ReviewsInput Voltage 12v

Anbull 800W SMPS 110V AC to 12V DC Converter Power Supply Adapter Switch Transformer Max Current 66.7A

Dual input voltage: AC 110V-120V / 220V-240V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/120V or 220V/230V.Output current depends on the decive, such like 10A 120W, 20A 240W, 30A 360W,and the max current is 50A,power 600W. ..
How to choose: The peak power is 50A,600W. It does not mean it can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
Safe and Stable,Long Service Life:Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions.Light and Portable,Easy to Operate: Net weight only 1.2 Kg. Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design.( US patent no : D954,647).
Make It Easy : Open circuit on the head, compared wit....

Check Stock

Lights88 Laser Module Red\Line\ Laser Generator 650nm 5mw (2 Pack) Diode Lasers

12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board.
Input Voltage: DC 8-14V Max. Output Voltage: DC 12V (adjustable) Max.
For Red, Green and Blue Laser Drive Power.
AC / DC can be used, regardless of positive and negative input to improve the non-professional user convenience.

Check Stock

MARK LAUREN Workout DVD - Bodyweight 90-Day Challenge | Total Fitness Bodyweight Exercise Program

✔【Input&Output】: 100-240V AC input 50/60HZ, DC 12V 1Amp output, 12 Watt max wattage..
✔【Wide Application】: Convert 100-240V AC to 12V DC, widely use for SMD2835 3528 5050 RGB LED strip lights, LED string, routers, ADSL Cats, HUB, switch, security camera, Audio/Video power supply..
✔【Kindly Note】: The power adapter cannot be used as a charger. Please confirm that the output voltage of your electrical appliance is 12V before order. If the output voltage is lower or higher than 12V and the output current exceed 1A, please do not order! ! ! ! .This will cause the adapter to not work. Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage（12 Watt) of this adapter..
✔【Package Includes】: 1 x 12V 1A 12W power supply with 3.3ft power cord..
✔【Product Support】: Customers can get a full refund within 30 days or get a new product for free within 1 year due to product quality problems. We stand behind our products, please feel free to contact us via amazon "contact us" button..

Check Stock

New Version Converter, IMAYCC 110V AC to 12V DC Power Supply Transformer Adapter Charger Max 600W 50A

...r build with aluminum alloy shell, built-in wire integrated design, dual power connection methods, very convenient for 12V devices with clamps, all copper nickel-plated terminal material, which has good electrical conductivity and high conversion efficiency..
【Dual Input Voltage】Input voltage support AC 110V-120V and 220V-240V. Output range (12V, 1A-5A/12W-60W ) or (12V, 10A-50A/120W-600W). Voltage input will adjust automatically to SMPS model, Output current mainly depends on your device, such as 10A/120W, 20A/240W, 30A/360W. Max current up to 50A, Power 600W..
【Smart Cooling System】Item Shell are designed with many heat dissipation holes, built-in cooling fan and dust-proof net, which effectively prevent dust from entering, ensure the stable rotation of the electric fan and prevent the circuit board from burning.
moreover, anti-skid pads are added to the bottom, which can also make the bottom better heat dissipation and work more stable..
【Safe and Reliable】This 12V power supply carry overload, overvoltage, Leakage and short circuit protection function, compare with others , IMAYCC 12V power converter power co....

Check Stock

CBI Tools New Cable and Wire Grip 2000lb Capacity - Cable Size 3/32"-5/8"

【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....

Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..

Check Stock

ZVS Tesla Coil Flyback Driver/Marx Generator/Jacob'ladder Ignition Coil 12-36V

Voltage of the input voltage of about 1000 times.
A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them “ZVS circuit”. Because of its big power, low heat, simple and reliable by fans are widely used in the drive spark gap tesla c.

Check Stock

SainSmart Zero Voltage Switching Tesla Coil Flyback Driver for Sgtc /Marx Generator/jacob's Ladder + Ignition Coil

SainSmart is professional in electronics and provides high quality product and service.
voltage of the input voltage of about 1000 times.

Check Stock

New Version AC to DC Converter, EAGWELL SMPS 110V AC to 12V DC Converter Power Supply Adjustable Switch Power Supply Transformer Max 50A 600W

...l's 50 amp power supply come with ul power cord ,12v converter with switch ,wire lugs,metal clip and screw.Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design of 12v dc power converter..
【ADJUSTABLE VOLTAGE】12 Volt Power Supply is AC to DC 12V Converter.Input voltage Support AC 110V-120V / 220V-240V , Output Range (12V 1A-5A, 12W-60W ) or (12V 10A-50A 120W-600W) ,voltage input will adjust automatically to SMPS Model ,Output current Mainly depends on your device, such as 10A 120W, 25A 300W, 40A 480W, Max current up to 50A,Power 600W..
【HOW TO CHOOSE】The peak power is 50A,600W. It does not mean 12v power supply can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
【SMART COOLING SYSTEM】600W Power Converters Aluminum Shell are designed with many heat dissipation holes, Built-in Cooling fan and dust-proof net, which effectively prevent dust from entering, ensure the stable rotation o....

Check Stock

Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter

No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..

Check Stock

FOVAL Power Step Down 220V to 110V Voltage Converter with 4-Port USB International Power Travel Adapter in China UK European Italy Asia etc, More Than 150 Countries Over The World

Dual input voltage: AC 110V-120V / 220V-240V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/120V or 220V/230V.Output current depends on the decive, such like 10A 120W, 20A 240W, 30A 360W,and the max current is 50A,power 600W. ..
How to choose: The peak power is 50A,600W. It does not mean it can fit rate power 600W. For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK..
Safe and Stable,Long Service Life:Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions.Light and Portable,Easy to Operate: Net weight only 1.2 Kg. Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. It is a patent design.( US patent no : D954,647).
Make It Easy : Open circuit on the head, compared with other closed circuits, is easier to use, convenient to meet the wiring needs of various equipment, and more conducive to rebuildin....

Check Stock