ReviewsInput Filter

American Bass PH-2500.1-MD-V2 Class D Digital Power Car Amplifier

Independent REAMPING and DI functions 2 in 1 Guitar Effect Pedal, DI features low-cut, phase reverse, stereo mix and more, REAMPING Input Jack: 6.35mm and XLR 2 in 1 Input Jack, accepting both 6.35mm TRRS and XLR..
No need of battery,48V phantom powered DI box, high dynamic range, retaining the nuances of instruments' sound. ..
Grounding switch turns off the internal grounding channel between the Input& Output, High Input Impedance reduces pick-up loading..
Low-cut filter, -1 5dB attenuation, it features polarity reverse..
Suitable for signal switching during professional recording and live performance..

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

Easy-to-read display: navigate menus, interact with the AFS2 Wizard, and easily manipulate settings with the bright, legible, interactive display.
Xlr and 1/4” TRS connections: interface with any professional audio equipment with either connection.
Input signal meters: accurately monitor input signal levels with five segment LEDs per channel plus red clip LED indicator.
Wizard functions: the AFS2 feedback suppression Wizard makes setup easy and approachable for users with varying levels of technical know-how.
24 programmable filters per channel with 24 LED per channel filter metering.
application-specific filter types include: speech and music low, Med and high.

...Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside..

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

USB/SD/Bluetooth Player / Power on/off switch with LED indicator /.
Microphone input jack / Microphone level control / Bass/midrange/treble/loudness/balance controls.
Master volume control / High/low frequency filter / Input source selector.
Aux/MP3/FM Tuner/USB/SD/BT/input RCA jacks / Tape monitor switch.
Tape monitor switch / Rack mount design / 110V - 220V switchable.

Vacuum Cleaner/Air Duster 2-in-1: It's not only a powerful cordless vacuum cleaner but also an air duster(blower). One side of the cleaner is to absorb dust and the other side to blow away dust, which gives you efficiently cleaning experience.
Long Lasting: The laptop vacuum adopts high capacity which makes working time up to 50 minutes. The mini size and lightweight makes it convenient carrying to clean keyboard, computer, laptop, cars, office desk, pet hair, dog hair, cat hair, pet house, crumbs, scraps, etc.
Ultra Long Life：The mini vacuum cleaner ensures at least 1000 cyclic charging times and 5 years lifetime for dust buster.
Fast & Safe Charging System: The cordless vacuum can be fully charged in 3-4 hours (Usb charging port design). To ensure safety of the equipment during charging, the vacuum cleaner is designed with multiple protections: short circuit protection, temperature protection, input voltage protection and input current protection.
Removable & Washable Vacuum Filter: The hand vacuum filter can be taken out and is water washable. Using tip: If the vacuum filter is full of dirt or suction weakens, please clean the filter in time to make sure the dust buster can work normally.

Fully differential all-tube circuitry, plus custom-wound Manley input & output transformers for that big MANLEY sound!.
Dual Input knob lets you find your favorite balance between cleanliness and full-on saturation.
Independently regulated B+ and heater power supplies for maximum performance.
Dual Input, Attack, Recovery, Threshold, Output, LINK, and High-Pass side-chain filter for versatility.
Unit is hand-wired with silver solder and audiophile-grade componentry.

Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control.
Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz.
Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz.
Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.