ReviewsIndustrial Valve Supplier

MRbrew Polished Chrome Beer Faucet Stainless Steel Valve Core With Tap Handle+Tap Soother for Keg Tap Tower Beer Shank and Kegerator

  • ????CORE COMPONENTS???? Food Grade 304 Stainless Steel Valve Core , Food Grade Rubber Seals, Do Not Worry about leakage, Full Health Protection.
  • Removable Beer Tap Faucet Handle to meet individual needs and Provide Extra Faucet Sanitary Covers for better hygiene.
  • ????MAIN MATERIAL???? Low Lead brass material. 1600°C High Temperature and High Pressure Casting Integrated Molding, Complete evaporation of harmful substances, to ensure MRbrew Draft beer faucet No Cracks, No Leakage Point.
  • High Hardness, Large Tensile Strength, Strong Toughness,Switch up to 550,000 times.
  • ????PRECISE DESIGN???? Precision Soft Beer Design, Beer : Foam= 8 : 2 ????Strict Guaranty that the interior of the Tap Faucet is smooth and clean, with precise and smooth details, No Fouling and No Blockage, so that bacteria cannot grow.
  • ????SURFACE TREATMENT???? MRbrew Beer Faucet adopt 8 Bright Polishing Process, Food Grade Anti-acid and Alkali Environmental Chrome Plating, Smooth and Delicate touch, Easy to Clean, Save time.
  • ????MRbrew USA REGISTERED BRAND???? Forever Supplier is the only supplier .100％ 90 DAY MONEY BACK GUARANTEE.
Check Stock

JACO FlowPro Tire Inflator with Pressure Gauge - 100 PSI

  • Mechanic Recommended: Performance tested & calibrated accurate to ±2% at our NIST and ANSI certified calibration lab, providing the ability to measure, inflate, & air down tires with precision up to 100 PSI without relying on batteries. 0-100 PSI dial glows in the dark for high visibility at night..
  • Fully equipped with a solid steel body w/ a rugged matte black powder coated finish, heavy duty 21″ flexible hybrid air hose, precision “push-to-inflate” air filler thumb trigger, and built-in air bleeder valve to quickly air down overinflated tires..
  • Lightning Chuck – includes our all-new patented automatic lock-on Lightning Air Chuck w/ advanced locking mechanism & quick-release valve – no more leaking air or fighting with the valve stem for a proper seal..
  • Complete in-line inflation set – ready to attach to your air compressor set-up with 1/4″ NPT fittings – accessories includes (1) industrial quick-connect steel plug fitting, (1) thread seal tape roll, and Quick Start Guide..
  • 100% Lifetime Guarantee by JACO (for any reason) when you order today, so click “Add to Cart” with confidence and take your garage or shop tire filling setup to the next level w/ professional, industrial-grade air tools!.
Check Stock

NIBCO - NLN10XK W910B-LF/W960B-LF Silent Wafer Check Valve Lead-Free Class 125 Iron Body Bronze Seat and Disc 6

  • The NIBCO lead-free wafer style silent check valve is spring actuated with renewable bronze seat and disc.
  • The spring return reduces noise for quiet operation.
  • Check valves prevent backflow by automatically closing when fluid reverses direction.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0. 25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

NIBCO - NLN10XH W910B-LF/W960B-LF Silent Wafer Check Valve Lead-Free Class 125 Iron Body Bronze Seat and Disc 4

  • The NIBCO lead-free wafer style silent check valve is spring actuated with renewable bronze seat and disc.
  • The spring return reduces noise for quiet operation.
  • Check valves prevent backflow by automatically closing when fluid reverses direction.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 12V DC Normally Closed

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock

1 Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARR....
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock