ReviewsIndustrial Router

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

CNC Spoilboard Surfacing Router Bits 1/2 inch Shank 2 inch Cutting Diameter Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool by BINSTAK Carbide

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTER BIT: Suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank Slab Flattening Router Bit Carbide Planer Router Bits Wood Milling Cutter Planing Tool Woodworking Tools by BINSTAK

  • 4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
  • HIGH QUALITY CNC ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE WOODWORKING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE: Suitable for woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
  • GIFT: Router Collet Reduction Sleeve Tool Bit. For turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Inner diameter: 6.35 MM. Outside diameter: 12.7 MM.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Cudy N300 WiFi Unlocked 4G LTE Modem Router with SIM Card Slot, 300Mbps WiFi, LTE Cat4, EC25-AFX Qualcomm Chipset, 5dBi High Gain Antennas, FDD, DDNS, VPN, Cloudflare, Plug and Play, LT400

  • ...ual to set APN). QX210 4G LTE router can share the 4G network with your electronic devices in places without broadband coverage anytime/anywhere. Its high-speed LTE CAT4 module support B2/4/5/12/13/17/B18/B25/26/41, covering most frequency bands of US (ex AT&T and T-Mobile), NOT FOR Verizon. It is unlocked..
  • 【Industrial Design & High-Reliability】: This VPN (client mode, NOT SERVER mode) router is a 4g router with sim card slot. Rugged metal casing, 3.74×2.75×0.98in compact size for mass deployment. Working Temperature -22 ℉ to 158 ℉ (-30 to 70℃), Working Voltage DC 7.5V to 32V. ESD and lightning protection, Watchdog, multi-layer link detection mechanisms, Wired WAN WiFi Cellular failover, automatic redial and recovery. It has a record that stays online for more than 425 days without breakdown in our clients' project environment..
  • 【Powerful Networking & Functions】: QX210 LTE modem provides Internet Access of Wired Ethernet, WiFi (802.11b/g/n, AP and Client), and Cellular (4G/3G), it is ideal to work as a main or backup internet. Support VPN client mode (GRE, PPTP, L2TP, IPSec, EOIP, N2N, OpenVPN), Qos, DMZ, Firewall, Port Forwards, NAT, Load Balancing, DDNS, SNMP, Serial RS232 DTU, Modbus RTU/TCP protocol. It is ideal for a variety ....
Check Stock

Yakamoz 1/2 Inch Shank Adjustable 3 Wing Slot Cutter Router Bit Set with 6-Picecs Slotting Cutters | 1/2 Inch Cutting Depth & 6 Different Cutting Widths

  • 100% New Brand Industrial Quality Router Bits For Router woodworking.
  • C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies with anti-kickback design..
  • Heat resistant Teflon coating to prevent building-up of sawdust, resin, and pitch..
  • Designed for desktop engraving machines and table-mounted router, it can not be used in electric drill & drill machines. Suitable for woods, mdf, particle board, plywood compact panel, avoid cutting ferrous metal and non wood materials, such as: Steel, iron, sand, etc.
  • Note: 1/2" Shank included ONLY! The holder of the blades cannot use as a 1/4 shank, it can not be used on router machines..
Check Stock

CNC Spoilboard Surfacing Router Bits,1/4 inch Shank 1inch Cutting Diameter plus 1/2 inch Shank 2inch Cutting Diameter , Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Perfectly forSurfacing, Rabbeting, Flycutter, Leveler, Surface Planer(Carbide) 2 pieces

  • [Product Specification]4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2″.
  • Cut Length: 1/2″ 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • Cut Length: 1/4” .Gift 1/2″to1/4″ Router Collet 1pcs.
  • [High quality materials]heat resistant teflon coating,Industrial grade micro grain carbide tips,High-quality alloy steel bodies, cutters provide superior wear resistance and long life, with anti-kickback design.This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications..
  • [Application scene] Suitable for wood, MDF, particleboard, plywood,compact panels, laminate, acrylic and etc.it can easily cut the groove you want.Do not cut various metals and non-wood materials such as: steel, iron, sand, etc.This bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
  • [Perfect fit]Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc. Our slotting knives can easily fit most devices on the market, so you don’t need to worry about fit.Perfect choice of prof....
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock