ReviewsIndexable Inserts Shims

Indexable Carbide Insert Knife 14.3x14.3x2.0mm-50° 2-Edge Replacement Cutter for Cutech Tool Rikon Carbatec and Most Planer Jointer Helical Cutterheads, 10 Packs

  • Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
  • Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
  • Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
  • The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
  • What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

Accusize Industrial Tools Sclcr 4 Pc Indexable Boring Bar Set with 14 Carbide Cvd Coating Ccmt32.51 Inserts 1/2 5/8 3/4 1 P252-S416

  • SCLCR 4 Pc Indexable Boring Bar Set with 14 CCMT32.51 Inserts, 1/2, 5/8, 3/4, & 1".
  • Extreme Gloss Finish. Negative 5Degree End side cutting angle.
  • Utilizes 80Degree Diamond CCMT inserts. Bar hardness approx. 45HRC.
  • The insert is securely held with a torx screw to reduce tool slipping.
  • 1 each of 1/2'', 5/8", 3/4'' and 1" and CCMT 32.51 Carbide Black/Yellow Inserts.
Check Stock

WEN DB003E 3Piece 90° Square Shoulder Indexable Carbide End Mill Set with Aluminum Storage Case

  • Includes 3/8, 1/2, and 5/8-inch end mills with indexable APKT1003 Carbide inserts.
  • Protective aluminum case makes for easy storage and transportation.
  • Reversible Carbide inserts double the cutting lifespan of each bit.
  • Compatible with the WEN 33013 Metal milling machine and the WEN 33182A R8 collet set.
  • Universal design fits any collet set available on the market (required for operation).
Check Stock

Accusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412

  • Small hole capacity: minimum of .430''. TCMT inserts.
  • Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
  • Bar is made of heat treated, precision ground alloy steel.
  • 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
  • 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check Stock

GBJ MWLNR 1616H08 5/8\ Lathe Turning Holder + 10PCS WNMG431 Carbide Turning inserts, SER1212H16 SER 1/2\ External Threading Holder +10pcs 16ER 3/8\ AG60 Threading inserts

  • MTJNR 12-3C Right Hand Turning Tool Holder,3/4”Shank ,5” Length ,negative 3 degree lead angle..
  • Turning holder is made of HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Turning Holders use with TNMG, TNMA, or TNMM-32 style negative inserts.
  • MTJNR 12-3C Lathe Tool Holder,93 degree,clanping& Tool style for turning.
  • MTJNR 12-3C indexable tool holder for external contouring, profiling and facing from light roughing to finishing.
Check Stock

ASZLBYM 30PCS CNMG 432 + WNMG 432 + TNMG 332 Indexable Solid Carbide Turning Insert Cutting Blade, CNC Lathe Indexable Turning Insert Blade for Roughing of Stainless Steel and Cast Iron

  • Modle：10pcs CNMG 432 + 10pcs WNMG 432 + 10pcs TNMG 332 ..
  • Material: Carbide ，Coating : PVD，For processing ：finishing of steel..
  • The inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • Carbide inserts 30 pieces in 3 box, packed in plastic containers, safe and easy to store ..
  • Metal surface treatment, good wear resistance, good chemical stability . If you need a indexable turning tool holder that matches the inserts,search for ASIN:B07TTL32HW..
Check Stock

MABUARN 5/16 Shank Nickel Plated Turning Holders 7 Sets CNC Lathe Turning Tool Holders with Indexable Carbide Inserts for Turning Grooving Cutting Threading

  • Turning tool holders material: High speed steel.
  • 5/16" (8mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
  • Surface treatment: Nickel plated, quenching and hardening..
  • Model of 7 pieces turning tool holders: MGEHR0808-2, SER0808H11, SDNCN0808H07, SDJCR0808H07, SWLCR0808H04, SCLCR0808H06, SCLCL0808H06. Model of 7 pieces applicable inserts: MGMN200, 11ER AG60, DCMT070204, WCMT040208, CCMT060204.
  • Suitable for: CNC lathe external turning, threading, grooving, cutting, etc..
  • Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, 3 pieces keys, and 1 piece aluminum case..
Check Stock

OSCARBIDE 3/4\Self-Lock Block SLTBN19-5 with Adjustable Blade NCIH26-3,Blade NCIH26-4,Tin Coated 5 pcs GTN-3 Carbide Inserts and 5 pcs GTN-4 Inserts Parting Grooving Cut-Off Tool Set

  • Indexable Cutting Tool Holder Set include 1 pc 3/4" SLTBN19-5 Tool Block. 1 pc NCIH26-3 adjustable blade with 5 pcs GTN-3 carbide inserts. 1 pc NCIH26-4 with 5 pcs GTN-4 Inserts and 1 pcs wrench..
  • CTN-3 carbide inserts made of carbide Grade C6,0.12" width, TiN Coated. GTN-4 carbide inserts, made of Carbide Grade C6, 0.16" width, TiN Coated.
  • Suitable for varied Grooving,Cut-off,Parting-off,Chamfering.
  • This cut-off tool kit works with tool holders that can hold 3/4" AXA lathe turning bits,Equipped carbide inserts for Semi-finishing/roughing machining of steel and stainless steel.
Check Stock

with Extra 10 Gtn-2 Tin Coated Carbide Inserts

  • 1/2'' Shank Heavy Duty Indexable Grooving/Cut-Off Holder, Nickel Plated, with a Gtn-2 Tin Coated Carbide Insert, 2415-5024.
  • Gtn-2 Tin Coated Carbide Inserts, 10 Pcs/Box, 2403-2003x10.
Check Stock