft Alloy Steel Die Steel Tool Steel Cast Iron Wood

  • SIZE. 1/8" shank, 1/32" cutting diameter, 5/64" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size 1/8

  • ★【Pack of 2 / Premium Bright Finish】 Multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely....
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper....
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length,....
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1-1/4 inch, Overall Length: 2-1/4....
  • ★【IMPORTANT, PLEASE READ BEFORE BUYING】Tungsten Carbide or cemented carbide is a composite material, although it looks like a metal, it is a....
Check Stock

Midwest Tool & Cutlery Aviation Snip - Left Cut Regular Stainless Steel Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-SS6716L

  • LEFT CUT STANDARD AVIATION SNIPS - Designed for straight cuts and tight curving left cuts. Standard model snips are best for making short cuts and trim cuts..
  • CUTS STAINLESS STEEL - Special Hardness blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated to provide unequalled strength and edge life. Use for cutting extremely hard materials such as stainless steel, inconel and titanium..
  • PINCH-THRU-POINT CUTS - Forged blades cut 18 gauge cold-rolled steel from beginning of blade all the way to the tip with 20% less effort for easy and precise notch cuts..
  • KUSH'N-POWER GRIPS - Midwest's Kush'N-Power grips provide the perfect balance of comfort, grip and durability. Designed for the professional, these chemical resistant grips offer slip-free usage all day long..
  • 100% USA MADE - This Midwest product is American made using premium grade steel and the highest quality components. The result is a reliable long lasting tool you can count on..
Check Stock

276 Piece Titanium Twist Drill Bit Set with Bonus S2 Bits, 135° Tip High Speed Steel, Size from 1/16\ up to 1/2\ total 256 Piece, Ideal Drilling in Wood/Cast Iron/Aluminum Alloy/Plastic/Fiberglass, 20 Piece S2 Bits, Clear Lid Organization

  • Set contains 29 m42 Cobalt Drill Bits sizes 1/16" - 1/2" x 1/64" increments.
  • Cobalt Drills are effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium.
  • Gold oxide finish acts as a lubricant and provides wear resistance.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel.
  • Cobalt steel provides extended tool life compared to high-speed steel drill bits, and maintains the tool's toughness and hardness in high drilling temperatures.
  • Effortlessly grip the set in 1 hand as you would a travel coffee mug or leave it in the cup holder of your truck while on the way to a job.
  • When all hands are on deck, hang the drill index on your belt whether you're in the shop or field.
  • Unique round drill index combines form and function into 1 beautifully designed, easy to carry drill set.
Check Stock