ReviewsIndustrial Fluids

5 Pack 20ml Syringe Large Plastic Syringe for Scientific Labs Dispensing Measuring Watering Refilling Multiple Uses

【Individually Wrapped】 Every syringe is individually sealed, clean, Great for refilling and measuring essential oil, science lab, industrial,....
【Widely Application】These syringes are suit measuring and dispensing fluids, suit for lab use and experiments, sample preparation, and can be used....
【Easy to Observe】 The corresponding calibration is engraved on the syringe tube to facilitate users to view or measure the residual amount of the....
【PACKAGE CONTENTS】: Including 5 pcs 20 ml/cc plastic syringes, 5 pcs syringe caps.
【Note】These syringes are only for industrial use..

Check Stock

Frienda 4 Pack Large Plastic Syringe for Scientific Labs and Dispensing Multiple Uses Measuring Syringe Tools (10 ml)

Suit for: polypropylene barrel plunger for measuring and dispensing fluids, suit for lab use and experiments.
Sterile wrapped: every syringe is individually sealed, clean, safe and sterile, good for essential oil, science lab, industrial, applications of inks, perfume, lubricants, sealants, etc..
Wide usage: these sterile syringes are suit for refilling, measuring, garden watering and essential oil separator, etc..
Package included: come with 4 pack measuring syringe in this package, enough for use or replacement.
Warm note: the syringes are for industrial use only.

Check Stock

4 Packs Plastic Syringe with Measurement Oral Liquids Measuring Syringes Without Needle for Medicine Resin Epoxy Dispensing Watering Refilling

Suit for: polypropylene barrel plunger for measuring and dispensing fluids, suit for lab use and experiments.
Sterile wrapped: every syringe is individually sealed, clean, safe and sterile, good for essential oil, science lab, industrial, applications of inks,....
Wide usage: these sterile syringes are suit for refilling, measuring, garden watering and essential oil separator, etc..
Package included: come with 4 pack measuring syringe in this package, enough for use or replacement.
Warm note: the syringes are for industrial use only.

Check Stock

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..

Check Stock

12 Pack 1ml Plastic Syringe - Individually Sealed Syringe for Scientific Labs, Feeding Pets, Plant Hydroponic, Oil or Glue Applicator (12 PACK)

12 pack 1ml 1cc plastic syringes without needle, suitable for measuring and dispensing fluids.
These measuring syringes good for liquid flavors, essential oil, science lab, industrial, applications of inks, perfume, lubricants, sealants, etc..
The 1ml syringe with measurement is in proper size for giving liquid medication & oral med to your dog, cat, bird and other smaller pets..
These syringes are individually packed in a sealed bag.

Check Stock

Industrial Precision Luer Lock Tip Applicator, 20 mL Syringe, Non-Sterile, Dispense Adhesives, Oil, Lubricants, Sealants, Alcohol, Includes 6 Syringes and 6 Nozzles with Caps, by Tech Team

20 mL polypropylene syringes with secure Luer Lock applicator nozzles and caps for drop by drop application of oils, lubricants, adhesives, inks, paint, perfume, flux, and essential oils. Each syringe has a clearly marked ml scale for accurate measurement of fluids which makes it ideal for measuring additives for 2 cycle engine fuel mixes..
Each applicator nozzle comes sealed with a break-away cap on the end. Simply break the cap off, reverse it and use it to seal the end of the applicator tube. The applicator tube connects to the syringe body with a secure Luer Lock twist-on connection..
The syringes feature a polypropylene body and plunger with a vinyl seal. Using volatile solvents and corrosive chemicals such as, but not limited to, lacquer thinner and acetone should be avoided, and a 24-hour compatibility test is advised for any fluids that fit this category. Appropriate safety gear such as gloves and eye protection should be used at all times..
These syringes are NON-STERILE and are intended for industrial and hobby use. The ability of the syringe to work easily is directly dependent on the viscosity of the fluid. Thin fluids work well, thick ones can become problematic..
The set includes six (6) syringes and six (6) nozzles with break-away caps..

Check Stock

Shintop 10pcs 5ml Syringe with 18Ga 1.5 Inches Blunt Tip Needles for Experiments, Industrial Use

Syringe Measurement Range: 5 ML, Non-Sterile blunt tip needles is not for injection, industrial use only.
Polypropylene Barrel/Plunger, For measuring and dispensing fluids/chemicals, lab use and experiments.
Also great for essential oil, science lab, flat back rhinestones, hobby crafts, home or industrial precison applications of CA glues, inks, perfume, lubricants, sealants etc.
Syringe calibrations are large and easy to read, easy see through for accuracy, 18 Gauge stainless steel blunt tip needle large and long enough for most use case.
Package included 10pcs 5ml syringe, 10pcs 18G 1.5" Blunt Tip Needles, all pack in a pouch bag, With 100% money back guarantee.

Check Stock

Floor Squeegee Scrubber 55inch Long Stainless Steel Handle with 22inch Wide Silicon Rubber Blade - Perfect Squeegee Broom for Floor Washing and Drying Shower Glass, Marble, Wood Surfaces

...moving large fluids on Wood, Tile, Porcelain and many more. The floor squeegie water broom blade has extensive drying efficiency that will dry the floor as well as remove dirt and hair.
Screw Locking Bolt: Tighten the screw to give the stainless steel rod a sturdy and durable grip for garage squeegee concrete floor..
Industrial Features: Made of Stainless Steel this large double floor squeegee allows for moving fluids smoothly with precision. It also has a hanging hole for storage when done. It's normal for the floor squeegee to not gather all the water while pushing, just give it 10 seconds and it will rapid dry. The commercial floor squeegee heavy duty works well with any project..

Check Stock

Dixon DCB20 Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, 1/4\ Coupling x 1/4\ NPT Female

Air Chief industrial interchange quick connect coupler for connecting directly with a hose with a female NPT end to connect with a male NPT threaded connection.
Air Chief Industrial interchange quick connect coupler with a female NPT threaded end.
Valved construction automatically shuts off flow when coupler is disconnected..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).

Check Stock

Versachem 44209-12PK 4-Minute Steel Epoxy - 2 oz Pack of 12

Fast-setting, industrial strength epoxy, excellent for bonding metal to metal.
Repairs defects in metal, wood and masonry.
Can be drilled, tapped, sanded, filed or painted once fully cured.
Non-flammable formula, resistant to water and most automotive fluids.

Check Stock

Dixon DC20S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, 1/4\ Coupling x 1/4\ NPT Female

Air Chief industrial interchange quick connect coupler for connecting directly with a hose with a female NPT end to connect with a male NPT threaded connection.
Air Chief Industrial interchange quick connect coupler with a female NPT threaded end.
Valved construction automatically shuts off flow when coupler is disconnected..
Stainless steel 303 for better machining characteristics than stainless steel 316.
Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).

Check Stock