ReviewsIndustrial Steel Banding Tool

Poweka CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Auto Repair Tool for Car Tire Repair Clamp Removal - Car Banding/band Tool Kit, Automotive Hose Axle Plier

  • This set contains both a CV joint clamp banding tool and CV boot clamp pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap..
  • Joint clamp banding tool: an effective tool for installing CV clamps. The banding tool works with the installers ratchet and 1/2" socket or uses the provided lever to tension the clamp..
  • CV boot clamp pliers:This device crimps and flattens ear-type clamps found on CV joint boots, and installs quick clamps on the fuel filter and cooling system hoses..
  • With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. Pliers with jaws and formed handles for comfort, less user fatigue, and more productivity..
  • Made from high grade metal and plastic, with high hardness, long lasting. Package included: 1Pcs CV Clamp Tool, 1Pcs CV Joint Boot Clamp Pliers, 4Pcs Small CV Boot Clamps, 4 Pcs Large CV Boot Clamps..
Check Stock

Swpeet 10Pcs Ear Clamp Pliers with CV Boot Clamps Kit, Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars

  • ...s, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 —– The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 —– Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】—– In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 1Pcs CV Joint Boot Clamp Pliers and 1Pcs Ear Clamps Pliers In total 10Pcs in a box, can meet all your ....
Check Stock

Packaging Strapping Banding Kit - Tensioning Tool Sealer Tool Set with Manual Tensioner, Sealer, Heavy Duty PP Plastic Strapping Kit 3290 feet(1000M) Length, 500 Metal Seals

  • INDUSTRIAL POLYPROPYLENE (PP) STRAPPING KIT includes: 1 roll of black 1/2 inch x 7200 feet hand grade polypropylene (PP) strapping with 8 inch x 8 inch core size and 600 lbs break strength.
  • P-330 polypropylene strapping tensioner (durable banding tool with a cutter works both with polyester and polypropylene strapping).
  • C-3004 front action polypropylene strapping sealer/crimper (regular duty manual sealer with heat-treated steel parts).
  • CA-240H advanced strapping cart/dispenser with tray and brake for PP coils with 8 inch x 8 inch core size.
  • COST-EFFECTIVE, ELASTIC AND FLEXIBLE: Polypropylene is the most commonly used and least expensive of all strapping materials. Resistant to most chemicals, UV and moisture. It also very elastic and flexible thus can wrap odd-shaped or irregular shapes.
  • HIGH-PERFORMANCE WORKING STATION: The Polypropylene (PP) strapping kit is intended for light and medium-duty packaging strapping such as banding cardboard boxes, newspapers, textiles, etc. Wheeled CA-240H strapping cart/dispenser prevents strapping from unwinding, store and transport coils and tools around a facility or warehouse.
  • STRAPPING KITS FOR ALL YOUR NEEDS: We offer different packaging strapping solutions that include pre-picked strappi....
Check Stock

IDL Packaging - WCSK.34.250 3/4\ x 250' PRO Woven Cord Strapping Kit, 2400 lbs. Break Strength - Include Consumables for up to 100 Strapping Cycles

  • BEST IN CLASS HEAVY DUTY CUTTER H-230 is a manual tool with wide blades suitable for cutting the steel, polyester (PET), or polypropylene (PP) banding from 3/4 inch to 1 1/4 inches width and up to 0.044 inch thickness. One-hand operated tool provides good usability and work efficiency. All steel construction significantly prolongs the life of the tool. The cutter weighs 1.8 pounds.
  • PORTABILITY AND BETTER PERFORMANCE: Small design makes this tool perfect to carry on the belt for remote usage. The ergonomic and easier-to-use cutter makes cutting strapping easy and faster when it comes to getting rid of the pallet strapping while unpacking.
  • WIDE RANGE OF MODELS: We offer a wide choice of banding cutters and cover the maximum range of strapping widths from 3/8 inch and up to 2 inches and thickness up to 0.05 inch (heavy-duty cutter H-410 and H-305 for steel strapping).
  • ABOUT IDL PACKAGING: Responsible and considerate approach to all customer needs is the key principle of our service. We value our customers and only offer packaging products that are carefully chosen and approved by our packaging experts. We actually use these products ourselves when packaging and fulfilling orders.
  • BEST FIT: This strapping cutter is suitable for steel, polyester and cord stra....
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

