ReviewsIndustrial Ethernet

Tripp Lite Industrial CAT6 Ethernet Cable, Outdoor Rated UTP Network Patch Cable, 100W PoE, CMR-LP, IP68 Rated, Blue, 33 ft. (N200P-033BL-IND)

33 FT: Deliver power to PoE devices, and distribute data, voice and video at higher speeds and quality with Tripp Lite’s Category 6a 10G Ethernet industrial patch cable. Ideal solution for connecting gigabit ethernet networks or digital signage in factories, warehouses, recycling plants, machine shops and other dusty environments. Length: 33 ft. / Color: Blue / Connectors: RJ45 Male.
OUTDOOR RATED: Industrial ethernet cable with IP68-rating means the Cat6 cable is 100% protected against dust, and able to endure immersion in 1. 5 meters of water for up to 60 minutes with no damage or decline in performance. Ideal to provide Cat6 connectivity in outdoor environments susceptible to rain, such as a stadium or outdoor arena and other areas where protection from harsh elements is essential..
INCREASED POWER: CMR-LP certified cable provides a simple way to prepare installations for increased power levels without having to worry about issues caused by excessive heat. UL's Limited Power (LP) certification indicates the N200P-033BL-IND has been evaluated to handle the marked current under installation scenarios without exceeding the temperature rating of the cable..
BLUE CAT6 100W CABLE: Because this Cat6 patch cable supports High-Power 100W PoE (71W ....

Check Stock

MokerLink 5 Port Gigabit Industrial DIN-Rail Ethernet Switch, 14Gbps Switching Capacity, IP40 Rated Network Switch (-40 to 185°F), with UL Power Supply

This network switch include 4 gigabit ethernet ports and 1 gigabit uplink, all ports support 10/100/1000Mbps rate, switching capacity up to 14Gbps, with better data performance.
The shell is made of industrial-grade aluminum alloy, which is more sturdy, surface groove design, better heat dissipation, integrated DIN-rail mount kit, installation and disassembly are very simple.
IP40 protection grade, working temperature -40~75°C(-40~185°F), super robustness, anti-lightning, anti-static and anti-overload protection, adapt to various harsh environments.
Dual power supply, automatic fault switching, anti-reverse connection does not damage the equipment, higher reliability, equipped with one UL-certified power adapter, can be used without additional purchase.
Support auto-negotiation, plug and play, no configuration needed, low-power consumption CPU, no fan quiet operation, green energy saving, suitable for various networks, such as home office, computer room, warehouse, factory, compact control box and other industrial scenarios with Ethernet access.

Check Stock

WIWAV WDH-8GT-DC 10/100/1000Mbps Unmanaged 8-Port Gigabit Industrial Ethernet Switches with DIN Rail/Wall-Mount UL Listed Fanless -30°C~75°C

COMPACT DESIGN - Industrial grade 8-port Gigabit ethernet switch with 10/100/1000Mbps automatic MDI/MDI-X crossover for plug-and-play..
LOW POWER CONSUMPTION - Energy-Efficient Ethernet（Power Consumption .
FAST DATA TRANSMISSION - Each port supports both 10/100/1000Mbps speed auto negotiation, Supports IEEE 802.3, 802.3u, 802.3x standard..
ROBUST AND RELIABLE - Can be used in extreme industrial environments, supports a wide range of operating temperatures -30°C ~ +75°C (-22F ~ 167F). Easy to use and DIN rail mountable with built-in bracket, Robust IP30-rated housing..
SAFETY & ENVIRONMENTAL CERTIFICATION - WDH-8GT-DC has passed UL, cUL, CE, FCC, PSE, REACH (SVHC) and RoHS certifications. Low Power Consumption, Overload, Reverse connect protection. Safe and quality-reliable, so there’s no worries about damaging functional devices..

Check Stock

WIWAV WDH-16GT-DC 10/100/1000Mbps Unmanaged 16-Port Gigabit Industrial Ethernet Switches with DIN Rail/Wall-Mount UL Listed Fanless -30°C~75°C

COMPACT DESIGN - Industrial grade 16-port ethernet switch with 10/100/1000Mbps automatic MDI/MDI-X crossover for plug-and-play..
LOW POWER CONSUMPTION - Energy-Efficient Ethernet（Power Consumption .
FAST DATA TRANSMISSION - Each port supports both 10/100/1000Mbps speed auto negotiation, Supports IEEE 802.3, 802.3u, 802.3x standard..
ROBUST AND RELIABLE - Can be used in extreme industrial environments, supports a wide range of operating temperatures -30°C ~ +75°C (-22F ~ 167F). Easy to use and DIN rail mountable with built-in bracket, Robust IP30-rated housing..
SAFETY & ENVIRONMENTAL CERTIFICATION - WDH-16GT-DC has passed UL, cUL, CE, FCC, PSE, REACH (SVHC) and RoHS certifications. Low Power Consumption, Overload, Reverse connect protection. Safe and quality-reliable, so there’s no worries about damaging functional devices..

