ReviewsIndustrial Iot Board

SunFounder 3 in 1 IoT/Smart Car/Learning Ultimate Starter Kit Compatible with Arduino IDE, Scratch, Online Tutorials, 192 Items, 87 Projects, Including Controller Board Compatible with Arduino UNO

  • 【3 in 1 Kit】This is the most comprehensive kit for learning Arduino, Smart Car, and IoT. 3 in 1 Kit comes with 87 projects and 192 items. (Includes ESP8266 and controller board compatible with Arduino UNO.).
  • 【Learning Kit】The SunFounder 3 in 1 Ultimate Starter Kit is compatible with both Arduino IDE and Scratch, making it suitable for both beginners and experienced software engineers..
  • 【Smart Car】With this kit, you can learn how to build and program a multi-functional smart car. It includes features such as Line Tracking, Obstacle Avoidance, Remote Control and so on..
  • 【Learn Internet of Things】You can learn how to design code and build IoT products with ESP8266, such as plant monitoring, door and window detection, etc..
  • 【Online Tutorials】The online tutorials contains 87 projects: 39 projects for learning Arduino, 11 car projects, 8 IoT projects, and 29 Scratch projects..
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

Nelawya 5.8 dBi LoRa Antenna 915Mhz Outdoor Omni-Directional Antenna with 10ft Ultra Low Loss KMR200 Cable for Nebra RAK V2 MNTD Bobcat Sensecap M1 Helium HNT Hotsport Miner, Black

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor.
  • Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
Check Stock

DC 24V PLC Control Programmable Logic Controller FX1N-24MR Industrial Control Board 14 Input 10 Output 24V 5A PLC Transistor Output

  • High Performance: This PLC industrial control board can support connecting text screen and connecting touch screen, which is stable and reliable..
  • Premium Quality: This PLC industrial control board is made of high quality electric component, which has reliable quality and long service life..
  • Compact Size: This PLC industrial control board has a compact small size, which is portable and easy to operation..
  • Wide Application: This PLC industrial control board is mainly used in a variety of industrial automation control applications..
  • High Speed Input and Output: This PLC industrial control board is high speed 16 Input 16 Output..
Check Stock

Arduino MKR IoT Bundle [GKX00006]

  • Learn the basics behind the Internet of Things, build your own connected devices, and control your Arduino MKR 1000 board over the Internet..
  • With 5 step-by-step tutorials on Arduino’s online platform, includes all the components needed for those and more!.
  • Connect to the dashboard of Arduino’s IoT Cloud: log, graph and analyze sensor data, trigger events, and automate your home or business..
  • Display information locally using the LCD display, or activate mechanical devices with one of the two motors in the kit..
  • Power the board from the USB port, or using the included battery connector (battery not included)..
Check Stock

Vonets VAP11G-500S Industrial 2.4GHz Mini WiFi Bridge/Wireless Repeater/Router/Ethernet to WiFi Adapter for Industrial Application, PLC, Printer, Medical, Network Equipment

  • ✅【Industrial WiFi Bridge/Mini Router】High Power Industrial Mini 2.4GHz WiFi Bridge/Router/Repeater/Wireless Access Point/WiFi to Ethernet RJ45, can achieve WiFi to Wired or Wired to WiFi function..
  • ✅【Configuration and parameters】WiFi rate. 300Mbps, WiFi transmit power: 19dBm/23dBm selectable, point to point transmission distance: more than 100m when there are no obstacles and small data transmission, less than 100m when used for video transmission..
  • ✅【Power & Accessories】Powered by wide voltage DC5V-24V(Typical 5V/2A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 27V), USB or DC optional powered mode.
  • 1 Fixing Kit and 1 Industrial DC connector, more suitable for industrial applications..
  • ✅【Specifications & Application】The card size occupies a small space, is easy to carry, and has industrial integration. Good Partner for security system, DVR, IP camera, Medical devices, IoT devices, Video transmission, Industrial PLC, PS3, Network Printer, Robot, Doll Machine, and most WiFi network applications..
Check Stock

ESP32 CAM for Arduino Kits Monitor Snapshot Face Detection Recognition WiFi Bluetooth Camera Module with 128M SD Card USB to Serial Cable HC-SR501 Sound Sensor Compatible for Arduino IDE(Tutorial)

  • ...-in flash Camera and SD card slot is WIFI&Bluetooth 4.2 dual-mode development board,PCB on-board antennas and cores based on ESP32 chips.It used as master mode to build independent network controller,or as a slave to other hosts MCUs to add networking capabilities to existing devices.Suitable for home smart devices,industrial wireless control,wireless monitoring,QR wireless identification,wireless positioning system signals,and other IoT applications.
  • ✔️【USB to TTL serial PL2303TA 3.2-feet USB2.0 cable】:connects devices with 3.3 V logic level UART signals interface to computer via USB port.Provides access to UART Tx,Rx,5V,GND.Compatible with Windows 2008/XP/Vista/7/8/10(32,64-bit).【128M Micro SD Card】:Size: 0.59x 0.43x0.04 in.Capacity:128M. Read/Write Speed:18M/5M(s).Computer needs connect a Micro SD Adapter to recognize it.
  • ✔️【HC-SR501】:When someone approach human infrared PIR body sensor,output range High,when people leave,output Low.Not repeat/repeatable 2 trigger mode.Sensitivity and Time Delay is adjustable.Sensing Angle .
Check Stock

