ReviewsInlet Manifold Adapter

NEW HOLLEY STREET DEMON CARBURETOR,SHINY,625 CFM,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES

  • ...tion and dual mounting pattern make it run-ready for a large variety of engines and vehicles!.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

Speedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He

  • Satin Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application. This Speedmaster LowRise manifold is a direct replacement for the stock manifold on 1957-95....
Check Stock

Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • STRAIGHT MANIFOLD - Milled red aluminium body with nickel plating steel quick connectors for added durability and a leak free fit. The manifold body is made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings..
  • COUPLER AND PLUG - 1/4" I/M type coupler and plug are made of nickle plated steel with anodized aluminum sleeves. The steel plug is heat treated to reduce abrasion on critical mating surfaces. Couplers are designed for high corrosion resistance, longer life and smoother operation..
  • INTERCHANGEABLE - Hromee air manifold kit has an aluminum In Line style with an inlet of 1/4 inch NPT and 4 outlets of 1/4 inch NPT sizes. It is compatible with Industrial "M", "D", and "I/M" type plugs and couplers. The max working pressure is 300 PSI..
  • SAVE YOUR TIME - This air tool allows you to connect and operate three tools from a single compressor and no need to disconnect your line when you want to switch tools. It also allows you to be able to connect to different types of connections without changing tools and hoses. You can also work with 4 different tools at the same time. You will get the job well done with ease in a less time..
  • EASY TO USE - The pneumatic manifold is equipped with quick connect....
Check Stock

TC-Motor Racing Performance Mikuni VM22-3847 Carburetor Carb manifold 38mm Air Filter For Predator 212cc GX200 196cc Go Kart Mini Bike (Blue)

  • ...wersports BK200 / Powersports BT200X / Powersports CT200U Trail / Powersports KT196 / Mega Moto Mega Max (MM-B212MX) Mini Bike / Moto / Mega Moto MM-B212 / Predator 212cc 6.5 HP / TrailMaster Buggy Interceptor / TrailMaster MB200-1 /.
  • Other spare parts:Apart from VM22 carburetor, air filter, fuel filter,Inlet Pipe Manifold. At the same time, we also have intimately equipped with other parts that may need to be used, 10 models Carburetor Carb Main Jets(#88-#125),Gaskets,Mounting Screws,Three types of wrenches.
  • Package Include:1 pcs carburetor,1 pcs air filter,1 pcs fuel filter,1 pcs Inlet Pipe Manifold,1 Set Gaskets,1 Set Carburetor Carb Main Jets ,3 pcs wrench,1 set Mounting Screws.
Check Stock

Sierra International 18-1971 Elbow

  • Fits: Angled 0° YX-06 Inlet Intake Manifold Pipe 27mm For YX 125cc 140cc 150cc 160cc Engine Pit Dirt Motor Bike Motocross Motorcycle.
  • Guaranteed Good Quality & Made From the Highest Quality Materials Available.
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock

BULL BOOST 6 Port VACUUM Block Intake Manifold Fuel Gas Turbo Boost NOS Black (1/8')

  • Made of high quality aluminum alloy.The surface is anodized for a long lasting, brilliant finish.This is a perfect modification accessory..
  • Billet vacuum manifold kit is a great add-on for additional vacuum sources. It has 6 ports, and also comes with plug if tuner don't require that many ports. This will ease up all the trouble for splitting up lines and making extra ports if needed..
  • Includes six 1/8" vacuum ports.Includes two 3/8" inlet-outlet fittings. With 4 block-off plugs. With 1 inlet-outlet block-off plug. With mounting hardware..
  • Great to tie in Boost Controllers, Gauges and any components that require a separate vacuum source..
  • A Brand You Can Trust / Ships SAME BUSINESS DAY!!.
Check Stock

DNA Motoring HDS-SSAM86 Stainless Steel Exhaust Header Manifold

  • Made of high quality T-304 Stainless Steel material.
  • Inlet/ outlet: 1-1/2" OD mm/ 2-1/2" OD mm.
  • 4-2-1 full length header design/ replaces OEM manifold.
  • Increase high flow air, instantly gain 10 -15 HP./ TQ..
Check Stock