ReviewsInner Arm Shaft Kit

Detroit Axle - 8 Lugs Front Wheel Hub Bearing + Upper Control Arm w/Ball Joint Suspension Kit Replacement for Silverado Sierra 2500 3500

Replacement for 4WD & 3-Groove Pitman Arm Models.
Idler Arm Does NOT fit models with Rack & Pinion Steering.
Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
Kit Includes: 2x Front Wheel Hubs & Bearings + 2x Front Upper Control Arms w/ Ball Joints + 2x Front Lower Ball Joints + 2x Front Sway Bars + 4x Outer & Inner Tie Rods + 1x Idler Arm + 1x Pitman Arm + 1x Idler Arm Bracket Assembly.
Hub Specifications: Position: Front | Lugs: 8 Bolt | ABS Type: Sensor Wire | Flange Type: 4-Bolt Square.

Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

...ack 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you in time..

Check Stock

SCITOO 10pcs Front Suspension Kit Inner Tie Rod End Outer Tie Rod End Adjusting Sleeve Lower Ball Joint Upper Ball Joint Fit 1980-1996 For Ford For F-150 Bronco

【Suspension Kit Fit】 - 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 For FORD BRONCO All Models, 1980 1981....
【Suspension Kit Include】- 1x DS1017T Front Inner Tie Rod End - Driver Side, 2x K8195T Front Lower Ball Joint, 1x ES2078LT Front Outer Tie Rod End....
【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering.
【Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And....
【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim....

Check Stock

SCITOO 13pcs Front Suspension Kit All Model Front Upper Control Arm Lower Ball Joint for Silverado Sierra 1500 for Chevy for GMC Tie Rod Sway Bar 4 groove Pitman Idler Arm replacement auto parts

...r Chevrolet Silverado 1500, 2007-2007 for Chevrolet Silverado 1500 Classic, 2000-2006 for Chevrolet Suburban 1500, 2000-2006 for Chevrolet Tahoe, 1999-2006 for GMC Sierra 1500, 2007-2007 for GMC Sierra 1500 Classic, 2000-2006 for GMC Yukon, 2000-2006 for GMC Yukon XL 1500.
【INCLUDED COMPONENTS】 - 2x ES3488 Front Inner Tie Rod End,2x K6541 Front Lower Ball Joint,2x ES3493T Front Outer Tie Rod End,1x K6534 Front Steering Idler Arm - Heavy Duty,1x K6536 Pitman Arm - with 4 Grooves - Heavy Duty,2x K8987 Front Sway Bar End Link,1x K6723 Idler Arm Bracket Assembly and Grease,2x K80942 Front Upper Control Arm And Ball Joint with Standard Bushings.
【WHEN TO REPLACE SUSPENSION KIT】 - ①Steering noise such as snapping, popping, creaking or groaning sounds when turning.②Feeling every bump:Suspension noise such as clunking, rattling or popping on rough roads.③Difficulty when steering: ”Memory steer” or poor steering return where the car doesn’t want to go straight after turning due to binding in the upper mount..
【SUSPENSION KIT BUYER'S GUIDE】 - A Suspension Kit is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system.this suspension auto parts directly replaces the original assembly....

Check Stock

2 Sets M14 Torque Arm Universal Torque Arm for Electric Bicycle Front or Rear Wheel

Function: This product is used to strengthen the wheel and frame to prevent the wheel from falling off. Maximum safety for cyclists..
Applicability: This torque arm is suitable for most Ebike Conversion Kit, except for special shafts, please note that the size of the motor shaft does not exceed 14mm.
Excellent material: Torque arm is made of high-quality metal alloy, galvanized, corrosion-resistant, durable, and will not be easily deformed..
After-sales service: We guarantee 6-month after-sales service. If you have any problems during use, you can contact our customer service and he will answer you in detail..

Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
Coast to park with adjustable right or left self parking. RF shielded circuitry.

Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
Coast to park with adjustable right or left self parking. RF shielded circuitry.

Check Stock

Metra 99-6507 Single DIN Installation Kit for Select 2004-2008 Chrysler/Dodge/Jeep Vehicles & 40-CR10 Chrysler/Dodge/Jeep/Ford/GM 2002-Up Car Antenna Adapter

Product 1: Professional installer series Turbo Kit offers quick conversion from din to 2 shaft.
Product 1: Designed to mount precisely to the oem radio mounting location.
Product 1: Radio support is provided from our patented side arm support system.
Product 1: Install dash kit for Single DIN/ISO Radios.
Product 2: Antenna to Radio Adapter Cable.

Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..

Check Stock

Detroit Axle - Front Inner and Outer Tie Rods + Pitman & Idler Arm Replacement for Silverado Sierra Suburban Avalanche 1500 Escalade Tahoe Yukon - 6pc Set

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
Kit Includes: 4x Front Inner & Outer Tie Rod End Link + 1x Idler Arm + 1x Pitman Arm.
Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.

Check Stock

ABN Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller 5 Piece

Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller, Constructed from high strength steel for extra durability and longevity.
Allows users to easily service all types of front end issues, everything from tie rods, u joints, ball joints, pitman arms, and others.
Includes: 1x Pitman Arm/Tie Rod End Puller, 1x Ball Joint Separator, 1x Pitman Arm Puller, 1x Ball Joint/Tie Rod End Remover, 1x Tie Rod/Inner Bearing Race Puller.
Specifications: Large C-shape puller: (1) 1-11/32" Jaw Spread 2-1/2" Throat Depth, (1) Small C-shape puller 1-1/8" Jaw Spread, 2-1/8" Throat Depth, (1) Large swing arm puller 0 to 2-1/2" Jaw Spread 3-1/4" Throat Depth, (1) Small L-shape puller: 3/4" Jaw Spread, 1-3/4" Throat Depth, (1) Large rocker arm puller: 7/8" Jaw Spread, 2-1/4" Throat Depth.
This is a must have for anyone servicing vehicles.

Check Stock