Szliyands CV Joint Ear Clamp Banding Tool

  • The perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively..
  • This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use..
  • Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • Can also be used for securing late model GM CVJ boot clamps..
Check Stock

Pacific Handy Cutter HH700 Banding and Strapping Cutter, Metal Head Concealed Blade for Cutting Packaging Straps

  • CUT AWAY PLASTIC BANDING AND STRAPPING — This plastic strap cutter quickly and easily cuts away pallet banding, strapping and more..
  • EASY BLADE CHANGE — Replace the blade with ease, ensuring that you always have a safe, sharp cutting tool on hand..
  • REDUCE WORKPLACE INJURY — Reduce the risk of workplace injury with a safely-designed, protective strapping cutter that prevents the need for exposed knife blades..
  • STURDY STEEL DESIGN — The heavy-duty steel design and easy-grip handle will not easily break or bend, allowing you a clean cut on the first try..
Check Stock

IDL Packaging H-230 Strapping Cutter for Steel & Polyester (PET) & Polypropylene (PP) Banding from 3/8\ to 1 1/4\ Width and up to 0.044\ Thickness – Heavy-Duty Best-in-Class Tool with Wide Blades

  • INDUSTRIAL POLYPROPYLENE (PP) STRAPPING KIT includes: 1 roll of black 1/2 inch x 9000 feet hand grade polypropylene (PP) strapping with 8 inch x 8 inch core size and 300 lbs break strength.
  • P-330 polypropylene strapping tensioner (durable banding tool with a cutter works both with polyester and polypropylene strapping).
  • C-3004 front action polypropylene strapping sealer/crimper (regular duty manual sealer with heat-treated steel parts).
  • CA-240H advanced strapping cart/dispenser with tray and brake for PP coils with 8 inch x 8 inch core size.
  • COST-EFFECTIVE, ELASTIC AND FLEXIBLE: Polypropylene is the most commonly used and least expensive of all strapping materials. Resistant to most chemicals, UV and moisture. It also very elastic and flexible thus can wrap odd-shaped or irregular shapes.
  • HIGH-PERFORMANCE WORKING STATION: The Polypropylene (PP) strapping kit is intended for light and medium-duty packaging strapping such as banding cardboard boxes, newspapers, textiles, etc. Wheeled CA-240H strapping cart/dispenser prevents strapping from unwinding, store and transport coils and tools around a facility or warehouse.
  • STRAPPING KITS FOR ALL YOUR NEEDS: We offer different packaging strapping solutions that include pre-picked strappi....
Check Stock

MIKKUPPA CV Joint Boot Clamp Pliers - Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier

  • Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • CV boot clamp installer: With a built-in cutter and winding mechanism the banding can be tightened and cut quickly and effectively..
  • CV joint boot clamp plier set: Heavy-duty pliers with steel jaws and formed handles for extra comfort in use..
  • To be used with any banding up to 10 mm (0.39 inch) in width, Used for securing ATV UTV CV boot clamps..
  • WHAT YOU GET: CV boot clamp piler set X1, With Professional After-Sales Service..
Check Stock

PSCCO 8PCS MHS012 Power Supply Fixing Bracket, Bracket Mounting, Power Supply Mounting Bracket Accessory

  • Stainless Steel Bull's Eye Flared Leg sign bracket with Stainless Steel Bolts are designed for mounting signs using ISO's regular banding or light duty band.
  • The 3/4" slot allows a single or double wrap of band.
  • Use to mount traffic signs, security cameras or traffic cameras.
  • Manufactured and made in the USA - Corrosion resistant.
  • Tools used to install the Stainless Steel Bull's Eye Flared Leg sign bracket using ISO band are: Cool Tool #T001, Ratchet Tensioner #T101, Self-Opening Spring Cutter #T502, Medium Band Cutter #T545, Tensioning Tool #T1916 and Crimping Tool #T1952.
Check Stock