ReviewsIndustrial Grade Welding Clamp

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Lincoln Electric womens Jessi Combs Women s MIG Stick Welding Gloves Black Red Medium Pack of 1 US

  • Sized for women's / children's hands and intended for use in Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW) or other high....
  • GREAT HEAT RESISTANCE – Made of a high grade leather and soft cotton liner which is designed to withstand and protect against high temperatures..
  • INDUSTRIAL DURABILITY – The glove design features a high grade leather exterior, kevlar threading, leather reinforced stress points and a fully....
  • SUPERIOR COMFORT – The soft cotton hand liner and straight thumb design enhances comfort and fingertip sensitivity. The inside cuff is lined with a....
  • USED BY PROFESSIONALS – This glove model is used by professional fabricators on a daily basis..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-160A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Amazon Basics Locking Pliers - Welding Clamp 9-inch

  • 9-inch locking pliers and welding clamp tool for welding applications and securing holding awkwardly shaped items.
  • Includes (1) 9-inch locking pliers and welding clamp tool made of alloy steel with a rust-resistant nickel-plated finish.
  • U-shaped jaws offer better visibility and more space to work.
  • Screw-adjustable locking mechanism ensures ultimate locking force.
  • Classic trigger release quickly and effortlessly unlocks the tool.
Check Stock

4 Inch Heavy Duty Malleable C Clamps for Woodworking Welding Automotive Carpentry Building 4 Pack

  • 4 Inch C Clamp: Use this set of 4 c clamps for woodworking, metal work, welding, automotive, or furniture manufacturing.
  • Multi-Use: The welding face clamp has a sliding handle that will help reduce hand fatigue while ensuring a strong, secure hold on any wood and metals.
  • Clamping Range: Our c clamp set features a screw and thread design that allows you to freely control the clamping range to your needs.
  • Dimensions: Each 4 inch c clamp measures 8 x 4 x 0.6 inches in length.
  • Reliable Quality: The black c clamps for metal working are made from malleable iron that won’t easily break after long-term use.
Check Stock

WORTHINGTON CYLINDER 332585 14.1 oz Pre-Filled MAP-Pro Gas Torch Style Cylinder

  • Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop..
  • The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill..
  • Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter..
  • No Costly Fees - In the long run, our welding tank is low cost to own compared to the high leasing fees you'll find at your local welding supply. No deposits to put down, and you won't be locked in to the same store for refills..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your Argon CO2 welding gas tank, simply reach out to Customer Support and we'll make things right for you!.
Check Stock