ReviewsIndustrial Control Automation

PLC Controller, DC24V Programmable Logic Controller 4 Channel 100K Pulse 32bit MCU Industrial Control Board with Housing for FX1N-32MT, 16 Point Input 16 Transistor Output

  • ✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
  • ✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
  • ✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
  • ✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
  • ✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..
Check Stock

Siemens SIMATIC HMI KTP400 Basic Panel, Key/Touch Operation, 4\ TFT Display, PROFINET Interface for Automation Systems, Distributed Control Systems, Industrial Communication

  • Features: The ideal entry-level range for simple HMI applications | Engineered in the TIA Portal | Flexible scalability within the HMI range | High-resolution, dimmable wide-screen displays with 64.000 colors.
  • Touch/key functionality for intuitive operation | Interface for connection with various PLCs | Versions for PROFIBUS or PROFINET | Archiving via USB stick.
  • Configuration software: WinCC Basic (TIA Portal) V13 or higher | Messages: 1000 | Message classes: 32 | Process screens: 100 | Vector graphics: yes | Bar graphics: yes.
  • Curve diagrams: f(t) | Recipes: 50 | Archiving: yes | Resolution: 480 x 272 px | Control elements: Touch screen / 4 Function keys | Memory: 10 MB | Interface: 1 x RJ 45 Ethernet for PROFINET / 1 x USB host | Degree of protection: IP 65, NEMA 4x (front if mounted) / IP 20 rear | Installation cutout: 123 x 99 mm | Device depth: 43 mm.
  • Supply Scope: 1 unit of Siemens KTP400 SIMATIC HMI Basic Touch Panel, Instruction Manual | Applications: Automation systems, Distributed Control Systems, Industrial Communication, Industrial controls, Identification and Locating, Process Analytics, Industry software.
Check Stock

DORHEA 10PCS NRF24L01+ 2.4GHz RF Radio/Wireless Transceiver Module Compatible with Raspberry Pi

  • NRF24L01 is a single chip radio transceiver for 2.4 - 2.5 GHz ISM band, low operating voltage : 1.9 ~ 3.6V low voltage operation..
  • Built-in hardware CRC error detection, Multipoint communication address control, built-in 2.4Ghz antenna, add wireless capability to your projects..
  • 125 Communications channels frequency points, multi-point communication and frequency hopping to meet the communication needs..
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation. Compatible with Arduino and Raspberry Pi..
  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications, for easy implementation into designs without additional hardware..
Check Stock

5pcs/lot 30CPQ150 Schottky Rectifier diode TO-247 150V

  • 【Type No.】: MBR40100PT Schottky diode, other models in the same series are MBR40150PT/MBR40200PT, etc..
  • 【Chip】: High-quality large chip, high-precision integrated test line to monitor electrical parameters.
  • 【Features】: Laser printing is not easy to fade, oxygen-free copper pins have good conductivity.
  • 【Package】: 5pcs packed by exquisite environmentally friendly boxes or bags, which can not only reduce damage during transportation, but also be recycled and reused.
  • 【Applications】: Switching power supply, LED lights, integrated circuit, mobile communications, computers, industrial automation control equipment, automotive electronics , LCD television, IoT , smart home , medical equipment , cooker and other small appliances..
Check Stock

uxcell 150Pcs SV5.5-5 Insulated Fork Spade U-Type Wire Connector Electrical Crimp Terminal 12-10AWG Yellow

  • 【FEATURE】- When the insulated terminals are closely spaced from each other, it can improve the safety of insulation, prevent the bifurcation of the wires, and make it easier to insert the wires into the plug..
  • 【ADVANTAGE 1】- The Copper Crimp Connector's shell is made of PVC, with insulation and flame retardant, high safety and good protection performance.
  • 【ADVANTAGE 2】- Electrical Crimp Connector's Pin made of metal, tight contact and good conductivity.
  • 【APPLICATION】-Insulated fork terminals widely applied in electric and electronic industry, electric equipment, Industrial automation, street lighting and power control system in traffic and transportation, posts and telecommunication, petrol chemical industry, industrial building machine-building, etc..
Check Stock

