ReviewsIndexable Insert Holders

Carbide Tipped Woodturning Tools DW-9 Carbide Wood Lathe Tools 6pcs Hollower Rougher Detailer Finisher Sander Made of Stainless Steel and 3pcs aluminium alloy Handle and Carbide Cutters and Sandpapers

CNC machined 12mm solid stainless steel，Not easy to rust.
Indexable Replacement carbide insert design，Indexable give you fresh edge for maximum cutter life, And You can find matching carbide tipped insert(DW-9) in my Amazon store.
Replaceable Handle：Match 3pcs aluminum alloy handle.
Tool is designed with a square shaft making it easy to keep tools flat on the tool rest.
Total Length：22 Inches，Tool Length：10 Inches，Handle Length：14 Inches.

This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead..
Reduced noise and tear-out, produce much smoother finish on difficult woods..
The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead..
The indexable inserts allows you to rotate it if one knife edge is dull or nicked..
Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches.

Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300).
SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5).
SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5).
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
*** Insert kit Item#: 2387-2005INSERTS (Sold Separately on Amazon)***.

PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.

7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
*** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.

Smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
9pcs hex screw, Hexagon key and Aluminum fitting case..
*** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..

Replaceable Handle：Match 2pcs black aluminum alloy handle. Of course, you can also DIY the handle you like.
Material: aluminum alloy, STAINLESS STEEL, Tungsten Carbide.
Mid Size Tool Details: CNC machined from square STAINLESS STEEL, making them stronger, stiffer and less likely to roll than round shaft tools, Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life.
Easy to use: greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY.

★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).

if insert on the cutter: smallest diameter 20mm, biggest diameter: 31.16mm.
45 degree chamfer indexable mill cutter arbor SDMB26152 carbide inserts.
Package: 1pcs of milling cutter arbor, 1pcs of torx key, 1pcs of packing box (not include carbide insert).