Check Stock

Tripp Lite Industrial 16 Port Ethernet Network Switch 10/100/1000 Mbps -40° to 167°F Unmanaged TAA Compliant DIN Mount (NGI-U16)

16-PORT UNMANAGED GIGABIT ETHERNET SWITCH: Sixteen auto-negotiating 10/100/1000 Mbps ports send data via Cat5e/6/6a copper Ethernet cable. Supports browser-based operation and works independently from the connected computer's operating system. Preferred browsers include Google Chrome (Windows & macOS) and Microsoft Edge (Windows only)..
MONITORS AND CONTROLS DEVICES: MAC address auto-learning and auto-aging for efficient routing, and automatic MDI/MDI-X crossover detection for plug-and-play functionality. IEEE 802.3x flow control allows transmission of large files..
INDUSTRIAL METAL HOUSING: IP30 industrial-grade aluminum case withstands vibration, shock and free fall. It can also operate in extreme temperatures ranging from -40 to 75° Celsius (-40 to 167° F). Includes pre-installed DIN mounted rail clip..
TAA-COMPLIANT FOR GOVERNMENT PURCHASES: Compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..
RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 3-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email..

Check Stock

VONETS VAP11G-300 WiFi Bridge 2.4GHz WiFi to Ethernet Convert/WiFi Repeater/Point to Point with RJ45 Male DC/USB Powered for PLC IP Camera Printer Medical Devices Network Devices

【2.4GHz WiFi Bridge/Repeater】Industrial 2.4GHz Mini WiFi Bridge/Repeater, can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi or WiFi to Ethernet convert).
【Support Multiple application】1. WiFi repeater, 2. WiFi bridge ( IP layer or MAC layer transparent transmission), 3. WiFi-AP hotspots. Realize WiFi smart bridge function, WiFi to wired, wired to WiFi, smart exchange..
【Point-to-Point Transmission】Maximum can be up to 100 meters when without obstacles and small data, less than 50 meters when used for video transmission, 2 X 1.5dBi internal antennas. It's a good partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, industrial PLC, PS3, network Printer, robot, doll machine, and more network applications..
【Configuration Parameters】Support wide voltage DC 5V-15V(Typical 5V/1A, ripple less than 100mV), the average power consumption is less than 2.5W. Equipped with a 30cm power cable, one male DC port, one male USB port, one female DC port of the parallel connection, and one 10/100Mbps adaptive Ethernet port..
【IP/MAC Layer Transparent】Support IP layer transparent transmission and MAC layer transparent transmission in t....

Check Stock

Arduino Portenta H7 [ABX00042]

Two processors that can run tasks in parallel with both cores communicating with one another. Each core can execute Arduino, mbedOS, micropython, and TensorFlow Lite code..
Comes in the Arduino MKR form factor but includes two extra 80-pin high density connectors. Extend your Portenta H7 to physical interfaces like Ethernet connectors, CAN bus peripherals, extra GPIO pins, SD card, etc..
Onboard WiFi and Bluetooth connectivity up to 65 Mbps transfer rate (using an external antenna)..
Perfect for high-end industrial machinery, laboratory equipment, computer vision, PLCs, robotics controllers, or even dedicated stationary computers..
Main features: industrial temperature rates, 8MB SDRAM, 16MB NOR Flash, DisplayPort output, USBC connector, cryptochip for secure data transactions..

