ReviewsIngot Casting Heater

RotoMetals Lead Free Pewter - Alloy R-92 Casting Ingot 92% Tin 8% Antimony

• Great for casting figurines or Custom Jewelry.

Kada 1kg Graphite Ingot for Silver Gold Casting Mold Mould Graphite Crucible Melting Casting Refining 2 Packs

• 2Packs Graphite Ingot 1kg for Metal Gold Silver Brass Alumium Jewelry Melting Casting Refing.
• Size:Inner:3.54x1.57x0.79 inch (90x40x20mm) Outter:3.94x1.97x10.04 Inch (100x50x255mm),Volume is 1kg Gold or 500g Silver.
• Temperature Could be 3632 F(2000 C),Resistant to Strong Acids and Alkaline.Clean and Non-Stick Material,Previous Quality for Jewelry Casting..
• Made by Pure 99.95% Graphite,.Ash content less than 0.1% Density:1.85g/cm3.
• The Pictures are True Photos.Package by buble Bag and Cartoon.

RotoMetals Zinc Ingot 99.7% min About 3.5 pounds Great for Small Castings/Weight- Made in USA

GanFindX 1 PCS (#3-2.5KG-135ML) Pure Graphite Ingot Molds for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass with Packing Box

• Specification: #3 Inner 2.17 x 0.94 x 4.02 inch, The capacity is an approximate volume is 2.6 kg gold or 1.4 kg silver.
• High Purity Graphite: Graphite purity is 99.95%, good thermal stability and heat dissipation make it more than ordinary. The refining effect of silicon carbide graphite crucible is better, good thermal stability and heat dissipation make it more than ordinary. The refined effect of silicon carbide graphite crucible is better..
• Characteristics: It has good thermal conductivity, corrosion resistance, impact resistance, acid and alkali resistance, and can withstand a temperature of 2000℃/3632℉ without affecting the mold..
• Application: The mold can be used for experiments and casting of non-ferrous metals such as gold, silver, copper, etc. Can also be used as an ingot mold..
• What's in the box: 1 PCS of graphite ingot mold with Packing Box, Convenient to Carry, Improve smelting efficiency..

Graphite Crucible Set,Geevorks 6 Pcs Ingot Mold Set High Purity Graphite Torch Melting Casting Tool for Scrap Jewelry Metal Gold Melting Refining Forge

• 【You Will Get】This 6 pieces graphite torch melting casting kit, including crucible bowl, tongs, trough, graphite stirring rod, rectangle graphite crucible and cylinder graphite crucible.【Please refer to the specific product size in the picture for the size.】.
• 【High Quality】Using modern ceramic processing technology and fused silica as main r-aw material, the graphite crucible has nice thermostability, high purity, high strength, corrosion and shock resistance..
• 【Multipurpose】These graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more..
• 【Graphite Crucible】Designed for melting applications.Stirring rods help you evenly mix and stir precious metals during melting.
• tongs are used to clamp metal casting mold under high temperature conditions..
• 【Casting DIY】Ideal for satisfying lab, test analysis and other purposes.
• Taking the product size into account, small-capacity metal melting projects will be more suitable..

100oz Cast Steel Ingot Mold for Melting Casting Refining Gold Silver Copper Aluminum Brass Precious Metals etc

• 【Fit on】 Fits Approximately 100 oz of metal,ideal for casting gold, silver, copper, aluminum, and more.Suitable for laboratory, school science education..
• 【Function】Melting casting refining gold silver copper aluminum brass precious metals..
• 【Material】Made of high-quality steel,it has well thermal stability, corrosion resistance and impact resistance, strong acid and alkali resistance, good thermal conductivity..
• 【Note】The 100 ounce Cast Iron ingot mold has a slight wall taper for better metal removal. This Mold is great for making Loaf type bars. The weight of each bar depends on what metal your working with and how full you fill the cavity..
• 【Satisfaction Guarantee】 We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. We also support a 12-month warranty..

Teton-Bond Petrobond Fine (130 Mesh) Foundry Metal Casting Sand For High Detail (5lb)

• 【TRASH TO TREASURE】Foundry Metalwork is surprisingly easy and affordable, and well with TOAUTO TMF6000-V2 full line of furnaces and smelting products, you can easily make turn scarp metal into something fancy artwork, like ingots, special parts and and 3D casting ornaments. METAL MELTING MADE EASY!.
• 【UPGRADED VERSION-POWERFUL HEAT PERFORMANCE】 Upgraded to NEW BLACK Single Burner for orders after March 8, 2022. TOAUTO TMF6000-V2 melting furnace equipped with a single burner with 250000W/H power and adjustable 30 psi regulator propane maintains to maximize heat efficiency. Propane melting furnace can be heated up to 1300 °C / 2372 °F and can melt metals with a melting point below 1300 ° C in 15-20 Minutes such as gold, sterling silver, pure copper, and aluminum..
• 【COMPACT BUT SPACIOUS】TMF6000-V2 comes with 6KG LARGE crucible that could contain 12KG gold,7KG silver,6KG copper,1.6KG aluminum. TOAUTO FURNACE gives the max capacity of the foundry as 10 KG. Plus a 113ML Graphite Ingot Mold for you to start melting right away!.
• 【EFFICIENT INSULATION BARRIER】Furnace interior fully lined with a 2” （50mm）high-density Ceramic Fiber Blanket that can easily withstand 2000+°F to insulate, lightweight and durable. Also, contain a 4.5″X 9″X....

Tin Ingot 2 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (2 pounds | 99.9+% Pure) Our 2lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 2lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 8lbs total, simply add a quantity of 4 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 2lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Tin Ingot 4 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (4 pounds | 99.9+% Pure) Our 4lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 4lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 12lbs total, simply add a quantity of 3 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 4lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

ALUMINUM WELDING: A COMPLETE GUIDE TO ALUMINUM WELDING

• 1.【Body Material】This torch track gas cutting machine is made of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability. It features light and compact in structure, as ideal portable machine..
• 2.【Application】This machine is suitable for factories such as shipbuilding, machinery, steel structure, construction and other industries. Also suitable for other large, medium and small enterprises to cut steel..
• 3.【Tech Parameters】Cutting Speed: 6"-31.4" (150-800 mm) /min.
• Cutting Thickness: 0.23"-4" (6-100 mm) (by standard accessories). Grove range: I.Y.V(45°). Tracks: about 6'(1.8m)..
• 4.【Advanced Design】The speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting. And it adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions..
• 5.【Detailed Instructions】This machine comes wi....

Songbird Essentials SE7034 8 oz Bird Bath Protector (Set of 1)

• ...ly prevent water from freezing and does not heat the water. Low power consumption ensures safe use and save the environment and electricity..
• ✅ 【Waterproof & Leakproof Design】-- The birdbath water heater is made of heavy duty & durable cast aluminum protecting against any rust, cracking. The heating element is casting resin insulated and protect birds from scalding by the heating element. And the heater has smooth surface is easy to clean..
• ✅ 【With Longer Cord 3ft】-- Our UL-listed PVC cords with thicker wire diameters, which can use safty in winter. It is safer and more reliable compared with the thinner. This Longer Cord were developed based on consumers' feedback. (3.3ft cord)it is more longer than other's..
• ✅ 【Easy to Use & Works Well】-- Just put the heater in the center of birdbath and covered with water/ice.And plug it into a grounded receptacle outlet and working, plug and play! You can use this bird water heater all winter and this heater works great..