ReviewsInnovative Puller Tool

Grootpow Weed Puller, Stand Up Weeder with 39" Long Handle, 3 Claws & Fiberglass Foot Pedal, Root Removal Hand Weeding Tool - Made with Cast-Aluminum, Easily Remove Weeds Without Bending or Kneeling

  • Innovative Design - Innovative automatic retractable spring device design and convenient sliding handle form a weeding release system, the system allows you to release the weeds after removing the weeds, truly hands-free weed pulling for less work and mess.
  • Equipped with folding foot pedal, easy to store and adjust the folding foot plate, you can use it even on slope.
  • Never Crack - The foot pedal of Grootpow weed remover tool is made of fiberglass instead of plastic, the shaft and the pedal connection are made of cast aluminum, you never have to worry about breaking or cracking, when you are working in hard soil like clay.
  • and the stand up weeder ensures super durability and long-term use.
  • Down to the Root - Comes with a special 3-claws design, the long and sharp stainless steel prongs can firmly grab weeds and roots of thistles, dandelions, crabgrass, chickweed of all soil types without breaking roots.
  • Permanently remove weeds in your yard with this 3-claw weeder by Grootpow.
  • No More Bending - Long 39" aluminum shaft eliminates sore knees from kneeling and backache from bending and stooping, saving 80% energy with les....
Check Stock

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

  • 【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
  • 【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
  • 【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
  • 【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
  • 【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

Prokomon 13 Pcs Embedded Bearing Puller Kit for 6004-6010 6201-6206 6300-6302 Insert Wheel Bearing Removal Tool with 6 Pcs Ball Ended Threaded Puller Adaptors

  • ◇ Embedded Bearing Puller --- The bearing puller is used to dismantle automotive bearings. When a normal puller cannot remove the bearing, using this tool can help you complete the removal task..
  • ◇ Applicable ISO Bearing Sizes ---The wheel bearing removal tool is suitable for ISO bearings of sizes 6004-6010,6201-6206 and 6300-6302..
  • ◇ High Quality Materials --- Bearing puller tools are made of hardened and tempered steel, chemically plated black for excellent corrosion resistance and improved service life, providing you with long service..
  • ◇ Easy To Use --- First choose the right slider, put the slider into the bearing housing ring, rotate it 90 degrees, install the right post, then install the crossbeam and the top screw, turn the screw clockwise and pull out the bearing..
  • ◇ 13 Pcs Set--- Bearing removal tool pack contains centre screw thread cap,6 x ball ended threaded puller adaptors,2xleg extensions,and puller yoke with centre screw and twin arms..
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

Zenith Industries ZN700001 Trim Puller Black

  • THE ORIGINAL PATENTED TRIM PULLER IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing....
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated....
  • THE AUTHENTIC, REVOLUTIONARY, TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or....
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering....
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to....
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Dent Puller Kit, 56pcs Paintless Dent Repair Kit with T-bar Dent Puller, Double Pole Bridge Puller & Hot Glue Gun, Dent Removal Kit for Car Refrigerator Motorcycle Minor Dent and Deep Dent Remove

  • Paintless Dent Repair Kit: It is entirely paintless dent removal, The T-bar dent puller and double pole bridge puller are made of tempered high-carbon stainless steel and standard stainless steel, in the parts of the body contacted by the high-quality rubber, and the hot melt can be wholly removed without damaging the original paint. Tips: Recommended for cars with original paint, we are not recommended to use the repair kit if your paint gets damaged before you repair the dent.
  • Easy to Use: The dent puller kit is suitable for both professional and green hands. Using the principle of leverage to design the dent puller is ergonomic, easy to use, and can pull out dents easily, most of the dents can be removed within 30 minutes. Also, we offer detailed manuals to guide you, please don’t hesitate to contact us if you need help..
  • Widely Used: T-bar dent pullers come with 2 different puller lines. For big dents, you can use the puller lines to assist. For small dents, you can use the small blue glue tabs. Meanwhile, The remover can be detached into a short T-bar puller, with 25 glue tabs. Newest double pole bridge dent puller, You can insert the blue spacer directly, also insert the black spacer directly. Simpler and more versatile! 30 pcs different shape ....
Check Stock

Trim Puller Tool for Baseboard,Wood Trim Removal Tool for Floor Tile,Molding,Flooring,Siding, Trim Puller with 2PCS Noise Reduction Cover

  • 【HARDENED STEEL TRIM PULLER TOOL】This Baseboard Removal Tool is made of hardened High-strength forged steel, Black matt coating, anti- rust and corrosion,can resist repeated heavy leverage well..
  • 【LABOR-SAVING DESIGN 】 The trim puller tool for baseboard is with sharp edge can be easily driven into the seam of tiles ,baseboards and flooring without damaging the walls and floor, 15 degree wedged center design enables your removal work more efficiently.it can competent with the work of the crowbar, trim bar and wrecking bar..
  • 【Ergonomic Handle】The trim puller is molded with EDPM rubber handle, anti-slip pattern design provides exceptional shock-absorbing , prolonged handle easy to grip , time and strength saving..
  • 【MULTI-USE TOOL】This Tile Removal Tool with nail puller is Multi-function home improvement tool can be widely used in removing molding,door window decorative Panel ,carpet tack strip, glued countertops and other home renovation work..
  • 【NOISE REDUCTION COVER】The trim removal tool equipped with 2pcs noise reduction cover ,which protect you from hearing hurts specailly when you work long time in tile removal,molding trim ,kitchen remold or other home improvement work..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389

  • Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385

  • The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock