PF 420 by SurgeX
- Branch Circuit Surge Eliminator and Power Conditioner / Load Center.
- NEMA rated magnetic shielding steel enclosure.
ReviewsInrush Current Limiter
Mersen TRM Tri-Onic Time-Delay Midget Fuse, 250VAC, 10kA, 1-4/10 Ampere, 13/32' Diameter x 1-1/2' Length
- Optional solid state SmartSpot blown fuse indicator.
- Time-delay for motor start-ups and transformer inrush currents without nuisance opening.
- Current-limiting for low peak let-thru current.
- Rejection-style design prevents replacement errors.
- Easy-to-read label for quick brand recognition and replacement.
- Interrupting Rating 200 Kiloampere (Ac), 100 Kiloampere (Dc).
Mersen TR-R Tri-Onic Time-Delay/Class RK5 Fuse, 250VAC/160VDC, 200kA AC/20kA DC, 30 Ampere, 9/16' Diameter x 2' Length
- Optional solid state SmartSpot blown fuse indicator.
- Time-delay for motor start-ups and transformer inrush currents without nuisance opening.
- Current-limiting for low peak let-thru current.
- Rejection-style design prevents replacement errors.
- Easy-to-read label for quick brand recognition and replacement.
- Interrupting Rating 200 Kiloampere (Ac), 20 Kiloampere (Dc).
50 Amp 4 Pole Contactor Normally Open (N/O) 120V Coil, 32A Motor, IEC 63A, 60A DIN
- Normally Open (N.O.) main contacts Power status indicator.
- 110/120VAC Coil: 52VA inrush, 10VA sealed.
- Overall Size(Approx.) : 60 x 55 x 67mm / 2.4" x 2.2" x 2.7"(L*W*T).
- DIN rail included, Compliance: CE, and IEC/EN61095 DIN.
AmazonCommercial 600A AC/DC Clamp Meter, True RMS, NCV, Flashlight, 6000 Count
- Handheld clamp meter for taking voltage and frequency measurements.
- Compact size makes it easy to access hard-to-reach areas and compartments.
- Backlit LCD display for viewing and accessing measurements.
- Included components: test leads, carrying case, temperature probe, temperature probe connector, three 1.5V AAA batteries, user manual.
3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Wholesale Sensors Replacement for Norcold 618548 Thermistor Assembly 12 Month Warranty
- The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
- Characteristic: Small size and large power，large B value with wide range of operating temperature..
- Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
- Easy to store: Provide a high-quality box for easy management and storage..
- More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..