ReviewsIndustrial Thread Cutting Oil

TFCFL Industrial Sewing Machine,Heavy Duty Auto Leather Sewing Machines for Sewing Clothing Fabrics Jeans Tents

  • 【 Industrial Sewing Machine 】Model: SM 6-9.
  • Needle used: 1, needle type: DP*5 No. 17.
  • Presser foot stroke: manual 6mm(0.24 in), knee control 13mm (0.5 in).
  • Use of the rotary hook: 2 times the thread volume of the rotary hook.
  • Lubrication method: oil pump automatic lubrication.
  • Outer packaging volume: 580x250x530mm (22.83 x 9.84 x 20.87 in).
  • 【Premium Qaulity】 Thick material lockstitch sewing machine adopts a connecting rod type feeding mechanism, stable operation, small back stitch error, uniform stitch and beautiful appearance..
  • 【High Performance】 The automatic lubrication device and the silicone oil lubrication thread device are used, so the sewing performance is extremely stable. At the same time, the use of a double-threaded large rotary hook greatly improves the sewing efficiency..
  • 【Package Include】 1. 1 set of winder, One set of single needle two thread rack, 1 xset of machine head rubber pad, Knee control module x1 set, Screwdriverx 1 set,Support pillar x1,Belt 1, Oil cans x2.
  • 【Wide Applications】 Auto leather sewing machines is suitable for sewing all kinds of thin and medium-thick material clothing, fabrics, etc. in clothin....
Check Stock

Irwin Tools 7736 Irwin Re-Threading Hex Die-3/8\-24 NF, HCS Left Hand Die-Bulk

  • Made of heat treated carbon steel, high strength and hardness.
  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear..
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost..
  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing..
Check Stock

Dressmaking Sewing Craft Scissors, Professional Stainless Steel Pinking Shears Comfort Grip, Serrated & Scalloped Blades Cut Tailor Decorative Tool - Fabrics Leather Paper Craft (Serrated 7mm)

  • Sharp Blade - Different inch pinking shears feature stainless steel, razor sharp blades for easy and perfect decorative cutting. The heavy duty blades ensure every cut is sharp and crisp, which makes these scissors great for any project or design..
  • Durable & Professional Scissors - Made of heavy duty Industrial Grade High Carbon Steel which is stronger and harder, durable for long time using and sharp to use easily and effortlessly..
Check Stock

IMT Pistol Grip Oil Feed Glass Cutter Tungsten Carbide Professional Stained Glass Cutting Tool with 2 Replaceable Head and Oil Reservoir- 2mm-12mm

  • ❤️Sales Now: Limited time offer!★Unique Pistol Grip Design - The glass cutter is easy to hold and reduces wrist fatigue, letting you score glass....
  • ★Heavy Duty - This stained glass cutting tool uses industrial grade frosted iron Head , the wheel is made of durable Tungsten Carbide, cutting life....
  • ★Refined Oil Feed System - The hand-held mosaic cutter features automatic oil dispensing system keep the wheel lubrication while you cut. Wide....
  • ★Replaceable Cutter Heads - Each package comes with 2 cutter heads, One is for cutting 2mm-6mm thickness glass, the other is for 6mm-12mm. The....
  • ★Satisfaction Guaranteed - The heavy duty cutter has passed the CE, SGS certification. We offer a 100% Satisfaction Guarantee on all sales. Oil does....
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

HOWARD Butcher Block Conditioner and Cutting Board Oil Food Grade Conditioner and Oil Great for Wooden Bowls and Utensils Re hydrate your Cutting Blocks 12 Fl Oz Pack of 1

  • REVITALIZING FORMULA BLEND prevents drying and cracking of hardwoods and bamboo. Great for restaurant cutting boards, great for home kitchens even chef cutting boards. This is the safest conditioner and will rejuvenate and revitalizes cutting boards. Great size for restaurants and industrial kitchens..
  • HOWARD BUTCHER BLOCK OILS ARE TASTELESS AND ODORLESS. Vitamin E cutting boards will absorb oils and great at protecting the lifespan of the wood. Apply the butcher block oil to the board and the ingredients penetrates into the wood surface. Formula is great for wooden utensils. Prevent cracking and drying of unfinished wood.
  • Howard's BUTCHER BLOCK CONDITIONER IS THE SAFEST butcher block conditioner on the market..
  • FOOD GRADE MINERAL OIL with Vitamin E. Howard Natural oils provide another level of protection High quality pure natural food grade mineral oil Ideal for salad bowls wooden spoons and wooden toys Benefits.
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

Professional Carbide Tungsten Alloy Handle Glass Cutter Tool with Range 2-19mm Professional Cutter for Thick Glass Mosaic and Tiles - Pencil Shape & Design (Glass Cutter) (Regular)

  • Light Weight Finger Stop Design: Designed for comfort, durability, and performance. This glass cutter with a finger stop design prevents finger from slipping when griping. Would help users to cut with ease, and get a precise and clear score..
  • Industrial Grade and Precise: The cutting wheel is made of durable Tungsten Carbide and cutting life is over 12.42 meters. Made with a cutting range of 5/64" to 3/4". Absolute precision guaranteed..
  • Use on a Variety of Materials: This glass cutter can be applied to glass, tiles and mirror. An perfect ideal tool for household and cutting work..
  • Self-Oiling System: The glass cutter is self-oiling, when pressure is applied, oil automatically flows with the oil dispensing system and keeps blade lubricated every time you cut. Please note that the kit doesn't contain oil and need to buy seperately.
  • Comfortable and Portable: The metal hand grip is easy to hold and reduces wrist fatigue. A lightweight and compact design means the glass cutter tool is eass to carry..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ..., and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock