ReviewsInjection Blow Molding Machine

Bonost 500Pcs Threaded Inserts Kit M2 M3 M4 M5 - Female Thread Heat Set Insert Brass Knurled Thread Insert Nuts for Plastic Injection Molding 3D Printing Metric

  • 【Designed for Injection Molding】: With deep & clear knurls, the threaded inserts will add enough strength to screw connections when inserted into plastic components. The softened plastic will flow into the knurl pattern and then harden to form a firm bond with the insert..
  • 【High-quality Material】: Made of premium brass material, our threaded insert for plastic has both aesthetics and high strength, which can be used for a long time. And the high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts..
  • 【How to Use】: Female thread knurled insert nuts are suitable for mounting into tapered holes by heating or for molding during injection molding. You can use a soldering iron to heat it up and then pressing it into the hole. It is easy to control and at a low cost..
  • 【Professional Insert Nuts Kit】: Various metric thread sizes available, including M2, M3, M4, and M5. Widely applied in laptop plastic housings, 3D printers, automotive, electrical injection molding, and more. And the every type of heat set inserts has an individual bag to prevent them from mixing in transit..
  • 【What You Get】: 500 pcs threaded inserts assortment kit, and customer friendly service. There are 15 different sizes to s....
Check Stock

YIYITOOLS Dead Blow Hammer-45oz(3LB), Red and Black, Shockproof Design, No ReboundMallet Machinist Tools Unibody Molded Checkered Grip Spark and Rebound Resistant (YY-3-011)

  • The hammer head is equipped with steel balls, which is shock-proof design, no rebound percussion, and more comfortable to use.
  • Double percussion surface design, the hammer surface is flat, the percussion surface is not damaged.
  • The hammer head and the hammer handle are closely connected, and it is not easy to break and deform under heavy blow.
  • The whole adopts high-quality plastic injection molding, wear-resistant and durable, and long service life.
  • Suitable for exterior wall tile, interior floor, furniture decoration.
Check Stock

FZ-9 LOT + BAT F0+ Meca Trong Batwing Fairing Windshield for Suzuki VL1500LC Intruder 1998-2004 Primer Single Din

  • Easy to install and no install instructions,Mounting hardware are not included..
  • Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine..
  • Material:100% made of high quality ABS plastic (Not PVC) to guarantee a longer life time and product durability.
  • Fits For '14-later Electra Glide, Street Glide, Ultra Limited and Tri Glide models..
  • Package Included: 1x Outer Fairing with Vent Accent (As Picture Shown).
Check Stock

Bosworth 0921092 Trim II Powder, Shade B1, 1.5 oz Capacity

  • ♥Notice:It must be used with a Dental Injection Molding Machine,needs to be heated to a temperature of 287±10°C. (about 550°F) and then injected into your dental mold.If you don't have the injjection machine with high temperature,not recommend this,please.
  • ♥Melting time:11-15min.10 cans(About 9g/can).Without Blood Streak..
  • ♥High translucent close to color of gums.Color is effected by the the heating time..
  • ♥Polish easily because of smooth surface..
Check Stock

TCMT Vivid Black Front Outer Batwing Fairing Fits For Suzuki VL800K1 Volusia C50/C50T New

  • This is the perfect replacement for your cracked, worn, or scratched fairing shell!.
  • Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine.
  • Package included : 1x Vivid Black Outer fairing.
  • Easy to install and no install instructions,Mounting hardware are not include.Pre-made threaded holes for easy to attach the inner fairing.
  • With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence.
Check Stock

2xhome Set of 4 Stackable Mid Century Modern Clear Ghost Side Chairs Dining Room Victoria Transparent Crystal Polycarbonate Plastic Acrylic No Arms Molded Accent Living Desk Office Guest Small Space

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some....
  • Set of 4 Victoria ghost chairs - Single mold injection.
  • Made from Polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party,....
Check Stock

2xhome Louis Large Transparent Vanity Mid Century Ghost Chair, Clear

  • Made from crystal Clear transparent polycarbonate (stronger than acrylic).
  • Some assembly required, chair Back screws to seat with 2 Hex screws (included), stackable and UV protected.
  • Ideal for indoor or outdoor, home and office use - living rooms, dining rooms, bedrooms, nurseries, waiting areas, parties, banquets, wedding party, and matching with your dining table..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Check Stock

2xhome - Set of 4 (4 Chairs in Total!), Black, Victoria Style Ghost Side Chairs Dining Room Chairs - Victorian Accent Seat - Lounge No Arm Arms Armless Less Chairs

  • Set of 4 (4 chairs in total!), Victoria ghost chairs Black chairs - Single mold injection.
  • Made from Black polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party, and matching with your dining table. Etc. Multiple colors available - Clear, Smoke, Black, White (Please see our others listing!)..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Front Outer w/Inner Batwing Upper Fairing Cowl Fits for 1996-2013 Harley Davidson Touring Electra Glide Street Glide and Trike models,Black

  • This is the perfect replacement for your cracked, worn, or scratched fairing shell!.
  • Made from thick raw ABS injection-molded plastic, it comes with a nice smooth surface straight from the injection molding machine.
  • Package included : 1 x Matte Black Inner fairing,1x Vivid Black Outer fairing(Non-Detachable style).
  • Easy to install and no install instructions,Mounting hardware are not include.Pre-made threaded holes for easy to attach the inner fairing.
  • With always fast and free shipping on every order,focusing on Quality and Service,so you can shop with confidence.
Check Stock

uxcell knurled Insert Nuts - 25Pcs 1/4\-20 Female Thread Brass Threaded Insert Embedment Nut for 3D Printer

  • [Thread Size] - Thread Diameter: 1/4"-20.
  • [Material] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
  • [Feature] - It can be installed into a plastic matrix by ultrasound or heat during the injection molding process..
  • [Easy to Install] - The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm and even, and easy to install..
  • [Application] - Can be widely used in 3D printing injection molding to achieve tight fixation..
Check Stock