ReviewsIncra Miter Sled

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Table Saw Small Parts Crosscut Sled - Table Saw Sled Kit Includes Blade Guard Miter Track Stop – 900 Angle Small Moldings Crosscut Saw - Table Saw Sled Features Zero-Clearance Support

  • Crosscut Sled For Table Saw: This miniature cross cut sled lets you use your table saw to cut small parts to length. Our sled includes a miter track....
  • Great for cutting: Our crosscut sled is great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out..
  • Zero-Clearance Support: This sled system features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and....
  • Extremely Durable: Our aluminum table saw sled is ideal for constant repetitive use. This zero clearance table saw insert does not absorb moisture and....
  • Fits Most Table Saws: A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The rear-mounted blade guard is....
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • ... 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence sys....
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • ... stock from sliding or drifting in response. This, coupled with the heavy press switch, can keep your stock firmly in place..
  • REFERENCE: Transparent guide runs along the fence 51mm (2) above the table, to enable compatibility with most router table fences and prevent cutting into the sled. Using a fence instead of a miter bar installed at the bottom means that you will always be parallel to the router table fence. This is a significant time saving advantage, as you will no longer need to constantly readjust the router table fence..
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

VEVOR Precision Miter Gauge 24 Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max Stock Support and a Repetitive Cut Flip Stop Miter Saw Fence w/Laser Marking Scale

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient.....
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance....
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped....
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix....
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables....
Check Stock

UHMW Precision Milled Bar 3/4\ X 3/8\ X 36\ For Jigs, Fixtures or Miter Slots (size 3/4\ x 3/8\). Slick Durable Material Slides with Ease. Ideal for Table Saws, Router Table and Bandsaws (2 UHMW Bars)

  • ... 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence sys....
Check Stock

Woodpeckers Precison Woodworking Tools Router Table Coping Sled

  • Traps board between adjustable top plate and fence with slotted top plate.
  • Easily adjusts for material up to 5-1/2″.
  • Two clamps move to the center of the work piece to prevent lifting.
  • Clear guide allows the sled to track along the fence rather than the miter slot.
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock