ReviewsInfineon Ic

GIGABYTE TRX40 DESIGNARE (sTRX/AMD/TRX40/Direct 16+3 Phase VRM/Fins-Array Heatsink/Gen 4 AIC with 4 Extra M.2/ XL-ATX/Motherboard)

  • Supports 3rd Gen AMD Ryzen Threadripper Processors.
  • Quad Channel ECC/ Non-ECC Unbuffered DDR4 8 DIMMs.
  • 16+3 Phases Infineon Digital VRM Solution with 70A Power Stage. Operating System Support for Windows 10 64-bit.
  • Triple Thermal Protection with Fin-Arrays and 8mm Maga-Heatpipe.
  • Dual Intel Gigabit LAN with cFosSpeed to shorten response time.
Check Stock

TC-R811 SMA Male Dual Band Walkie Talkie Antenna Soft Whip VHF UHF 2M/70CM Handheld/Ham 2 Way Radio Antenna for Retevis Wouxun TYT MD-380 YAESU VX-6R FT-60R FT-70D

  • [Soft Whip Walkie Talkie antenna]Frequency:144/430MHz(136-174MHZ,400-470MHZ).
  • Compatible For YAESU/Vertex Standard VX-1R, VX-2R, VX-3, VX-3R, VX-3E, VX-5R, VX-6, VX-6R, VX-7, VX-7R, VX-8R, VX-8GR, VX-10, VX-14, VX-17, VX-110, VX-130, VX-131, VX-132, VX-150, VX-151, VX-152, FT-60R, VX-160, VX-170, VX-177, VX-180, VX-400, VX-410, VX-414, VX-417, VX-420, VX-424, VX-427, VX-300, VX-500, VX-510, VX-520, VX-800, FT-2D, FT-50, FT-60, FT-60R, FT-70, FT-70D, FT- 270R, FT-250R, FT-277R, FT1XD, VX-210, VX-210A, VX-230, VX-8D, VX-8DR, VX-2R,etc..
  • Compatible For TYT MD-280 MD-280 PLUS MD-380 MD-390 MD-UV380 MD-UV390 MD-680 TH-2R TH-F5 TH-F8 TH-UVF9 TH-UV3R TH-UVF8D TH-UVF9D TH-UVF1 TH-UV8R UVF9 UVF9D UVF8D F8 F5 F3 F7 TC-3000A TC-3000B TC-3000S UVF10 UV6R UVF9 UVF11 UVF8 DP-290 DP-280Plus DM-UVF10 TH-446 TH-UV8000D , etc..
  • Compatible For ICOM IC-T70, IC-P7, IC-S70, IC-80AD, IC-91A, IC-91AD, IC-92AD, IC-T70A, IC-T90A, IC-T70E, IC-Q7A, IC-R5, IC-R6, ID-92, IC-F50V, IC-F50, IC-M88 IC-F51ATEX.
  • Compatible with All Handheld/Portable Two Way Radio uses the SMA-male Connection antenna: For Retevis: RT82 RT3.
Check Stock

GIGABYTE TRX40 AORUS PRO WiFi (sTRX/AMD/TRX40/Fins-Array Heatsink/12+2 Phases Infineon Digital VRM/3x PCIe 4.0x4 M.2/Intel WiFi 6/Intel GbE LAN/ATX/Motherboard)

  • Supports 3rd Gen AMD Ryzen Threadripper Processors.
  • Quad Channel ECC/ Non-ECC Unbuffered DDR4, 8 DIMMs.
  • 12+2 Phases Infineon Digital VRM Solution with 70A Power Stage.
  • Advanced Thermal Design with Fins-Array Heatsink.
  • Intel GbE LAN with cFosSpeed Internet Accelerator.
Check Stock

GeeekPi Raspberry Pi TPM2.0 Module, TPM9670 Module Based on an Infineon Optiga™ SLB 9670 TPM 2.0,add-on GPIO TPM Module Compatible with All Raspberry Pi Models

  • Compliant with TPM Specification 2.0 Rev. 01.38.
  • TRNG (Real Random Number Generator) - True Hardware Random Number Generator..
  • Preventing dictionary attacks to retrieve private keys.
  • Package includes:1 x TPM9670 Module for Raspberry Pi.
Check Stock

DEVMO 4-pin 12AWG DC Power Supply Cable Compatible with Yaesu Radio FT-450D FT-891 FT-991-A FTDX-1200 Kenwood TS-480SAT TS-590SG Icom IC-7000 IC-7200 IC-7600 IC-7300 Alinco DX-SR9T Vertex

  • Fit FT-450D FT-950 FT-891 FT-991 FTDX-1200 FTDX-3000 etc with 4 pin power socket.
  • Fit TS-590SG TS-890s TS-480 TS-480HX TS-480SAT TK-90 TK-790 TK-890 TK-690 etc.
  • Fit IC-7000 IC-7100 IC-7200 IC-7300 IC-7600 IC-7610 IC-9700 IC-910H IC-F9511HT etc.
  • Fit DX-SR9T DX-SR8T VX-1400 VX-1700 VX-6000 and other radio transceiver use 4pin power canble plug.
Check Stock

Juno Lighting 27HZ-WH LED Tapered Downlight Cone Trim, 6-Inch, White Trim with Haze

  • Juno trim series 27 is designed for a 6-inch juno housing and has an aperature of 5.75 inches. Perfect when paired with incandescent and LED juno housings.
  • Airtight and energy Star when paired with select housings - see spec sheet for complete List.
  • Compatible with IC22, IC22 W, IC22S, IC22R incandescent housings with 5W PAR30, 75 PAR30L or 65W BR30 light bulbs.
  • Compatible with IC2, TC2, TC2R housings and can be used with 50W PAR30, 75 PAR30L or 65W BR30 Light bulbs.
  • Compatible with IC22LED, IC22RLED and TC22LED LED housings.
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Spektrum S2200 G2 AC 2x200W Smart Charger, SPMXC2010

  • Up to 200W power per channel or 380W on one channel for fast charging.
  • Charges AND balances Smart G2 batteries with one simple IC3 or IC5 connection — no separate balance lead needed.
  • Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected.
  • Smart software tracks and stores numerous smart battery data.
  • Includes IC3 and IC5 charging output ports — eliminating the need for a separate IC3 or IC5 adapter to charge Spektrum Smart batteries.
Check Stock

Bitray Professional Tool Chip Extraction Tool PLCC IC Extractor Chip Spring Assisted Extractor Puller Removal Puller Tool

  • Package includes: U Type IC Chip Extractor x 1 + PLCC IC Chip extractor x 1..
  • The U-shaped IC extractor is used to pull out the IC chip on the circuit board. It is easy to use and simple. It is an ideal tool for families and students to do experiments..
  • PLCC IC chip extractor is a spring-assisted extraction tool, specially designed to remove PLCC..
  • The body is made of stainless steel, and there is a PVC insulation package outside to prevent static electricity from damaging the IC components..
  • It is very suitable for professional maintenance personnel, such as TV/DVD/PC maintenance personnel or IC workers..
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock