ReviewsInput output Isolation

Outlaw Model 7000 x 7-Channel Power Amplifier | 7x130 Watts Continuous | High Current Class AB Amplifier | XLR & RCA Inputs |

Balanced XLR inputs with Common Mode Rejection.
Differential-sensing RCA input circuit designed to reject input hum.
Independent power supply rectification for each of the 7 channels, to ensure excellent isolation..
Separate output protection relays for each channel, designed to disengage the speaker from the amp in the unlikely case of a short, or excessive DC....
A modular audio channel design to ensure each audio signal is isolated from the other channels, from input all the way to output..

Balanced XLR inputs with Common Mode Rejection.
Differential-sensing RCA input circuit designed to reject input hum.
Independent power supply rectification for each of the 5 channels, to ensure excellent isolation..
Separate output protection relays for each channel, designed to disengage the speaker from the amp in the unlikely case of a short, or excessive DC offset..
A modular audio channel design to ensure each audio signal is isolated from the other channels, from input all the way to output..

USES: SZT20-CH-420E AC current sensor can measure the AC current in the grid or circuit in real time and convert it to 0-5V / 0-10V or 4-20mA DC current output signal..
VERSATILE: It can be combined with various AD to form a variety of digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or match the traditional analog and digital indicating instruments, display the measured values..
EXCELLENT ATTRIBUTES: mutual current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
HIGH PRECISION: The product has a hysteresis of less than 1% and can be used in strong magnetic field conditions..
ADVANTAGES: It has the characteristics of strong overlapping ability, high precision, high isolation, high safety, low power consumption and strong anti-interference ability..

【Premium Material】100% brand new and high quality, it can also be used as a combiner to combine signals into one channel for output..
【Low Loss】The power divider has wide operating frequency, low insertion loss, high gain, high isolation and stable performance..
【Good Performance】There should be a certain degree of isolation between the output ports of the power divider, and the input signal of one channel....
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and....
【Quality Service】We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about....

✔[Specification] -- Dual-way SCR input, starting voltage is zero volt and Ioff is zero..
✔[Feature] -- Opto-isolator is between the input circuit and the output circuit.Isolation withstand voltage is 2500V between input and output..
✔[Safety] -- Pass load-current aging test. Get ec CE certification and international ISO9000 certification..
✔[Design] -- LED light displays the working status in real time,easy to use..

Price For: Each No. of Channels: 1 Isolation Voltage: 3.75kV Optocoupler Output Type: Analog Input Current: 16mA Output Voltage: 3.8V Opto Case Style: DIP No. of Pins: 8 Bandwidth: 100kHz Forward Current If: 5µA RoHS Compliant: Yes.

Price For: Each No. of Channels: 1 Isolation Voltage: 3.75kV Optocoupler Output Type: Analog Input Current: 16mA Output Voltage: 3.8V Opto Case Style: SMD No. of Pins: 8 Common Mode Ratio: 15000 RoHS Compliant: Yes.

Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

The attenuation rate is 10X, which can be used in any brand of oscilloscope, meet the needs of floating measurement..
DP series high‑voltage differential probes, specially designed for the measurement of high‑voltage differential signals..
High‑voltage differential probes sample high‑impedance isolation between input and output to protect person safety..
The power supply adopts USB DC 5V output and has a USB interface, which is easy to use and carry..
Convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..

➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..