ReviewsInjector Nozzle Tester Pj 60

QPKING Electric System Circuit Tester,Automotive Electrical System Tools,9V-30V Electrical System Diagnostic Tool With 2.4-inch LCD Display

• [Oscilloscope Mode&Relay Test]: Car Electric System Tester is not only able to display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc, but also can test the common automotive relay, like 5-terminal relays, and 4-terminal relays..
• [Component Activation&Injector Mode]: It can generate "Active" signals for components, such as lights, motors, and other on-board electronic devices. Also different pulse signals can be output to the injector, which provides 4 pulse modes to better detect the condition of the injector..
• [0-5V Power Supply&Voltage Alarm]: Capable of setting 0-5V output voltage, used to verify the wiring condition of the tested component. Equipped with voltage setting alarm. If a short circuit or fault causes the voltage to be greater than or less than the set value, the device will alarm..
• [Multi-language Feature]: 14 languages supported, English, Spanish, German, Russian, Italian, Polish, Portuguese, French, Vietnamese, Malaysian, Filipino, Indonesian, Arabic and Thai..

JUNE CHEN Wax Injection Machine for Jewelry Wax Injector 5.5LB Tank 110V 500W Wax Casting Machine with Double Nozzle for Wax Injection

• 【Description Features】With good performance for complicated jewelry workpiece.
• Inner wax pot made from special aluminum alloy material which is with good, fast and even thermal conductivity, thus could inject waxaround the temperature of 65 celsius degree. Moreover, it is easily washed. Thermostat used are high accuracy range 80C-100C..
• 【Parameters】Voltage: 110V, 60Hz. Temperature precision: +/-0.1°C. Max compressed air range: 0.30-0.70MPa. Thermostat our wax injector used is high accuracy with 30-110℃ range.
• 【EASY TO CLEAN】-Aluminum tank with fast and even thermal conductivity is provided for quick heating of wax, and it is easy to wash..
• 【DOUBLE NOZZLE】 - Pressure regulator with safety valve. Our wax injector features double nozzles for wax injection.
• 【WIDE APPLICATIONS】-The 500W wax injector with 2.5kg capacity tank, with good performance, is ideal for complicated jewelry workpiece.

Power Probe IV Master Combo Kit - Red (PPKIT04) Includes IV with PPECT3000 and Accesso

MAHLE S42246.030 Engine Piston Ring Set

• 6 - BOLT, M10 X 1.5 X 70.0 (12.9001) 6 - WASHER INJ CLAMP BOLT CARBURIZED S60 6 - O'RING UPPER E3 INJECTOR S60.
• 6 - O'RING-MIDDLE INJECTOR S60 E3 2007 6 - O'RING-LOWER INJECTOR S60 E3 2007 6 - WASHER INJECTOR (14L, S60).

LAUNCH CNC-603A Ultrasonic Fuel Injector Cleaner and Tester 110V Automotive Fuel Injection Systems Cleaning Machine for All Petrol 6 Cylinder [Update of LAUNCH CNC602A]

• [Wide Range of Applications]: LAUNCH CNC603A car fuel injector tester and cleaner upgraded from LAUNCH CNC602A, and it has a good compatibility. Supported most cars and motorcycles to ‘clean’ and ‘test’ fuel injectors..
• [Leading Technology]: At present, only LAUNCH TECH produces this portable and multi-functional automobile fuel injector cleaning and testing machine, and it has obtained a special patent..
• [Why Need It]: Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder, accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector, cause damage to the engine, so the injector should be cleaned regularly..
• [Easy to Operate]: When cleaning or testing, fix the car injector in the socket of the washing tank, add an appropriate amount of cleaning fluid, and the cleaning can be completed after power on.
• when testing, fix the car injector in the oil separator and add it to the glass tube industrial alcohol, the test or clean can....

TRENDnet Inline PoE Tester, TC-NTP1, Tests 4PPoE, PoE+, PoE & Passive PoE Technology, Wattage, Voltage, Amperage, Polarity, LED Display, Battery-Free, Troubleshoot PoE Issues, IEEE 802.3af/at/bt

• PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection.
• TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD.
• USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box.
• COMPATABILITY: The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V..
• STEP BUTTON: The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring..
• TROUBLESHOOT IN REAL TIME: Troubleshoot PoE issues in real-time on-the-go and accurately test 4PPoE, PoE+, PoE, and passive PoE technologies with this compact and lightweight PoE testing tool..

Tempono Pressure Washer Soap Injector Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit 4000 PSI 3/8 Inch Quick Connect

• Pressure chemical injector ensures that chemicals do not pass through the pump. Protect the performance of the pump and extend its service life..
• Chemical injector kit has 10 ft tube, soap injector, filter, nozzle and teflon tape. Max pressure is up to 4000 PSI..
• Chemical injector has an metering valve. You can control the concentration of the liquid. Flow rate is 2 to 5 GPM..
• Downstream injector for pressure washer with 3/8 inch quick connector. Please pay attention to mark of arrow direction on injector, do not install it....
• The coupler is made of stainless steel and brass, sturdy and durable. Siphon hose is made of high-quality PVC, suitable for hot and cold water..

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

• FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
• UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
• 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....

PWACCS Adjustable Soap Chemical Injector for Pressure Washer, Downstream Injector for Power Washer, 3/8 Inch Quick Connect

• Attention: Pressure washer chemical injector's working pressure is from 1000 to 3200 PSI. Flow rate: 1.5 GPM to 4 GPM. The presure which is higher than 3200 PSI will not work. Include chemical injector, 10 Feet tubing, filter and black soap nozzle..
• Application: Downstream injector for pressure washer is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals..
• Chemical injector has standard 3/8’’ quick connect plug and 3/8’’ quick connect socket. Soap injector for pressure washer connects pressure washer pump to hose. Adjusts the dilution ratio of chemicals and water by metering valve..
• Dilution ratio of chemical vs water can been adjusted by controlling metering valve. Ideal for most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer..
• If the pressure washer chemical injector kit have any questions, please contact us at first time. We provide a service of quick reply within 24 hours..

Injector Cup Nozzle Tube Remover and Installer Tool Alternative to J-47388-A W470589000700 for Detroit Diesel DD13 DD15 DD16

• APPLICATION--This tool is used to remove and replace the injector cups/tube/nozzle for Detroit Diesel/Mercedes Benz Trucks DD13, DD15, and DD16..
• FEATURES-- Uniquely designed to remove injector cups/nozzle/sleeve as the jaws will hold the cup from the bottom while the o rings provide assistance on the sides as you unscrew the cup from the top.(NOTICE--Remember to drain the coolant before removing the injectors cups).
• HIGH QUALITY MATERIAL--Made of high standard Carbon Steel and Aluminum, with black print coated , great strength and no deformation, durable to use..
• REPLACEMENT-- Alternative to J-47388-A W470589000700 MH064002 PRO0700 . Precise made with OEM data and directly replace.
• SATISFACTION GUARANTEE: If you're not 100% satisfied with this Injector Cup Remover Installer, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..

M MINGLE Adjustable Chemical Injector Kit for Pressure Washer, Soap Injector, 3/8 Inch

• ★Attention: Max pressure is 3200 PSI. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing (siphon hose), filter and black soap nozzle..
• ★Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying..
• ★Control metering valve to adjust dilution ratio of chemical and water. Chemical-resist and poly strainer reduces injector clogging..
• ★Soap injector has universal 3/8’’ quick disconnect. It connects between pressure washer pump and hose..
• ★Flow rate is from 2 GPM to 5 GPM. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer..