ReviewsIndustrial Clamping Tools

0.3-3.2 Clamping Grinder Chuck Key M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..

Check Stock

Kreg K5 Pocket-Hole Jig

The new Kreg Jig K5 is packed with features your are sure to appreciate.
It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
The quick-release Drill Guide Block makes set up simple.
Front-mounted clamp handle makes clamping easy.
Ratcheting clamp mechanism adjusts without tools.
Quick-release pin holds drill block in place, and can't get lost.
Storage Wings provide built-in storage for bits, screws, accessories.
Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..

Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..

Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..

Check Stock

Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..

Check Stock

Royars Update 90 Degree Positioning Squares Right Angle Clamps for Woodworking,2 Pack（5.5 *5.5 ）Aluminium Alloy Corner Clamp Woodworking Carpenter Clamping Tool for Picture Frame Box Cabinets Drawers

【Super High Quality 90 degree clamps for woodworking】Our clamping square kit is processed by aluminum alloy and stainless steel, surface anodized....
【Best Use Effect of woodworking tools】There are seven holes on each side of our squares, which has stronger clamping force. This corner clamps for....
【Superb Details of woodpeckers tools】This 14cm carpentry right angle jig set have beveled edges, easy to handle and won't damage fragile cutting....
【Widely Use of woodworking clamps】This Royars woodpeckers tools for woodworking professional use to assemble and DIY by claping boxes, drawers,....
【Best Choice for Woodworking】:The actual use of professional woodworking work and sales volume shows that this size(140mm/5.5 inch )of clamping....

Check Stock

Quick Mount File Handle SH 220 for Needle Diamond and Small Files

ADD A LARGE HANDLE- To your files, reamers, hacksaw blades and other tang handled tools.
ONE HANDLE FOR MANY TOOLS- Attach to your uncomfortable tang-handled tools to tool handle to create a large maneuverable gripping surface.
POWERFUL HOLD- Steel parallel clamping jaws grip the entire length of the tang to prevent slipping and creates better tool control.
WOOD HANDLE- Won’t slip in your hand during use yet is comfortable and easy to control.
QUICK TOOL CHANGE- large, quick adjusting knurled knob ensures positive locking.
The General Tools and Instruments 890 File and Tool Handle adsd a large, maneuverable gripping surface to your uncomfortable tang-handled tools.
The steel clamping jaws grip the entire length of the tang for a powerful hold under heavy duty working conditions.
Additionally, the knurled adjusting knob provides positive locking and the effortless swapping of tools.
Use the rust proof handle to hold files, reamers, hacksaw blades.
At just over 1 inch around, it fits perfectly in the hand for comfortable and easy working.

Check Stock

Forward 8-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base HY-30808-8In (8")

Durable and Sturdy: high strength ductile Iron body (60,000 PSI) with best quality U-channel bar.
Rubber washers can prevent the handle from sliding and cancel noise.
Replaceable top machinist jaws and built-in pipe jaws are grooved tooth designed for enhanced grip and higher clamping force(5,500lbs).
More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety.
Tapping work can also be done on the large anvil of the bench vise.
Industrial Grade Vise: This 4" heavy-duty professional vise is suitable for use in the workshop, great for clamping and fixing workpieces.

Check Stock

Forward 6-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base HY-30606-6In (6")

Durable and Sturdy: high strength ductile Iron body (60,000PSI) with best quality U-channel bar.
Rubber washers can prevent the handle from sliding and cancel noise.
Replaceable top machinist jaws and built-in pipe jaws are grooved tooth designed for enhanced grip and higher clamping force(5,500lbs).
More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety.
Tapping work can also be done on the large anvil of the bench vise.
Industrial Grade Vise: This 4" heavy-duty professional vise is suitable for use in the workshop, great for clamping and fixing workpieces.

Check Stock

90 Degree Clamp Cabinet Clamp 5.5 x 5.5 14 x 14cm Aluminum Alloy Right Angle square Tool Corner Clamps for Woodworking Tools Right Angle Clamp Drawers Picture Frame 2pack

Our clamping square tools are machined from aluminum alloy and stainless steel, the surface is anodized, corrosion-resistant, not easy to fade, and....
This corner clamps for woodworking tools has two measurement units, metric and imperial. It is laser-engraved and the scale is on the front of the....
wood working tools and equipment show that this size set is a scientific and appropriate length size selection.It can work with a clamping tool to....
The actual use of professional wood working work and sales volume shows that this size (140mm/5.5 inch ) of clamping squares are a very scientific and....
Best choice for your box woodworking work. We provide a one-year warranty service and opened a 24-hour customer service hotline.It is a unique gift....

Check Stock

Wood Lathe Chuck 6 inch 4 Jaws Self-Centering Lathe Chucks Thread 1 x 8TPI Lathe Chuck for Woodturning

【EXCELLENT QUALITY】：The chuck is well-designed and made of high-quality steel. The sturdy chuck can stand high-intensity work.Durable wood Lathe chuck and have a greatly service life ..
【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.2-3.9inch (5-100mm). External Jaw Clamping Range: 3.8-5.3inch (98-135mm)..
【FREE ACCESSORIES】：We provide a set of installation tools for free . It can help you better install the chuck and processing on the lathe..
【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center with superior gripping force, the self-centering improves the flexibility of the chuck , can clamping most shaped workpieces..
【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock