ReviewsInsert Tool

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).

Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..

Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.

Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..

Check Stock

Hoover CleanSlate Plus Carpet & Upholstery Spot Cleaner, Stain Remover, Portable, FH14050, White

POWERFUL SUCTION: Powerful suction for life size spots & stains.
TOOLS FOR EVERY MESS: You've got the tools for every mess with the 7” WidePath Tool for large areas like stairs and the TightSpot Tool for crevices and tough to reach areas..
PERMANENT STAIN REMOVAL: Permanently remove tough stains and spots. with the included Oxy Concentrate..
QUICK AND PORTABLE: Quickly remove spills, stains, and set-in messes with the portable CleanSlate that offers powerful suction and the tools you need for any job, large or small..
TYPES OF MESSES: Clean tough messes like mud, wine, pet messes and more from carpets and upholstery..
HOSE RINSE: Easy to clean, the Hose Rinse Tool flushes the machine with water to remove any left behind dirt & debris..
DUAL TANKS: The Dual Tank System has 40oz clean solution capacity so you can clean farther while clean water and dirty water stay separate..
BONUS 3FT. OF CORD & WHAT'S INCLUDED: 18ft. Cord, WidePath Tool with Bristles Insert and Rubber Nub Insert, Tight Spot Tool, Hose Rinse Tool, and 6oz Oxy Concentrate.

Check Stock

HFLYJPYW 6 Pack Hair snake Hair Drain Clog Remover Cleaning Tool, sink snake drain suitable for unclogging hair, kitchen sinks and bathtubs, toilets and sewer pipe drain cleaning tools.

Great value set of 6: 2 packs of 25inch and 4 packs of 20 inch Hair Drain Cleaner Tool .Perfect length, it’s flexible enough to insert deep tubes and pull out clogged hairs easily without removing the drain..
Good toughness: soft enough to bend all kinds of filters and pipes, drain blockage removal tool, upgrade 25 inch shower snake cleaning tool, flexible enough to insert deep tube, hold the ring, easily pull out the blockage..
Easy operate：just insert, spin, remove clog. Work for most bathroom drains without disassembling the drain stopper hair drain.
Wide Application: Great drain tool for kitchen sink, toilets, washbasin, bathtubs, and sewers，shower drain hair remover， sink snake drain flexes at P-trap where most clogs occurred.
Environmental protection and benefits: more environmentally friendly and convenient than toxic chemical drainage cleaners, more durable ABS plastic pipe cleaning tools, easy to rinse for repeated use..

Check Stock

Wiha 72596-WIH 084705725963, multi, one size

Included components: Blister Pack Hex Inch Insert Bit Set, 10 Pc. Set includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4". Bits made of hardened tool steel. 1"/25mm on 1/4" Drive..

Check Stock

Stainless Trampoline Spring Pull Tool Unbreakable

【Super-Strong and Practical Spring Pull Tool】 Unlike other cheap plastic trampoline spring pullers, our spring pulling tool is made completely of Stainless Steel and is in one piece, which is sturdy and durable ensure that it won't break during use, won’t hurt your hand..
【Simple To Use and Operate】Insert a spring (hook side down) into one of the trampoline mat's v-rings or spring loops, pull back with the spring tool and insert the other hook of the spring into the trampoline frame. Repeat the above actions until finished..
【Worry Free After-Sales Service】We stand behind all our products and offer full customer support! If you are not satisfied with our spring hook tool or service for any reason, please feel free to tell us and give us a chance to solve the problem. Your 100% satisfaction is our NO.1 priority..

Check Stock

Bergeon 31409 Tool for Winding Wristwatches Winding Stick Elastomer

Buzzufy LLC is AUTHORIZED Distributor of BERGEON SA, Switzerland.
Universal tool for winding wristwatches made of anodized aluminum with elastomer insert..
Ideal tool for winding mechanical wristwatches after repair. The soft elastomer insert adapts to different crown shapes and provides very good grip to the crown..

Check Stock

OSCARBIDE Carbide Turning Inserts MGMN200,11ER A60,WCMT2.5,CCMT060204,DCMT070204 CNC Lathe Insert for Indexable Lathe Turning Tool Holder Insert Replacement 7 Pieces

Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Designed for Steel, cast iron and non-ferrous materials.
Used for turning and finishing on a wide range of materials.
7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.

Check Stock

Accusize Industrial Tools 1/2'' Cut-Off Holder, Parting Tool, Mgehr08-2J of 2387-2004, Insert Not Included

Insert model for this holder: Carbide insert TiN Coated MGMN-2 Double End Cut-off.
For the Cutting Parameters, please refer to the product image..
The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Please note that this tool holder comes with NO insert installed. Only a holder..

Check Stock