ReviewsInjection Screw

BLACKHAWK SERPA® Level 3 Light Bearing Duty Holster with Matte Finish Size 13 Black

  • Serpa auto lock release and passive Retention detent adjustment screw.
  • Thumb-activated pivot guard for additional security and full-length holster body protects rear sights.
  • Jacket slot duty belt loop and fits all Blackhawk injection molded platforms.
Check Stock

BLACKHAWK SERPA Level 3 Light Bearing Duty Holster with Plain Finish Size 04 Black

  • Serpa auto lock release and passive Retention detent adjustment screw.
  • Thumb-activated pivot guard for additional security and full-length holster body protects rear sights.
  • Jacket slot duty belt loop and fits all Blackhawk injection molded platforms.
Check Stock

uxcell 12x60mm Plastic Expansion Tube for Drywall with Hex Screws Gray 4pcs

  • Carbon Steel Screw Size: 8 x 64mm / 0.31" x 2.52"(Thread Dia*Total Length).
  • Package Content: 4pcs(+/-2%) x Plastic Expansion Tubes.
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock

Rev-A-Shelf White 32 Polymer Full Circle Lazy Susan w/Bottom Mount

  • Included: (2) Almond Kidney-Shaped Polymer shelves with bottom mount hardware - Independently rotating molded Polymer hardware - Kidney Lazy susans do not attach to any door - Designed for Corner Base Cabinets - Construction: Injection molded polymer plastic designed for durability - Shelf Weight Rating: 20 lbs. per sqft - Simple (4) screw installation.
Check Stock

Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

G5 Outdoors Montec 100 Grain 1-1/16\ Cut Broadheads (3 Pack)

  • The blade angle is designed to allow for repeated maximum penetration and devastation..
  • One-Piece Metal Injection Molding Construction, with no parts needed to replace or maintain. This broadhead is easy and simple to use, simply screw on and shoot..
  • Due to the strong tapered blade design's and angle it allows the Montec to be easily re-sharpened..
Check Stock

Polymer Kidney 1-Shelf Lazy Susan w/Bottom Mount Rotating Post for Corner Base Cabinets

  • Included: (2) Almond Kidney-Shaped Polymer shelves with bottom mount hardware - Independently rotating molded Polymer hardware - Shelves are adjustable once installed - Designed for Corner Base Cabinets - Construction: Injection molded polymer plastic designed for durability - Shelf Weight Rating: 20 lbs. per sqft - Simple (4) screw installation.
Check Stock

Rockford Fosgate R169X3 Prime 6” x 9” 3-Way Full-Range Coaxial Speaker (Pair)

  • The Punch P1694 is an impressive 4-way full-range speaker designed for fanatics who need a high quality factory replacement in an easy to install package.
  • The P1694 6”x9” 4-Ohm black speakers come as a pair, have a power handling of 75 Watts RMS/150 Watts Max and include grilles, mounting hardware and OEM adapter plate.
  • Featuring a PEI dome tweeter with built-in crossover and injection molded mineral filled polypropylene cone with butyl rubber surround that provides high output and accurate frequency reproduction.
  • FlexFit basket design utilizes slots instead of single screw sized holes that allow for a slight adjustment of the speaker when aligning with OEM mounting holes for a better fit.
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
  • 6-by-9-inch full-range speaker with 150 watts maximum power handling (75 watts RMS).
  • Mineral-filled and polypropylene injection molded cone with butyl rubber surround.
  • PEI dome tweeter with built-in crossover.
  • Flex Fit basket allows slight adjustment of the speaker when mounted.
  • 60Hz - 24kHz frequency response with 91dB sensitivity.
Check Stock

G 5 Outdoors Montec 1-1/8-Inch Cut Broadheads (3-Pack), 125 Grain

  • The blade angle is designed to allow for repeated maximum penetration and devastation..
  • One-Piece Metal Injection Molding Construction, with no parts needed to replace or maintain. This broadhead is easy and simple to use, simply screw on and shoot..
  • Due to the strong tapered blade design’s and angle it allows the Montec to be easily re-sharpened..
Check Stock

Gurmoir Back Door Aluminum Protective Housing Case for GoPro Hero 8 Black, Wire Connectable Metal Frame Side Open Video Cage with 52mm UV Filter for GoPro hero8, Rock Solid and Heat Dissipation

  • 【High Quality Aluminum Alloy Made.Compatible with Gopro Hero 8 Black Action Camera】Compatible with Gopro Hero 8 Black Action Camera, Aluminum alloy CNC injection molded, Delicate Design, easy to install. Weight:140g / 4.8oz.
  • 【With 52mm UV Filter +Allow 3 Sides to Mount the Protective Case, Meet Your Different Shooting Requirement,】The case comes with a 52mm UV Filter. but you can also mount other filter lens or polarizing lens of diameter 52mm lens with this case.you can mount your case with monopod.tripod.bike mount and other kit. allow 3 sides to mount the protective case, meet your different shooting requirement..
  • 【With Universal 1/4 inch Screw Hole and Cold Shoe Mount】 with 1/4 inch screw hole: the case can compatible with any 1/4" tripod. or you can DIY your kit. Sides open allow quick connection of HDMI & USB ports cables. with the Cold Shoe: you can mount a flash, video light, microphone on this case.
  • 【With Metal Back Door,A Security Door for your Gopro's Safety】with aluminum alloy back door.your Gopro camera will be more safety during high-velocity sport or daily using. No more worries about your Gopro camera will falling out. you can just enjoy your shooting time..
  • 【More Durable Than Plastic Case + Multifunctional Essential Met....
Check Stock

Men's Adventure Magazines: In Postwar America

  • Compatible with Worker Swift, Cheetah 2.0, and Adventure Force Nexus Pro..
  • The Talon mag needs to attach the worker adapter together which can work with the short dart system Blaster..
  • Integrated ultrasonic synthesis without screws, more solid, easy to carry, can quickly replace the magazine, standard loading 10 rounds..
  • Lightweight and compact, ABS thickened inner wall, high-precision injection molding. Remove the original edge synthesis, design with one-piece ultrasonic synthetic, Which no screw to show more sturdy, It won’t get deformation or damaged when people stand on..
Check Stock