ReviewsIndustrial Din Rail

10Pcs DIN Rail Mounted Ground Circuit Connection Terminal Block Screw Clamp Connector (USLKG5N)

• Type: USLKG2. 5N, Rated voltage/current: 690V/34A..
• ✯ Material: Nylon PA66 Housing + Alloy Copper Bodies + Nickel-plated Screws..
• ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
• ✯ Lock firmly on the din rail, easy to insert the wire and the screw terminal holds the wires solid. Great use when making a prewired harness..
• ✯ Application: Distribution boxes/cabinets and other general terminals, such as: home appliances, electronic circuits, machines, etc..

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

• The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
• CAN industrial automation control system.
• The serial communication device is connected to CAN-bus.

Lantronix PXN210002-01U PremierWave XN Device Server 4 Port 10Mb/100Mb LAN, RS-232, USB 2.0, 802.11 b/a/g/n

• Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network. Dimensions: 3.54"H x 1.4"W x 2.4"D..
• High-impact plastic for durability. Media type supported: Twisted pair..
• Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits. Interfaces/ports: Network (RJ-45), RS-232/422/485 serial..
• Form factor: DIN rail-mountable. Connector type: Terminal block (screw)..

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

• Rate Voltage:220V 230V 240V Rate Current:30(100A).
• 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
• Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
• Accuracy Class:Class 1 Starting Current:0.4%lb.
• 35mm standard DIN rail installation,complying with standard DIN EN5002.

4G LTE-A Cat16 Pro Unlocked Dual-Band OpenWRT Sim Card Router with 5X Carrier Aggregation - Plug and Play Connection on AT&T T-Mobile & Verizon

• 【High-Speed 5G Network& Dual SIM Cards】 The industrial 5G router is powered by Qualcomm Quad-Core processor and dual 5G SIM cards(Mini SIM-2FF)....
• 【Strong Wi-Fi Performance】LINOVISION 5G router supports strong Wi-Fi performance with 2 x 2 MIMO 802.11ac Wi-Fi, the peak speed up to 1.733 Gbps.....
• 【RS232/RS485 IoT Integration】Featuring with 1xRS232, 1xRS485, 1x DI, 1xDO for IoT integration, IOT-R75W is not only an intelligent industrial IoT....
• 【Remote Management】DeviceHub offers easy and quick device management and configuration in bulk to 5G industrial cellular router, which greatly....
• 【Industrial Design】This versatile 5G cellular router with rugged enclosure supports Desktop, Wall or DIN Rail Mounting. Supports wide voltage....

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

• ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
• DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
• FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
• Access a serial device from anywhere with an IP-based connection.
• Mount on DIN-rails or on a wall with the attached mounting brackets.
• Suitable for hash environments with a rugged, aluminum enclosure.
• Configure via web browser or Virtual Com software interface.
• Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.

50 Amp 4 Pole Contactor Normally Open (N/O) 120V Coil, 32A Motor, IEC 63A, 60A DIN

• Normally Open (N.O.) main contacts Power status indicator.
• 110/120VAC Coil: 52VA inrush, 10VA sealed.
• Overall Size(Approx.) : 60 x 55 x 67mm / 2.4" x 2.2" x 2.7"(L*W*T).
• DIN rail included, Compliance: CE, and IEC/EN61095 DIN.

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

• DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
• High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..

TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102

• ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
• POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
• DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
• EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
• REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
• GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
• SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).

120VAC Din Rail Mounted Motor Contactor (100-C09D10)

• Rated for 9A. Used only with Rockwell 193-T1A System Overloads..

Rollon TEX45-1520 X-Rail 45, 1520mm Length