Power Supply Supplier Box, Power Supply Box Direct Control Access Controller Lock for Office for Home

  • Material: High‑quality aluminum alloy material is corrosion‑resistant, wear‑resistant and durable with good heat dissipation..
  • Cooling Hole Design: The heat dissipation hole design of perforated mesh is combined with aluminum alloy to resist high temperature..
  • Input Voltage: AC 100-264V. Output Voltage: DC 12V. Output Current: 1.25A. Error Range: ±1%. Adjustable Pressure Range: ±5%. Power: 15W Maximum. Waterof Rating: IP20. Product Size: Approx. 70x40x33mm / 2.8x1.6x1.3in..
  • Purpose: Industrial automation, PLC control cabinet, DC motor, medical equipment, access control display system, monitoring equipment, light box advertising, LED equipment.
  • Stable Output Performance: Optimized components to ensure stable performance and long service life. Adopting EMI filter circuit, switching power supply is anti‑interference and its output is more stable..
Check Stock

DIGI XBP9B-DMSTB002 RF TXRX Module, XBee-PRO 900HP (S3B) DigiMesh, 900MHz, 250mW, RPSMA, 200Kbps, 32K Programmable

  • Application: Home security alarm and remote keyless entry; Smart home and industrial sensors; Wireless alarm security system; Building automation solutions; Wireless industrial-grade remote control; Health care products; Advanced Meter Reading Architecture(AMI); Automotive industry applications..
  • Technical manual support: http://www.ebyte.com/en/product-view-news.aspx?id=437.
  • Features: Communication distance tested is up to 7km; Maximum transmission power of 160mW, software multi-level adjustable; Support the global license-free ISM 868/915MHz band. Support air date rate of 0.018-62.5kbps in the LoRaTM mode; Support 300kpbs in the FSK mode.
  • Compatible with the transceiver of SX1278/SX1276.
  • With large capacity, FIFO supports 256Byte data cache..
  • New SF5 spreading factor to support dense networks.
  • Support 2.5V~3.7V power supply, more than 3.3V power supply can guarantee the best performance.
  • Industrial grade standard design, support -40 ~ 85 °C for working over a long time.
  • IPEX and stamp hole are optional, which is convenient for secondary development and integration..
Check Stock

DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino

  • Using Potentiometer 105, output timing is from 0.5S to 200S.
  • Widely used in:Security Products,human body sensors toys,human body sensor lighting industrial automation and control, etc.
  • NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself.
  • Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell).
  • Package Included: 5 X HC-SR501 PIR Infared Sensor.
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

6A

  • Rated Current 6A/10A/20A/30A/40A/50A/100A(Optional).
  • Compact size, easy to install with stud connection.
  • Widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc..
  • If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

GE Enbrighten Add-On Switch for GE Z-Wave/GE Zigbee Smart Lighting Controls, Works with Alexa, Google Assistant, NOT A STANDALONE SWITCH, Toggle, 12728

  • ...e of your favorite smart-device functions from multiple locations..
  • ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch..
  • Requires a GE Home Automation Switch. This is NOT a standalone switch. (This product is an add-on only switch, and requires an existing GE Home Automation Switch to function. Without a GE Home Automation Switch, the Add-On Switch WILL NOT OPERATE.).
  • MULTI-SWITCH OPERATION – Easily replace any in-wall control in a multi-switch configuration to support the features of the primary smart device to which it is connected. Up to four add-on switches can be added to a smart switch or dimmer to operate fixtures from as many as five locations..
  • COMPATIBLE DEVICES – The add-on switch mirrors the functions of the primary smart device. It offers ON/OFF control when paired with a switch, dims when connected to a dimmer, adjusts speed when used with a fan control and many ....
Check Stock