ReviewsInjection Molding Machines

2xhome Set of 2 30” Seat Height Modern Contemporary Bar Stool with Oval Back Armless Polycarbonate Transparent Clear

Two Clear Ghost Bar Stools 30" Seat Height (Not Stackable).
Made from Crystal Clear transparent polycarbonate (stronger than acrylic).
Some assembly required, Chair back screws to seat with 2 hex screws (included), UV Protected.
Ideal for Indoor or Outdoor, Home and Restaurant - Living Rooms, Dining Rooms, Bars, Kitchens, Parties, Banquets, Wedding Party, and much more!.
Due to the glossy finish of the chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..

Check Stock

MYLBOO Compatible with Huawei MediaPad M3 Lite 8.0 Case - MediaPad M3 Lite 8.0 Slim Folding Cover/MediaPad M3 Lite 8.0-inch Tablet (Red)

Selection of imported environmental protection PC material, through high temperature molding high precision injection molding machine..
The material in line with European environmental standards, both sides using the new clean scrub UV fuel injection technology, make the shield feel full, the appearance of high-grade generous..
hardness is full, can effectively protect the body of the mobile phone does not scratch bruise..
Surface dust nonstick fingerprint design not easily soiled dust easy to clean..

Check Stock

LMioEtool R38 18mm x 50mm(Inner H x Inner W) Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC, with End Connectors - Semi Enclosed Type (Inner Side openable)

Type: Semi Enclosed Type (Inner side openable).
Internal Size: 18mm x 50mm (Inner H x Inner W).
Change Size: You could link the cables with each other to form one long length you need..
The drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection molding machines, robots, automated warehouses and so on..
NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat but the whole chain can not completely lay flat due to prestress..

Check Stock

Cable Pulling Chain, Black Nylon Cable Pulling Chain, Flexible Nested Cable Pulling Chain with Less Noise for 3D Printer Parts, Engraving Machines,(S25 x 57 0.7M)

Top quality: Cable carrier made of high quality nylon 66 materials, low temperature resistant -25 , heat resistant 100 , strong and durable..
Widely used: cable pulling chain suitable for 3D printing, CNC machine tools, electronic equipment, fire fighting equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
Low noise: the surface of the drag chain is shiny and strong, which reduces the air tube drag and low noise, making the working environment quieter..
Exquisite workmanship: e-chain made of high-quality materials for thorough processing, greatly extends the product life cycle..
Convenient: The pull chain can be disassembled and connected at any length to meet the needs of work, easy to install and maintain..

Check Stock

Kepuch Custer Case for Sony Xperia Z3 Tablet Compact,Ultra-Thin PU-Leather Hard Shell Cover for Sony Xperia Z3 Tablet Compact - Blue

Selection of imported environmental protection PC material, through high temperature molding high precision injection molding machine..
The material in line with European environmental standards, both sides using the new clean scrub UV fuel injection technology, make the shield feel full, the appearance of high-grade generous..
hardness is full, can effectively protect the body of the mobile phone does not scratch bruise..
Surface dust nonstick fingerprint design not easily soiled dust easy to clean..

Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

LMioEtool R28/38 15mm x 15mm(Inner H x Inner W) Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC, with End Connectors - Semi Enclosed Type (Inner Side openable)

Type: Semi Enclosed Type (Inner side openable).
Internal Size: 15mm x 15mm (Inner H x Inner W).
Change Size: You could link the cables with each other to form one long length you need..
The drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection molding machines, robots, automated warehouses and so on..
NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat but the whole chain can not completely lay flat due to prestress..

Check Stock

LMioEtool R28/38 15mm x 20mm(Inner H x Inner W) Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC, with End Connectors - Semi Enclosed Type (Inner Side openable)

Type: Semi Enclosed Type (Inner side openable).
Internal Size: 15mm x 20mm (Inner H x Inner W).
Change Size: You could link the cables with each other to form one long length you need..
The drag chain has been widely used in CNC machine tools, electronic equipment, glass machinery, doors and windows machinery, injection molding machines, robots, automated warehouses and so on..
NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat but the whole chain can not completely lay flat due to prestress..

Check Stock

Kepuch Custer Case for ASUS Zenpad 3S 10 Z500M,Ultra-Thin PU-Leather Hard Shell Cover for ASUS Zenpad 3S 10 Z500M - Black

Selection of imported environmental protection PC material, through high temperature molding high precision injection molding machine..
The material in line with European environmental standards, both sides using the new clean scrub UV fuel injection technology, make the shield feel full, the appearance of high-grade generous..
hardness is full, can effectively protect the body of the mobile phone does not scratch bruise..
Surface dust nonstick fingerprint design not easily soiled dust easy to clean..

Check Stock