OSOYOO Robot Rc Smart Car DIY Kit to Build for Adults Teens with Servo Power Steering Motor, WiFi, Bluetooth, Code Programmable Compatible with Arduino UNO

  • ...t controls the axles to turn the wheels. This electric power steering system enables a highly automated driving experience that imitates real-world full-sized vehicles.
  • Do-it-yourself Starter Robot Car Building Kit: allows adults, teens, and all students to learn valuable skills, fully compatible with Arduino UNO R3 board, it will help you learn about electronic circuits, programming sensors and actuators, the Internet of Things (IoT), coding, electronics, mechanical engineering and hands-on experience in robotics.
  • Package includes all the technical modules, parts, and sensors you need to build a fully functional robotic car: such as MCU board for R3, OSOYOO motor shield, OSOYOO ESP8266 WIFI shield, HC Bluetooth module, line tracking module, ultrasonic sensor, micro servo motor, battery, and charger.
  • Multifunctional and features all the highly advanced intelligent features and driving modes that you expect for a robot car: which includes: auto-go, line tracking, ultrasonic avoidance, Wifi IOT control, Bluetooth App control, compatible with Android and Apple IOS devices via an app developed in house exclusively for OSOYOO.
  • Step-by-step instructions, videos, and tutorials will show you detailed instructions on installing your new robotic car, with easy-to-....
Check Stock

Vonets VAP11S-5G Mini WiFi Bridge Ethernet/Mini Repeater/WiFi Router/Industrial Signal Booster 5GHz with 2 RJ45 Ports/Antennas and USB/DC Powered for DVR Monitoring PLC Medical Device

  • ✅【Industrial WiFi Bridge/Router】Industrial Mini 5GHz WiFi Bridge/Wireless Bridge/Router.
  • Support WiFi 802.11a/n/ac protocol, 900Mbps WiFi rate.
  • Can realize WiFi to wired or wired to WiFi function.
  • ✅【Technical Parameters】WiFi Tx power: 19dBm/23dBm optional, 2 x 3dBi external antenna.
  • point-to-point transmission distance: up to 200 meters without obstacles and small data transmission (802.11a protocol), when used for video transmission Up to 20m to 100m.
  • ✅【Power Supply Mode】Wide voltage DC5-24V power supply (typical 5V/2A, ripple less than 100mV), two-level automatic overvoltage protection (protection voltage upper limit 27V), USB or DC female port optional power supply mode.
  • including 1 fixed Kit and 1 industrial DC connector, more suitable for industrial applications.
  • ✅【Industrial And Other Applications】It is good for WiFi network applications such as WiFi sports applications, surveillance, DVR, IP cameras, medical equipment, IoT devices, video transmission, industrial PLC, PS3, network printers, robots, AGV, doll machines etc.
  • ✅【Continuous Update Service】The software of our device is continuously optimized. You can upgrade the software version of the device online at any time to achieve the best function of the device.
Check Stock

ASUS SBC Tinker board RK3288 SoC 1.8GHz Quad Core CPU, 600MHz Mali-T764 GPU, 2GB

  • High performance QuadCore ARM SOC 1.8GHz with 2GB of RAM -The Tinker board features the Rockchip RK3288 Soc with Mali – T764 GPU and 2GB of Dual Channel DDR3 memory.
  • Non shared GBit LAN, Shielded Wi-Fi with upgradable antenna support – Tinker board features a high speed non shared GBit LAN port for improved performance along with integrated shielded Wi-Fi for robust IOT & network connectivity.
  • Highly compatible PCB & Topology –Leveraging industry standard PCB & topology dimensions along with IO and connection placement, Tinker board offer extensive compatibility with SBC accessories & chassis..
  • HD Audio & HD & UHD Video Support – Tinker board supports HD audio 192/24bit audio along with accelerated HD & UHD ( 4K ) video playback support* requires use of Rockchip video player in TinkerOS.
  • DIY Friendly Design – Tinkerboard features multiple DIY friendly use features including a color coded GPIO header, silkscreen PCB and color coded pull tabs.
Check Stock

Raspberry Pi Pico W

  • Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264kB internal RAM and support for up to 16MB of off-chip flash.
  • Network your Pico for a complete IoT solution..
  • Raspberry Pi Pico has undergone extensive compliance testing and meets a number of regional and international standards..
  • Raspberry Pi Pico W comes with a fully certified module on board featuring 2.4GHz 802.11n wireless LAN.
Check Stock