Check Stock

VONETS Mini Industrial WiFi Bridge Ethernet/Repeater/WiFi to Wired/WiFi Hotspot Extender Signal Booster 2.4GHz 300Mbps for IP Printer,DVR VAP11G-300 with 5V/2A USB Wall Charger Adapter

Industrial Mini 2.4GHz WiFi Bridge/Repeater (Small size).
Can achieve WiFi to Wired or Wired to WiFi function (Ethernet to WiFi or WiFi to Ethernet convert).
Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male RJ45 port)..
Support wide voltage DC5V-15V(Typical 5V/1A, ripple less than 100mV), the average power consumption is less than 2.5W.
with 1 *5V/2A USB wall charger power adapter.
USB/DC optional powered Mode, one 30cm power cable with 1 male DC port and 1 male USB port, one female DC port of parallel connection..
WiFi Tx Power:14.5dBm/16dBm optional (Enhanced Power), 2 X 1.5dBi built-in antennas.
Point-to-point transmission distance: maximum can be up to 80 meters when without obstacle and small data, then less than 50 meters when used for video transmission.
Good Partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission,industrial PLC,PS3,network Printer, robot, doll machine and more Network application..
Support three kinds of application methods: WiFi repeater, WiFi bridge ( IP layer or MAC layer transparent....

Check Stock

VONETS VAP11AC 2.4GHz+5GHz Dual Band AC1200 Mini Wireless Bridge Repeater Wi-Fi Signal Booster WiFi to RJ45 Ethernet High Power WiFi Hotspot Extender Amplifier and 5V/2A USB Power Supply Included

Industrial Mini Wireless Bridge/Repeater/WiFi Ethernet Adapter 2.4GHz: 300mbps + 5GHz: 900Mbps(small size).
it supports WiFi to Wired or Wired to WiFi function.
Support WiFi 802.11ac/a/b/g/n, One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male RJ45 port)..
Powered by wide voltage DC5V-15V(Typical 5V/2A, ripple less than 100mV is recommended), 5V/2A USB power supply is included, support two-stage automatic overvoltage protection. One 30cm power cable with 1 female DC port and 1 male USB port..
Good Partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, industrial PLC, PS3, network Printer, robot, doll machine and more Network Devices and applications with WiFi or RJ45 Ethernet port.
WiFi Tx Power: 2.4GHz: 14.5dBm, 5GHz:21dBm-23dBm optional.
Point-to-point transmission distance: maximum can be up to 200 meters when without obstacle and small data by 802.11A protocol, then less than 100 meters when used for video transmission.
Support three kinds of application methods: WiFi Repeater, WiFi Bridge ( IP layer or MAC layer transparent transmission), WiFi AP hotspots.One year warranty,Video User Guide:https://youtu.be/y9AIiyGwgjk, Any questions just feel free to contact us: [email protected]....

Check Stock

Tripp Lite Industrial 8 Port Ethernet Network Switch 10/100 Mbps -40° to 167°F Temperature Range Unmanaged TAA Compliant DIN Mount (NGI-U08C2)

...browsers include Google Chrome (Windows & macOS) and Microsoft Edge (Windows only)..
MONITORS AND CONTROLS DEVICES: MAC address auto-learning and auto-aging for efficient routing, and automatic MDI/MDI-X crossover detection for plug-and-play functionality. IEEE 802.3x flow control allows transmission of large files..
INDUSTRIAL METAL HOUSING: IP30 industrial-grade aluminum case withstands vibration, shock and free fall. It can also operate in extreme temperatures ranging from -40 to 75° Celsius (-40 to 167° F). Includes pre-installed DIN mounted rail clip..
TAA-COMPLIANT FOR GOVERNMENT PURCHASES: Compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..
RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 3-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email..

Check Stock

Vonets VAP11G-500S Industrial 2.4GHz Mini WiFi Bridge/Wireless Repeater/Router/Ethernet to WiFi Adapter for Industrial Application, PLC, Printer, Medical, Network Equipment

✅【Industrial WiFi Bridge/Mini Router】High Power Industrial Mini 2.4GHz WiFi Bridge/Router/Repeater/Wireless Access Point/WiFi to Ethernet RJ45, can achieve WiFi to Wired or Wired to WiFi function..
✅【Configuration and parameters】WiFi rate. 300Mbps, WiFi transmit power: 19dBm/23dBm selectable, point to point transmission distance: more than 100m when there are no obstacles and small data transmission, less than 100m when used for video transmission..
✅【Power & Accessories】Powered by wide voltage DC5V-24V(Typical 5V/2A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 27V), USB or DC optional powered mode.
1 Fixing Kit and 1 Industrial DC connector, more suitable for industrial applications..
✅【Specifications & Application】The card size occupies a small space, is easy to carry, and has industrial integration. Good Partner for security system, DVR, IP camera, Medical devices, IoT devices, Video transmission, Industrial PLC, PS3, Network Printer, Robot, Doll Machine, and most WiFi network applications..

Check Stock