ReviewsInline Gas Flow Meter

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..

Check Stock

Fill-Rite FR711VA Cast Iron 115V AC Fuel Transfer Pump with Discharge Hose, 901-Gallon Meter, and High-Flow Automatic Nozzle, Red

HIGH-FLOW FUEL TRANSFER: Rotary vane high-flow fuel transfer pump designed for gas, diesel, and biodiesel.
MADE IN THE U.S.A.: High-flow pump features heavy-duty cast iron construction.
EASY TO USE: Easy-to-read 4 digit mechanical meter.
30-minute duty cycle with 20GPM flow rate.
NOZZLE INCLUDED: Fuel pump with an iron rotor and carbon vanes.
includes a 1-inch x 18-foot static wire and high flow automatic nozzle.
1/3 HORSEPOWER: Flow pump with a 901-gallon meter and 1/3 horsepower motor.

Check Stock

6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings

Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.

Check Stock

OYHBO Argon/CO2 Flow Meter Gas Regulator Guage for TIG MIG Welder Welding Gas-saving CGA580 Inlet

...ssure and leaking during use, make your welding more safer..
✔Heavy Duty&Rust-proof - Our Argon CO2 Gas Regulator features heavy duty brass body, which can withstand harsh environments. Its base is made of qualified aluminium alloy, not get rusty and longer using-life..
✔Ideal for TIG/MIG Welding - Our argon flow meter gas regulator is accurate and efficient by professional design, ideal for TIG/MIG welding, cutting, chemical and electronics industry. If for any reason you're not 100% SATISFIED, please let us know. We will provide you with the best solution.Thanks..

Check Stock

TOPCHANCES Portable 0-200ml/min Digital Gas Air Nitrogen Oxygen Mass Flow Meter Gas Air Flow Rate Tester MF5712 Compressed Air Digital Display Tester for Inactive Gas

Ultra low power by batteries or optional external AC adaptor.Internal data storage for additional data safety..
Potable design with rotatable meter head and easy exchangeable mechanical adaptors..
Hygienic and oxygen safe copper body for various fluids.User programmable range alarm for safety and other monitoring/control functionality..
Applications:MF5706 Gas mass flow meter suitable for different gas(Like air, compressed air, oxygen, nitrogen, CO² and other inactive gas ect.)....

Check Stock

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
【Two Connection Ways】You can choose the connection method according to your needs..
【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..

Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.

Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Brand New BETOOLL Argon / CO2 regulator and flow meter..
Flow Meters are more accurate than the flow gauge regulators..
The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..

Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.

Check Stock

PROWELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Accessory for Welding Machine

PROWELD Argon / CO2 Regulator and Flow Meter is a pressure reduction equipment to reduce the pressure of cylinder holding various kind of gas under....
Outlet of the Flowmeter will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It comes with a standard 1/4" barbed fitting..
Can retain steady pressure output even the input pressure and input flux changes. Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated....
Argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
Majorly used for welding,slicing,chemical industry,analyzing,testing and other industry usage..

Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..

Check Stock