ReviewsIndexable Ball Grooving Bars

HHIP 3900-5308 Bushing for A Series S Holder 40-Position Tool Post, MT2 Taper, 1-3/16\ Holder Hole Diameter

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.
Check Stock

GEARWRENCH 33\ Extendable Indexing Pry Bar - 82220 and GEARWRENCH 29-48\ Extendable Pry Bar - 82248

  • 8" and 10" Pry Bars Provide Leverage in Tight Confines.
  • 16" Pry Bar for Leverage in Medium-Duty Automotive and Industrial Applications.
  • 14 Locking Head Positions for Unmatched Access.
  • For Engine Repositioning and Placement, Aligning Steel Components and Fabrications and Repositioning Equipment.
  • Head Indexable Through 180° for Greater Leverage.
Check Stock

Skip Hop Developmental Learning Crawl Toy Beetbox Farmstand Grow & Play

  • Get baby moving and grooving to the “beet” with our adorable crawl ball. Just switch it on and keep the ball rolling for fun motion-activated....
  • Encourages crawling and musical creativity with 3 motion-activated beatbox-style songs play when ball is turned on and rolled.
  • Fun start-up sound when ball is turned on and rattle beads respond to shaking or rolling.
  • Coordinates with our Farmstand Collection.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

Ball Turning Attachment For Lathe-Turns Round Concave and Convex Metal-Sphere Radius ball turning

  • This fits straight onto the cross slide of your Myford & similar size lathe machine..
  • Comes with a 1 Indexable TNMG16 Insert for best turning finish and results with 6 edges of this single insert to use while working..
  • The insert tip should be adjusted to the given reading for achieving the desired size of the ball..
  • Pls note the scale is a radius reading, which means that for any set parameter on this scale, you will get double of it as the ball diameter. Example- If you set the scale at a measurement of 15 mm, you will get a ball size of diameter 30 mm. The scale calibration is provided both in Imperial as well as Metric standards..
  • Bearing Base for a Smooth Rotation of the Cutting Arm through the handle..
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

  • Small hole capacity: minimum of .430''. TCMT inserts.
  • Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
  • Bar is made of heat treated, precision ground alloy steel.
  • 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
  • 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check Stock

POPLOCK 17-inch Indexing Pry Bar Nail Puller/Adjustable Cats Paw Deck Wrecker / 11-Position/Pry Bars Nail Remover/Prybar/Trim Pullers for Baseboard/Nail Pulling/Floor Removal/Demolition

  • Indexing Pry Bar Nail Puller - Index Pry Bars Nail Puller with new head adjustable design. Flat sharpening edge prybar with opposite slide curved angle on Prying ends for carpenter fast wrecking.
  • Adjustable Cats Paw Deck Wrecker - Innovative Unique Adjustable Nail Puller PryBar Design with 2 sides push locking mechanism apply to Nail Puller wrecking bar. User use as cats claw extractor tool..
  • Indexable Pry Bar - Index Nail Puller Prybars with incremental angle 18 degrees allows user to choose up to 11 different angles for prying in difficult confined spaces and nail pulling..
  • Adjustable Nail Pulling Strength - Nail pulling torque exceeds US ANSI requirement (ASME B107.60-2004 ). Heavy duty gear design allow user to apply on deck wrecking , demolition , annihilator pry bars.
  • Nail Remover Extractor Pry Bar Tools Easy To Use - Extractores De Uñas Barra De Palanca, Hacer estallar las uñas en posiciones extrañas. hacer palanca en espacios confinados difíciles y tirar de clavos..
Check Stock